淀粉分子磁化修饰及其再生膜材料制备

以高直链淀粉（HS）为原料，通过“还原胺化-点击化学法”在其还原性端的潜在醛基上进行磁化分子修饰，得到具有磁性的变性淀粉（MMS），并在外磁场作用下制备再生淀粉膜。具体包括在HS分子唯一的潜在醛基上引入炔基，对四氧化三铁粒子（MNP）进行硅烷包覆得到叠氮化磁体粒子（azide-MNPs），两者经点击化学反应得到分子链末端带磁的变性淀粉。借助XRD、FTIR、NMR和MALDI-TOF MS对产物进行结构表征，结果表明，磁体粒子精准接枝到高直链淀粉分子还原末端，得到目标产物MMS。再生淀粉膜性能测试结果表明，在外磁场诱导条件下MMS逐渐趋于分子有序排列，制得的再生淀粉膜较纯CMS淀粉膜断裂伸长提升49.5%，断裂强度提升88.3%，短程有序程度提高。该文为基于外加磁场下的淀粉再生膜结构设计和力学性能调控提供了新思路。     

Monodisperse polymer/metal composite particles by electroless chemical deposition: Effect of surface functionality of polymer particles

Micron‐sized polymer particles were coated with layers of nickel compounds by plating electrolessly in the presence of aqueous solutions of nickel chloride, sodium hypophosphite, sodium citrate, and ammonium chloride at elevated temperature. The uniform functional polymer particle could be obtained by seeded polymerization. To investigate the effect of surface functionality on the conditions for nickel deposition, the polymer particle was functionalized with the thiol group. From morphological observation, it was found that the mode of nickel deposition was greatly dependent on the surface functionality of the polymer particle. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 420–424, 2003     

N~1-(4-氨基丁基)-N~4-(9-蒽甲基)-1,4-丁二胺的合成

以N-叔丁氧羰基-1,4-丁二胺和N-(4-溴丁基)邻苯二甲酰亚胺为原料,经取代及保护两步反应合成N1-(4-邻苯二甲酰亚胺)丁基-N1,N4-二叔丁氧羰基-1,4-丁二胺(Ⅳ),然后肼解得N1-氨基丁基-N1,N4-二叔丁氧羰基-1,4-丁二胺(Ⅴ),3步反应总收率38%;Ⅴ与9-蒽甲醛缩合后用NaBH4还原,产物提纯后脱保护得目标产物N1-(4-氨基丁基)-N4-(9-蒽甲基)-1,4-丁二胺盐酸盐(Ⅶ),3步反应总收率约7 5%。化合物Ⅳ~Ⅶ的结构经13CNMR,1HNMR和ESI-MS确证,并对反应条件进行了初步优化。     

由双酚A结晶母液的裂解产物合成双酚A反应过程研究

对反应过程所需催化剂种类及其各影响因素进行了考察。研究表明，大孔强酸性离子交换树脂可替代无机酸作为催化剂用于该反应，其中以未经硫基化处理者为佳；原料中水分的存在不利于产物收率和质量，应控制水的质量分数在1％以下。本研究确定的较佳工艺条件为反应温度65℃，停留时间15min、苯酚／对－异丙烯基苯酚摩尔比20，对应的反应收率为98．5％。对双酚A副产物的处理提供了有效方法。     

Comparison of Three‐Dimensional Korean Male Anthropometric Data with Modeling Data Generated by Digital Human Models

The purpose of this study was first to extract the anthropometric data of typical Korean male adults, based on the three‐dimensional anthropometric data measured through the Size Korea project. The data were then analyzed to identify the differences in the anthropometric characteristics between typical Koreans and 3D Korean mannequinmannequins generated by digital human models. Revision equations were then suggested to improve the inaccuracy of digital human models. Typical Korean adults subject to the 3D body scan data were selected by factor analysis with respect to the 5th, 50th, and 95th percentiles. Comparisons of anthropometric differences included the differences of the height and length variables in the vertical direction and the breadth, depth, and circumference variables in the horizontal direction. These comparisons demonstrated the differences in the anthropometric characteristics between typical Koreans and Korean mannequins based on differences in body shape and proportions between Korean and Western populations. Typical Koreans have shorter legs and longer torso than those of such mannequins generated from their own modeling algorithms, and the body shape of Koreans is more of an inverted triangular shape compared to the models. Although 3D digital human models are required to be modified to appropriately reflect the Asian body shape, modification of the modeling algoritms is not available to the public. The revision equations that convert the Korean modeling data of RAMSIS and Human in CATIA into typical Korean anthropometric data were instead suggested by regression analysis. It is expected that the proposed revision equations will help the designer evaluate design alternatives and improve the suitability of ergonomic evaluation for Korean customers. © 2012 Wiley Periodicals, Inc.     

