Physical and chemical properties and adsorption type of activated carbon prepared from plum kernels by NaOH activation

Activated carbon was prepared from plum kernels by NaOH activation at six different NaOH/char ratios. The physical properties including the BET surface area, the total pore volume, the micropore ratio, the pore diameter, the burn-off, and the scanning electron microscope (SEM) observation as well as the chemical properties, namely elemental analysis and temperature programmed desorption (TPD), were measured. The results revealed a two-stage activation process: stage 1 activated carbons were obtained at NaOH/char ratios of 0-1, surface pyrolysis being the main reaction; stage 2 activated carbons were obtained at NaOH/char ratios of 2-4, etching and swelling being the main reactions. The physical properties of stage 2 activated carbons were similar, and specific area was from 1478 to 1887m(2)g(-1). The results of reaction mechanism of NaOH activation revealed that it was apparently because of the loss ratio of elements C, H, and O in the activated carbon, and the variations in the surface functional groups and the physical properties. The adsorption of the above activated carbons on phenol and three kinds of dyes (MB, BB1, and AB74) were used for an isotherm equilibrium adsorption study. The data fitted the Langmuir isotherm equation. Various kinds of adsorbents showed different adsorption types; separation factor (R(L)) was used to determine the level of favorability of the adsorption type. In this work, activated carbons prepared by NaOH activation were evaluated in terms of their physical properties, chemical properties, and adsorption type; and activated carbon PKN2 was found to have most application potential.     

Regulation of cardiac myocyte contractile function by inducible nitric oxide synthase (iNOS): mechanisms of contractile depression by nitric oxide

Inflammatory cytokines have been implicated in the reversible depression of cardiac contractile function accompanying local or systemic immune stimulation. Incubation of cardiac myocytes with soluble components in the supernatant from cultured rat lung macrophages activated with endotoxin decreases their contractile response to beta-adrenergic stimulation through the induction of iNOS and the subsequent production of nitric oxide by these cells. In the present study, we characterize the mechanisms underlying NO's attenuation of adrenergic responsiveness in cardiac myocytes. iNOS was induced in cultured ventricular myocytes from adult rats by incubation for 20 h with conditioned medium from lipopolysaccharide (LPS)-activated macrophages. iNOS induction did not induce any alteration in beta-adrenergic receptor density or affinity, Galphai protein abundance, or adenylyl cyclase activity in cultured myocytes. Myocyte exposure to activated macrophage-conditioned medium markedly attenuated the elevation of cAMP in response to isoproterenol (Iso, 2 nM). Induction of iNOS with the macrophage-conditioned medium also potentiated the Iso-induced increase in myocyte cGMP. This cGMP increase was totally abolished by NOS inhibitors. NOS inhibition also returned the attenuated cAMP response to 2 nM Iso to levels observed in control cells. Pre-incubation of the cells in isobutylmethylxanthine (IBMX), a phosphodiesterase inhibitor, also partly reversed the attenuation of cAMP increase with 2 nM Iso in cells expressing iNOS. Brief (15 min) exposure of myocytes to the NO donor, S-nitrosoacetylcysteine (SNAC, 100 micro M) which produced a three-fold increase in intracellular cGMP, also decreased by half the contractile response of cardiac myocytes to Iso (2 nM). We conclude that NO endogenously produced by iNOS decreases the intracellular levels of cAMP in response to beta-adrenergic stimulation in isolated cardiac myocytes, in part through a cGMP-mediated mechanism. This effect may participate in the NO-dependent depression of cardiac function following cytokine exposure.     

Sparking Nano-Metals on a Surface of Polyethylene Terephthalate and Its Application: Anti-Coronavirus and Anti-Fogging Properties

The nano-metal-treated PET films with anti-virus and anti-fogging ability were developed using sparking nano-metal particles of Ag, Zn, and Ti wires on polyethylene terephthalate (PET) films. Ag nanoparticles were detected on the PET surface, while a continuous aggregate morphology was observed with Zn and Ti sparking. The color of the Ag-PET films changed to brown with increasing repeat sparking times, but not with the Zn-PET and Ti-PET films. The water contact angle of the nano-metal-treated PET films decreased with increasing repeat sparking times. The RT-PCR anti-virus test confirmed the high anti-virus efficiency of the nano-metal-treated PET films due to the fine particle distribution, high polarity, and binding of the nano-metal ions to the coronavirus, which was destroyed by heat after UV irradiation. A highly transparent, anti-fogging, and anti-virus face shield was prepared using the Zn-PET film. Sparking was an effective technique to prepare the alternative anti-virus and anti-fogging films for medical biomaterial applications because of their low cost, convenience, and fast processing.     

Resistance projection welding for TO-Can style package

The effects of the process parameters on the joint quality of TO-Can using resistance projection welding were investigated.A capacitor discharge stored energy welding machine was used for joining caps and headers both coated with nickel SPCC steel.The electrode materials used in this study were brass and W-Cu alloy.Experimen-tal results indicated that the peak current of the W-Cu electrode was higher than that of the brass electrode,irrespective of the operating pressure variation.Increased operating pressu...     

Microstructure and Densification of Pressureless-Sintered Al2O3/Si3N4-Whisker Composites

Composite densification was studied by performing slip casting and sintering experiments on an Al₂O₃ matrix and Si₃N₄ whisker system. Even though all the slip-cast powder compacts exhibited high green densities (up to 70% of the theoretical) and narrow pore-size distribution (pore radius around 15 to 30 nm), significant differential densification on a microscopic scale was found due to the existence of local whisker agglomeration. The inhomogeneous whisker distribution resulted in a binary mixture of large and small pores in the sintered composites, in which whisker-associated flaws remained stable even after prolonged sintering. The sintered microstructures showed that the spatial distribution as well as the volume fraction of the Si₃N₄ affect composite densification. Inhomogeneous whisker distribution dominated the complete densification of the composites.     

