Dissolution processes,hydrolysis and condensation reactions during geopolymer synthesis: Part I—Low Si/Al ratio systems

Initial geopolymeric reaction processes governing dissolution of solid aluminosilicate particles in alkali solutions have been investigated using conventional experimental techniques, and the data analysed by speciation predictions of the partial charge model (PCM). For metakaolin powders activated with 5.0 M NaOH, solid-state nuclear magnetic resonance (NMR) spectra disclose the existence of monomeric [Al(OH)₄]⁻ species after two hours of dissolution, consistent with PCM predictions. However, no equivalent monomeric silicate species were observed for 5.0–10.0 M NaOH activator solutions characteristic of systems with nominal Si/Al ≤ 1. The apparent absence of monomeric silicate species suggest rapid condensation of silicate units with [Al(OH)₄]⁻ to generate aluminosilicate species, as indicated by the evolution of the shoulder at around −87 ppm in the ²⁹Si NMR spectra. Of the two possible stable silicate species [SiO₂(OH)₂]²⁻ and [SiO(OH)₃]⁻, the latter appears most likely to condense with [Al(OH)₄]⁻ to produce aluminosilicate oligomers, from which larger oligomers subsequently form through further condensation with [Al(OH)₄]⁻ leading to a gradual build up of aluminosilicate networks and a lowering of system alkalinity. This dissolution and hydrolysis sequence at the early stages of synthesis suggests a reaction path wholly consistent with predictions of the partial charge model.     

广州中信商城地下连续墙施工工艺

本文介绍了广州中信商城地下连续墙的施工工艺。该工艺采用膨润土制浆配制方式，施工质量高，效果好。     

双积分A/D转换器的量程自动转换

介绍了一种双积分式A/D转换器在宽范围量程测量中的自动量程转换技术.在测量仪表的输入通道中,用计数器对双积分型A/D转换器本身所固有的过量程/欠量程信号计数,计数器的输出作为量程编码去控制量程的选择,同时又是送到CPU的量程指示信号.该技术扩大了A/D转换量程,提高了精度,设计简单,工作可靠.     

掺钛蓝宝石激光晶体中夹杂物的分析

本文用大视场光学显微镜、电子探针观察和分析了掺钛蓝宝石激光晶体中夹杂物的形状、尺寸大小及元素组成，并提出消除和减少这些夹杂物的方法．     

地震数据采集系统中频谱均衡滤波器的理论设计

地层的高频吸收衰减效应是导致地震勘探分辨率不高的主要原因，在高分辨率野外地震数据系统中，频谱均衡滤波器所设置的重要部件。文章以频谱均衡滤波器的原理和地层吸收衰减特性为基础，用计算机模拟的方法研究地层吸收衰减使分辨率降低的程度和频谱均衡滤波器对分辨率的补偿效果，给出了较好的频谱均衡滤波器的设计方案。     

辽河减压渣油中金属铁的赋存与分布特征

考察了辽河减渣在吸附分离、酸性溶液萃取和沥青质轻度降解过程中金属铁的分布和转移情况。结果表明，辽河减渣中有近90％的铁富集在胶质和沥青质中，部分铁以侧链较短的环烷酸盐或酚盐形式存在，部分铁连接在沥青质分子的侧链上，或是被包裹在沥青质大分子中。     

储罐中缓蚀剂的应用方法

缓蚀技术是减轻石油化学工业中各类油、气、水储罐内腐蚀的有效方法,但国内目前应用尚不普遍,原因之一是尚未找到较适宜的加入方法,使缓蚀剂的应用可以经济地和长时间地起作用,本文综述了储罐内缓蚀剂的各种应用技术,重点介绍在涂层中加缓蚀剂的技术,基于其溶解性或离子置换特性,在实际使用时缓蚀剂可持久、稳定地释放出来。这后一类技术可能是在储罐内应用缓蚀剂的最好方式之一。     

Pressure control for complete denture impressions

Pressures produced during a final impression have been discussed from the standpoint of where they should be applied and where they should be reduced. Areas of the edentulous mouth requiring little pressure are: the palate, residual ridges, and areas of easily displaced gingiva. More pressure is needed in the border seal, on the buccal shelf, and against the retromylohyoid fossa. A clear processed acrylic resin tray with escape holes has been shown to meet the requirements for selective pressure application. Zinc oxide paste is the final impression material of choice in most instances.