An analysis of muscles from ultrasound image using morphological information of fascia and thoracic vertebra

In this paper, we propose a new fully computerized image analysis method for measuring the thickness of muscles from ultrasound image obtained by muscle endurance test using morphological information of fascia and thoracic vertebra. Firstly, we divide the image into lumbar region and thoracolumbar region by the difference of density in image for measuring the thickness of muscles. In lumbar region, we notice that the intensity of fascia is relatively higher than other parts. Thus, we measure the thickness of muscles surrounding the fascia area. In the process, we apply median filter to candidate fascia areas for extracting candidate muscle layers between fascias. Then, the thickness of muscles we measure is that of the third layer. In thoracolumbar region, we apply region expansion method for classifying the region into subcutaneous fat part and part including thoracic vertebra. Then, we apply counting method and evolutionary computation search model to find the measuring location that is in between subcutaneous fat area and thoracic vertebra. In experiment, the proposed method is effective in measuring the thickness of muscles and avoids failures of previous studies. The performance of this approach is sufficiently comparable to that of medical experts.     

Digital evidence discovery of networked multimedia smart devices based on social networking activities

Unquestionably, networked multimedia smart devices are commonly adopted in contemporary ubiquitous wireless computing era with unprecedented evolving pace in terms of mobility, portability, and pervasiveness. Regrettably, those technology-oriented gadgets are phenomenally exploited by cyber criminals or get involved in computer-related incidents unknowingly. Substantively, the detection, prevention, and the related digital forensics of the above scenarios are becoming tremendously urgent both in public and private sectors. Therefore, in this research, we investigate the scenario when state-of-the-art wireless communication technologies are integrated with the networked smart devices where digital evidences may exist and they could be disclosed when appropriate standard operating procedures are suitably applied. Accordingly, in this paper, a PDA with the built-in GPS navigation functionality via the ubiquitous Wi-Fi connection to a popular social networking platform (facebook) is cross examined concerning the related digital evidence collecting and discovering in terms of revealing previous facebook user accounts on the mobile device without shutting off the power. The research provides a generic framework for the digital forensics specialists to contemplate when the networked smart devices are involved in the related criminal investigation cases especially when omnipresent social networking platforms are becoming the new avenue for the escalating, stringent, and heinous cybercrimes.     

Preparation of nano-sized silicon carbide powder using thermal plasma

Nano-sized silicon carbide (SiC) powder was prepared by thermal plasma process using silicon tetrachloride (SiCl₄) and methane (CH₄). The synthesized powder was characterized by X-ray diffraction pattern, scanning electron microscopy, transmission electron microscopy, FT-IR spectroscopy and particle size analyzer. The powder was dominated by β-SiC including some of α-SiC and free carbon species. The quality of the powder was varied with process conditions such as the molar ratio of H/Si and C/Si, and collecting positions. It was known that the conversion to SiC was mainly affected by the addition of hydrogen gas because it promoted the decomposition and reduction of SiCL. CH₄ was easily decomposed to carbon species for the formation of SiC as well as removal of impure oxygen, but excessive carbon suppressed the formation of crystalline SiC and resulted in the solid carbon contamination. The optimum ratio of H/Si was approx. 26 and that of C/Si was 1.1. For collecting positions, the powder collected at the vessel and filter was preferable to that at the reaction tube. The average size of the powder synthesized was estimated to be below 100 nm and uniform in distribution.     

木素及衍生物在油田上的应用

木素磺酸盐及改性物在三次采油过程中，具有降低石油磺酸盐等阴离子型活性剂在岩石表面上的吸附损失、乳化原油，与石油磺酸盐产生协同效应，降低油、水界面张力，提高残余油回收效率的性能。介绍了木素碘酸盐的改性方法与用途。应用木素磺酸盐及改性物进行三次采油，对于有效地开采水驱残余油，降低表面活性剂驱油成本具有重要意义。     

Changes in pore properties of phenol formaldehyde-based carbon with carbonization and oxidation conditions

Porous carbon beads were prepared by carbonizing at 700 and 1000 °C under N₂ (NN-series) or CO₂ atmospheres (CO-series) and a subsequent oxidization with boiling nitric acid solution (13%, v/v) for 3 h (ANN- and ACO-series). BET surface area of both CO- and NN-series samples tends to increase with increasing carbonization temperature, but CO-series samples show higher BET surface areas (700 °C: 610 m²/g, 1000 °C: 780 m²/g) compared with those of NN-series samples (700 °C: 380 m²/g, 1000 °C: 580 m²/g). After acid oxidation, BET surface areas of NN-series samples increased from 580 to 650 m²/g, whereas those of CO-series samples decreased from 780 to 600 m²/g. On subsequent acid oxidation, acidic surface functional groups increased in both CO- and NN-series samples, but the CO-series samples tend to have much more acidic surface functional groups. Adsorption of halogenated methanes, such as tetra-, tri- and dichloromethanes, onto the samples of CO-, NN-, ACO- and ANN-series was thought to be driven initially by the basicity, but the acidic functional groups that could attract adsorbates via dipole-dipole interaction might hinder the adsorption of subsequently incoming adsorbates.