Influence of drying conditions on colour,betacyanin content and antioxidant capacities in dried red-fleshed dragon fruit (Hylocereus polyrhizus)

In this study, drying of red-fleshed dragon fruit at different temperatures (40, 50, 60, 70 and 80 °C) and air velocities (1.0 and 1.5 m s⁻¹) was conducted under the specific humidity of 25 g H₂O kg⁻¹ dry air. The results showed that drying at higher temperatures resulted in shorter drying times. However, temperature and air velocity did not significantly affect the total betacyanin contents and antioxidant capacities in dried products. Seven betacyanins identified by LC-MS were betanin, isobetanin, phyllocactin, isophyllocactin, betanidin 5 –O-(6′O-3-hydroxybutyryl)-β-glucoside, isobetanidin 5 –O-(6′O-3-hydroxybutyryl)-β-glucoside and decarboxylated phyllocactin. In addition, the temperature increased the isomerisation of betacyanins. The most preferable condition for preserving the colour and betacyanin contents of red-fleshed dragon fruit was the drying at a temperature of 80 °C and air velocity of 1.5 m s⁻¹ since it could shorten the drying time and give a bright red colour to the dried product as well as it had no significant impact on the betacyanins.     

[2.2]Paracyclophane-Based TCN-201 Analogs as GluN2A-Selective NMDA Receptor Antagonists

Recent studies have shown the involvement of GluN2A subunit-containing NMDA receptors in various neurological and pathological disorders. In the X-ray crystal structure, TCN-201 ( 1 ) and analogous pyrazine derivatives 2 and 3 adopt a U-shape (hairpin) conformation within the binding site formed by the ligand binding domains of the GluN1 and GluN2A subunits. In order to mimic the resulting π/π-interactions of two aromatic rings in the binding site, a [2.2]paracyclophane system was designed to lock these aromatic rings in a parallel orientation. Acylation of [2.2]paracyclophane ( 5 ) with oxalyl chloride and chloroacetyl chloride and subsequent transformations led to the oxalamide 7 , triazole 10 and benzamides 12 . The GluN2A inhibitory activities of the paracyclophane derivatives were tested with two-electrode voltage clamp electrophysiology using Xenopus laevis oocytes expressing selectively functional NMDA receptors with GluN2A subunit. The o-iodobenzamide 12 b with the highest similarity to TCN-201 showed the highest GuN2A inhibitory activity of this series of compounds. At a concentration of 10 μM, 12 b reached 36 % of the inhibitory activity of TCN-201 ( 1 ). This result indicates that the [2.2]paracyclophane system is well accepted by the TCN-201 binding site.     

Thermal and Electrical Conductivity of Amorphous and Graphitized Carbide‐Derived Carbon Monoliths

The influence of graphitization and composition of carbide‐derived carbon (CDC) monoliths on the electrical and thermal conductivity was investigated. Carbon monoliths with varying porosities were synthesized employing biomorphous macroporous TiC and SiC as precursors. Graphitization was carried out in situ during high‐temperature chlorination with and without addition of nickel, iron, and cobalt chloride to the carbide. The graphitized monoliths showed improved properties. The results demonstrate that despite graphitic carbon also glass‐like carbon, stemming from the carbide synthesis, increases the thermal and electrical conductivity significantly.     

Post‐protection effect of heat‐resistant insulations on timber‐frame members exposed to fire

In lightweight walls and floors, the load‐bearing timber members are protected by cladding on the sides to form a divider between two fire compartments or to provide appropriate fire protection to the load‐bearing members. The spaces between the timber members can be void or filled with insulation materials. Although a huge number of different insulation materials exist, the most commonly used material is mineral wool insulation. The existing design model for glass wool‐insulated timber‐frame constructions, given in European standard 1995‐1‐2, assumes collapse of the glass wool after failure of the cladding. However, a new form of glass wool insulation, suitable for use at high maximum service temperatures, is now available in the market. The charring phase after the cladding's failure is known as the post‐protection phase. The behaviour of the new heat‐resistant glass wool in the post‐protection phase is similar to that of stone wool and considerably better than that of traditional glass wool. The protective properties of stone wool have changed over the last decades. Charring is one of the main parameters needed to calculate the resistance of a structure to fire. Based on experimental investigations, this paper describes the analysis of the effect of the insulation with regard to its ability to protect timber members against charring during the post‐protection phase. Copyright © 2011 John Wiley & Sons, Ltd.     

Electrical properties of dielectric foil for embedded PCB capacitors

One of the methods of achieving high packaging density of passive elements on the PCB is using the capacitors embedded in multilayer PCB. Test structures consisting of embedded capacitors were fabricated using the FaradFlex? capacitive internal layers. Impedance spectroscopy and equivalent circuit modelling was used to determine their electrical properties such as the capacitance, parasitic resistance and inductance. The use of several stages of accelerated ageing allowed us to test the durability of the structures. The results showed good quality stability of the embedded elements. The spatial distribution of the capacitance of the test structures on the surface of the PCB form was tested. The influence of the process parameters during lamination on the values of embedded capacitors was revealed.     

Ein Konzept zur Wirkungsgradoptimierung von Einzylinder-Dieselgeneratoren mittels Optimalsteuerung und Extremum-Seeking

In this contribution the problem of maximizing the efficiency of a hybrid power unit at a specified output power level by optimizing the generator current trajectory as well as the design variables that can be chosen during the machine design process is investigated. The concept is demonstrated based on a hybrid single-cylinder diesel engine that is coupled to an electric generator. By developing a model of the system and using open-loop optimal control the optimal operating strategy and the optimal machine design are determined. Besides that, the problems occurring in the application of this strategy to a test rig are discussed. For this purpose, a model-free real-time optimization concept based on extremum seeking control is presented. The effectiveness of both the model-based and the model-free concept are demonstrated by simulation and experimental results.