A web-based platform for the simulation–optimization of industrial problems

This study presents a platform for industrial, real-world simulation–optimization based on web techniques. The design of the platform is intended to be generic and thereby make it possible to apply the platform in various problem domains. In the implementation of the platform, modern web techniques, such as Ajax, JavaScript, GWT, and ProtoBuf, are used. The platform is tested and evaluated on a real industrial problem of production optimization at Volvo Aero Corporation, a company that develops and manufactures high-technology components for aircraft and gas turbine engines. The results of the evaluation show that while the platform has several benefits, implementing a web-based system is not completely straightforward. At the end of the paper, possible pitfalls are discussed and some recommendations for future implementations are outlined.     

Physical and electrochemical properties of cobalt doped (Ti,Ru)O2 electrode coatings

The physical and electrochemical properties of ternary oxides Ti_0.7Ru_0.3−xCo_xO₂ (x = 0.093 and x = 0) have been investigated and compared. Samples of three different thicknesses were prepared by spin-coating onto polished titanium to achieve uniform and well-defined coatings. The resulting electrodes were characterized with a variety of methods, including both physical and electrochemical methods. Doping with cobalt led to a larger number of micrometer-sized cracks in the coating, and coating grains half the size compared to the undoped samples (10 instead of 20 nm across). This is in agreement with a voltammetric charge twice as high, as estimated from cyclic voltammetry. There is no evidence of a Co₃O₄ spinel phase, suggesting that the cobalt is mainly incorporated in the overall rutile structure of the (Ti,Ru)O₂. The doped electrodes exhibited a higher activity for cathodic hydrogen evolution compared to the undoped electrodes, despite the fact that one third of the active ruthenium was substituted with cobalt. For anodic chlorine evolution, the activity was similar for both electrode types.     

Pulse contour-derived cardiac output in hemodialysis patients

Reliable methods for cardiac output determination are essential for studying the pathophysiology of intradialytic hypotension. Use of the current gold standard, the Transonic^® monitor, requires an arteriovenous fistula. We wished to verify the accuracy of a method based on finger pulse contour analysis, namely the Finometer^® monitor (FNM) for further use on patients dialyzing on a central vascular catheter. Fifty simultaneous cardiac output measurements were obtained during hemodialysis sessions in 25 patients. The internal variability of the FNM measurements was assessed by comparing 24 pairs of immediately successive measurements. The variability of successive FNM measurements was small (bias 0.28%, SD ± 6.1%; NS). The absolute cardiac output values reported by the FNM were unreliable (bias 20.1%, SD ± 35.3%; P<0.001) as were the relative intradialytic changes (r²=0.01). Excluding participants from the analysis due to old age, high dialysis vintage or a suspicion of atherosclerosis did not improve the results. Our findings do not support the use of pulse contour analysis for measuring cardiac output in hemodialysis patients. Uremic vascular disease may be the cause of the observed inaccuracy.     

A computationally convenient unit root test with covariates,conditional heteroskedasticity and efficient detrending

When testing for a unit root in a time series, in spite of the well‐known power problem of univariate tests, it is quite common to use only the information regarding the autoregressive behaviour contained in that series. In a series of influential papers, Elliott et al. (Efficient tests for an autoregressive unit root, Econometrica 64, 813–836, 1996), Hansen (Rethinking the univariate approach to unit root testing: using covariates to increase power, Econometric Theory 11, 1148–1171, 1995a) and Seo (Distribution theory for unit root tests with conditional heteroskedasticity, Journal of Econometrics 91, 113–144, 1999) showed that this practice can be rather costly and that the inclusion of the extraneous information contained in the near‐integratedness of many economic variables, their heteroskedasticity and their correlation with other covariates can lead to substantial power gains. In this article, we show how these information sets can be combined into a single unit root test.     

Quasi-static behaviour of composite joints with protruding-head bolts

An experimental study of the quasi-static behaviour of composite bolted joints under tensile and compressive loading has been performed. The joint plates made of quasi-isotropic and 0°-dominated lay-ups were fastened by two, four, or six titanium bolts. Two specimen configurations were tested: single lap and double lap. Strain gauges were applied in order to measure strain between the bolt rows and to calculate the load transfer of the bolt rows. Bolt-movement measurements were performed using extensometers to examine bolt behaviour under static loading. The obtained experimental results showed that bolted joints with four and six bolts perform better resistance to quasi-static loading than joints with two bolts. Strain distribution between two bolts is significantly affected by the bolt presence and their behaviour under loading. The load-transfer calculations showed that different bolt rows transfer slightly different amounts of load.     

Chemical composition and mass emission factors of candle smoke particles

The aim of this study is to investigate the physical and chemical properties of particle emissions from candle burning in indoor air. Two representative types of tapered candles were studied during steady burn, sooting burn and smouldering (upon extinction) under controlled conditions in a walk-in stainless steel chamber. Steady burn emits relatively high number emissions of ultrafine particles dominated by either phosphates or alkali nitrates. The likely source of these particles is flame retardant additives to the wick. Sooting burn in addition emits larger particles mainly consisting of agglomerated elemental carbon. This burning mode is associated with the highest mass emission factors. Particles emitted during smouldering upon extinction are dominated by organic matter. A mass closure was illustrated for the total mass concentration, the summed mass concentration from chemical analysis and the size-integrated mass concentration assessed from number distribution measurements using empirically determined effective densities for the three particle types.     

Wheat gluten fractions as wood adhesives—glutenins versus gliadins

Plant proteins, such as wheat gluten, constitute attractive raw materials for sustainable wood adhesives. In this study, alkaline water dispersions of the protein classes of wheat gluten, glutenin, and gliadin were used as adhesives to bond together wood substrates of beech. The aim of the study is to measure the tensile shear strength of the wood substrates to compare the adhesive performance of glutenin and gliadin and to investigate the influence of application method and penetration of the dispersions into the wood material. A sodium hydroxide solution (0.1M) was used as dispersing and denaturing agent. Dispersions with different protein concentrations and viscosities were used, employing wheat gluten dispersions as references. Two different application methods, a press temperature of 110°C and a press time of 15 min, were employed. The tensile shear strength and water resistance of the wood substrates were compared, using a slightly modified version of the European Standard EN 204. The bond lines of the substrates were examined by optical microscopy to study the penetration and bond‐line thickness. The results reveal that the adhesive properties of gliadin are inferior to that of both glutenin and wheat gluten, especially in terms of water resistance. However, the tensile shear strength and the water resistance of gliadin are significantly improved when over‐penetration of the protein into the wood material is avoided, rendering the adhesive performance of gliadin equal to that of glutenin and wheat gluten. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Supporting group collaboration with interpersonal awareness devices

An Interpersonal Awareness Device, or IPAD, is a hand-held or wearable device designed to support awareness and collaboration between people who are in the physical vicinity of each other. An IPAD is designed to supply constant awareness information to users in any location without relying on an underlying infrastructure. We have constructed one such device, the Hummingbird, which gives members of a group continuous aural and visual indications when other group members are close. We have used the Hummingbirds in several different situations to explore how they affect group awareness. These experiences indicated that the Hummingbird increased awareness between group members, and that it could complement other forms of communication, such as phone and email. In particular, we found the Hummingbird to be useful when a group of people were in an unfamiliar location, for instance during a trip, where no other communication support was available. We argue that IPADs such as the Hummingbird may fulfil important functions in modern work situations.