Study of SO2 adsorption and thermal regeneration over activated carbon-supported copper oxide catalysts

The mechanisms of SO₂ adsorption and regeneration over activated carbon-supported copper oxide sorbent/catalysts were analyzed. Studies were carried out in a fixed-bed reactor equipped with a non-dispersive infrared gas analyzer to detect the reaction products and by using X-ray powder diffraction (XRPD) and temperature-programmed desorption (TPD) experiments to characterize the nature of the sulfate species and surface oxygen complexes. The results indicate that SO₂ was catalytically oxidized to SO₃ over a copper phase in the presence of gaseous oxygen, and then reacted with a copper site to form a sulfate linked to copper without desorption into the gas phase. The activated carbon support did not participate in this sulfation reaction. After the adsorption of SO₂, the exhausted sorbent/catalysts could be regenerated by direct heat treatment in inert gas at temperatures between 260 and 480 °C, while the neighboring surface oxygen complexes on the carbon surface were acting as the reducing agents to reduce CuSO₄ to Cu. During the subsequent adsorption process, the copper is rapidly oxidized by oxygen in the flue gas.     

Time-dependent viscosity of structured clay suspensions

Time-dependent viscosity of structured clay suspensions under a fixed shear was revealed in the prepared slurry samples of clay lenses from the Athabasca oil sands deposit, differing from thixotropic or rheopectic suspensions. At a lower salt (Na or Ca) concentration, the viscosity oscillated with time, which was slowly damped with increasing salt concentrations. The viscosity increased without reaching a maximum plateau, even after a run of a few hours. At 1000 ppm Na concentration, a maximum viscosity was reached, followed by viscosity fluctuation within a narrow range to approach an equilibrium value with time. Both sample ageing and shear history affected the slurry viscosity. It was speculated that the Brownian motion of colloidal clay particles and the applied shear induced rearrangement and continued formation of clay microstructures with time, due to the rotation of anisotropic colloidal clay particles under simple shear flow. Its implications to oil sands research and operation were briefly discussed.     

Sensitiveness of Porous Silicon‐Based Nano‐Energetic Films

Nanoporous silicon (pSi) films on a silicon wafer were loaded with sodium perchlorate and perfluoropolyether (PFPE) oxidizing agents. Sensitiveness to impact, friction and electrostatic discharge (ESD) of the resulting energetic thin films were investigated. It was observed that pSi loaded with perchlorate was sensitive at the lowest limit of detection for the available equipment (<4.9 J impact energy, <5 N friction force, and <45 mJ ESD spark energy). When loaded with PFPE the material was very sensitive to impact (<4.9 J), moderately sensitive to ESD (between 45 and 100 mJ) and insensitive to friction (>360 N). pSi loaded with either perchlorate or PFPE displayed behavior during sensitiveness testing similar to other primary explosive materials.     

The Effect of Silver Chloride Formation on the Kinetics of Silver Dissolution in Chloride Solution

The precipitation and growth of AgCl on silver in physiological NaCl solution were investigated. AgCl was found to form at bottom of scratches on the surface which may be the less effective sites for diffusion or the favorable sites for heterogeneous nucleation. Patches of silver chloride expanded laterally on the substrate until a continuous film formed. The ionic transport path through this newly formed continuous film was via spaces between AgCl patches. As the film grew, the spaces between AgCl patches closed and ion transport was primarily via micro-channels running through AgCl patches. The decrease of AgCl layer conductivity during film growth were attributed to the clogging of micro-channels or decrease in charge carrier concentration inside the micro-channels. Under thin AgCl layer, i.e. on the order of a micrometer, the dissolution of silver substrate was under mixed activation-Ohmic control. Under thick AgCl layer, i.e. on the order of tens of micrometers, the dissolution of silver substrate was mediated by the Ohmic resistance of AgCl layer.     

Effect of silanes on the morphology,hydrophobicity, and dynamical mechanical properties of polyimide/silica hybrid membranes

Polyimide (PI)/silica hybrid membranes with high contact angles were prepared through the in situ sol–gel process. The precursor, poly(amic acid) with controlled block chain length, was synthesized using 4,4′‐diaminodiphenyl ether (ODA), 3,3′,4,4′‐benzophenone‐tetracarboxylic dianhydride (BTDA) and 3‐aminopropyl‐trimethoxysilane (APrTMOS) or 3‐aminopropyldimethylethoxysilane (APDiMOS). And then, phenyltrimethoxysilane (PTS) or tetramethoxysilane (TMOS) or methyltrimethoxysilane (MTrMOS) was respectively, added to the above polyamic acid and mixed thoroughly. Following curing reaction, the PI/silica hybrid membranes with different cross‐linkages, silica content, and hydrophobic properties were prepared. The effect on the formation of PI imide ring during imidization reaction is increased as the increase of silanes content and characterized by frequency shiftment and absorbance ratio of Fourier transform infrared (FTIR) measurements. All the hybrid membranes show high transparency though with high silica contents. The storage modulus, tan δ, and damping intensity by DMA measurements are all correlated with silane content or block chain length. And all these membranes with silane content possess high contact angle as compared to pure PI without any silanes added and the contact angles increase with increasing the silane content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011