Influence of base material,tempered condition and hardening pattern on the residual stress profile of induction hardened gears

Forschung im Ingenieurwesen - This paper discusses influences of the base material, pre-heat treatment and hardening pattern on the residual stresses of induction hardened gears with module 2 and...     

Fluorine containing self‐crosslinking acrylic latexes with reduced flammability and their application as polymer binders for heterogeneous cation‐exchange membranes

In this study, self‐crosslinking core–shell latexes comprising copolymerized perfluorethyl groups and a novel flame retardant based on phosphazene derivative were prepared by the semi‐continuous non‐seeded emulsion polymerization of 2,2,2‐trifluorethyl methacrylate, methyl methacrylate, butyl acrylate, methacrylic acid, and hexaallylamino‐cyclo‐triphosphazene as main monomers. For interfacial crosslinking, diacetone acrylamide was copolymerized into the shell layer of latex particles to provide sites for subsequent reaction with adipic acid dihydrazide. The heterogeneous cation‐exchange membranes were obtained by dispersing commercial strong acid cation‐exchange resin powder in the latex binder and casting the mixture followed by keto‐hydrazide crosslinking reaction. It was found that the increased concentration of fluorine atoms and phosphazene units in the macromolecular structure of interfacially crosslinked emulsion polymers resulted in a significant enhancement of their flame resistance and shape stability in aqueous environment. Moreover, the easily prepared heterogeneous cation‐exchange membranes based on latexes with higher amounts of fluorine and phosphazene units were shown to exhibit satisfactory physicochemical and electrochemical properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45467.     

Prediction of Speech Quality Based on Resilient Backpropagation Artificial Neural Network

The paper presents a system for monitoring and assessment the speech quality in the IP telephony infrastructures using modular probes. The probes are placed at key nodes in the network where aggregating packet loss data. The system dynamically measures speech quality and results are collected on a central server. For data analysis we applied four-state Markov model for modeling the impact of network impairments on speech quality, afterwards, the resilient back propagation (Rprop) algorithm was used to train a neural network. Information about the speech quality are displayed in the form of automatically generated graphs and tables. The proposed solution has been tested with selected codecs and further generalizes the already presented concepts of the speech quality estimation in the IP environment.

     

Problem of the reference height of the projectile trajectory as a reduced meteo-ballistic weighting factor

This paper deals with the issue of preparation of the aiming angles with the use of tabular firing tables and needed determination of the ballistic elements μB （ballistic wind wB Wxm WzB, ballistic （virtual） temperature τB, ballistic density ρB） from the standardized met messages. The weighting factors are used for the calculation of ballistic elementsμB that are incorporated into the trajectory calculations characteristics of weapon and ammunition. Two different methodologies practically used in the praxis are analysed and compared. For the comparison of the two methodologies the reference height of trajectory determined from the weighting factor functions is employed. On the basis of the analyses conducted, the potential for further increase in accuracy of these aiming angles preparation methods is pointed out.     

Untersuchung der thermisch‐hygrischen Eigenschaften von Ziegeln mit Hohlraumfüllung aus Recyclingmaterial

Investigation on the thermal‐hygral behaniour of bricks with canity filling by recycling meterials. In the investigation project was examined whether bricks with simple cavity structure have a higher heat resistance by use of a heat insulation material filling in the cavities. The insulation material is a recycled product made of polystyrene and wood covered and bonded with cement. The influence of the configuration and thickness of the perforated bricks with vertical perforations and the geometry of the cavities of the brick on the thermal moisture states was evaluated. For investigation of the thermal resistance and the heat transmission coefficients were used the simulation program THERM, that considered the heat transportation through conduction in the brick fragments and the transport mechanisms conduction, convection and radiation in the airfilled cavities. The software package WUFI 2D was employed for the investigation of moisture transfer in the bricks. The investigations showed that the composite brick insulation stone has a thermal resistance twice as high as the initial brick. The moisture states can be partially in the brick more than 80 % humidity. This load is estimated as uncritical because the wooden particles are covered with cement slime.     

Surface functionalization of mesoporous antimony doped tin oxide by metalorganic reaction

Electrically conducting mesoporous antimony doped tin oxide was functionalized by the metalorganic reaction with several Grignard reagents. This fast and efficient grafting approach enables a direct connection of the metal atoms with the organic functionalities avoiding the formation of insulating Si–O linkers, which is of special interest for the interfacial charge transfer processes. Using this approach we introduced vinyl, allyl and phenyl groups into the pores of mesoporous ATO, which was confirmed by IR spectroscopy, TGA and nitrogen sorption measurements. We obtained a high loading of organic groups corresponding to about 50–60% of the monolayer surface coverage. The obtained mesoporous inorganic–organic hybrids can serve as a platform for incorporation of electrochemically active species.     

3GPP LTE‐Assisted Wi‐Fi‐Direct: Trial Implementation of Live D2D Technology

This paper is a first‐hand summary on our comprehensive live trial of cellular‐assisted device‐to‐device (D2D) communications currently being ratified by the standards community for next‐generation mobile broadband networks. In our test implementation, we employ a full‐featured 3GPP LTE network deployment and augment it with all necessary support to provide real‐time D2D connectivity over emerging Wi‐Fi‐Direct (WFD) technology. As a result, our LTE‐assisted WFD D2D system enjoys the required flexibility while meeting the existing standards in every feasible detail. Further, this paper provides an account on the extensive measurement campaign conducted with our implementation. The resulting real‐world measurements from this campaign quantify the numerical effects of D2D functionality on the resultant system performance. Consequently, they shed light on the general applicability of LTE‐assisted WFD solutions and associated operational ranges.     

Structure and morphology of linear polyethylene extrudates induced by elongational flow

This study focuses on the structure, morphology, and properties of linear polyethylene (PE) profiles manufactured by continuous extrusion. High level of chain orientation was achieved using specific flow and processing conditions. An extrusion die with semihyperbolic convergency was used to generate high percentage of elongational flow and chain extension. Simultaneously, high extrusion pressure and relatively low melt temperature led to flow‐induced crystallization of PE extended chains. The structure of PE tapes consists of crystal aggregates with different level of orientation and crystallinity. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Eucalyptol is an Attractant of the Redbay Ambrosia Beetle,Xyleborus Glabratus

The redbay ambrosia beetle, Xyleborus glabratus, is an invasive wood-boring beetle that has become established in the southeastern United States. The beetle transmits the causal pathogen of lethal laurel wilt to susceptible host trees, which include redbay, an important forest community species, and avocado, a valuable food crop. By examining odors of redbay wood, we developed an artificial lure that captured X. glabratus in redbay forests. Eucalyptol was a critical component of the blend for beetle attraction, and eucalyptol alone in large quantities attracted X. glabratus. Furthermore, eucalyptol stimulated boring by X. glabratus into paper arenas. The results suggest that eucalyptol contributes to host selection behavior of X. glabratus and may be useful for management of this pathogen vector.