A Highly Active and Selective Manganese Oxide Promoted Cobalt-on-Silica Fischer�CTropsch Catalyst

A highly active and selective manganese oxide-promoted silica-supported cobalt catalyst for the Fischer?CTropsch reaction is reported. Co/MnO/SiO₂ catalysts were prepared via impregnation of a cobalt nitrate and manganese nitrate precursor, followed by drying and calcination in an NO/He flow. The catalysts were studied with STEM?CEELS, infrared spectroscopy measurements of adsorbed CO and Steady-State Isotopic Transient Kinetic Analysis experiments. Based on those experiments, a relation between C₅₊-selectivity and surface-coverages of CH _x -intermediates on cobalt was found.     

Impedance study of the ion-to-electron transduction process for carbon cloth as solid-contact material in potentiometric ion sensors

Carbon cloth was studied as solid-contact material in potentiometric ion sensors by using electrochemical impedance spectroscopy and potentiometry. The ion-to-electron transduction process was studied by electrochemical impedance spectroscopy by using a two-electrode symmetrical cell where a liquid electrolyte was sandwiched between two solid electrodes, including bare glassy carbon (GC), GC/carbon cloth and GC/poly(3,4-ethylenedioxythiophene). Impedance data for different electrode/electrolyte combinations were evaluated and compared. Solid-contact K⁺-selective electrodes were fabricated by coating the carbon cloth with a conventional plasticized PVC-based K⁺-selective membrane via drop casting. These K⁺-sensors showed proper analytical performance and acceptable long-term potential stability (potential drift ≈ 1 mV/day). Solid contact reference electrodes were fabricated in an analogous manner by coating the carbon cloth with a plasticized PVC membrane containing a moderately lipophilic salt. The results indicate that carbon cloth can be used as a solid-contact material in potentiometric ion sensors and pseudo-reference electrodes.     

Application of ultrasound for start‐up of evaporative batch crystallization of ammonium sulfate in a 75‐L crystallizer

A positive effect of ultrasound on crystallization has been shown for many applications especially on small scale. Predictable scale‐up of sonocrystallization is a challenge due to the inherent dependency of ultrasound on scale. The presented research discusses the experimental application of ultrasound to induce nucleation at low supersaturation for start‐up of evaporative batch‐wise crystallization of ammonium sulfate in a 75‐L draft tube (DT) crystallizer. A comparison is made with a conventional start‐up procedure using primary nucleation or seeding. Ultrasound is applied in two geometrically different vessels of 1.2‐L connected to a 75‐L DT crystallizer. Application of ultrasound for start‐up of a 75‐L DT crystallizer shows that an optimum amount of ground seeds is better capable to suppress nucleation. A challenge for future research is to improve the efficiency of ultrasound to produce a large number of nuclei for start‐up of batch crystallization at larger scale. © 2011 American Institute of Chemical Engineers AIChE J, 2011     

PEPT study of particle cycle and residence time distributions in a Wurster fluid bed

Particle cycle and residence time distributions are critical factors in determining the coating quality in the Wurster process. Positron emission particle tracking experiments are performed to determine the cycle and residence times of particles in different regions of a Wurster fluid bed. The results show that particles tend to recirculate in and sneak out below from the Wurster tube. The experiments also show that a larger batch size leads to a shorter cycle time and a narrower cycle time distribution (CTD). It is possible to avoid recirculations and obtain a shorter cycle time and a narrower CTD by selecting the operating conditions appropriately or via equipment design. Experiments using binary mixtures of particles with a diameter ratio of 1.5 show that large particles have a longer cycle time than small particles and that the cycle time is shorter for mixtures with approximately equal amounts of small and large particles. © 2014 American Institute of Chemical Engineers AIChE J, 61: 756–768, 2015     

Separation of L‐aspartic acid and L‐glutamic acid mixtures for use in the production of bio‐based chemicals

BACKGROUND: Amino acids are promising feedstocks for the chemical industry due to their chemical functionality. They can be obtained by the hydrolysis of potentially inexpensive protein streams such as the byproduct of biofuel production. However, individual amino acids are required before they can be used for the further production of chemicals. Here, the separation of L‐aspartic acid (Asp) and L‐glutamic acid (Glu) mixture, which can be isolated from protein hydrolysis solutions at low pH or from electrodialysis of complex amino acid mixtures, was studied. RESULTS: Glu was converted into L‐pyroglutamic acid (pGlu) which can be separated from the mixture of Asp and Glu due to its higher solubility in water. The conversion was carried out under aqueous or melt conditions. Under aqueous conditions, the conversion was studied as a factor of time, temperature and the amount of Glu. The conversion was specific with high yield and not effected by Asp. After pGlu was separated from Asp and residual Glu by solubility difference, it can be transferred back to Glu through hydrolysis. CONCLUSION: The conversion of Glu to pGlu is specific and can be applied to separation Asp and Glu for their use in the production of bio‐based chemicals. Copyright © 2012 Society of Chemical Industry     

Fluidization of spherical versus elongated particles: Experimental investigation using magnetic particle tracking

In biomass processing fluidized beds are used to process granular materials where particles typically possess elongated shapes. However, for simplicity, in computer simulations particles are often considered spherical, even though elongated particles experience more complex particle– particle interactions as well as different hydrodynamic forces. The exact effect of these more complex interactions in dense fluidized suspensions is still not well understood. In this study we use the magnetic particle tracking technique to compare the fluidization behavior of spherical particles to that of elongated particles. We found a considerable difference between fluidization behavior of spherical versus elongated particles in the time-averaged particle velocity field as well as in the time-averaged particle rotational velocity profile. Moreover, we studied the effect of fluid velocity and the particle's aspect ratio on the particle's preferred orientation in different parts of the bed, which provides new insight in the fluidization behavior of elongated particles.     

Protein Shift – How Membrane Technology Can Contribute

Proteins are not only important for our daily diet but also one of the most important food ingredients worldwide. Since the 1970ies membrane processes have established themselves as a key unit operation in protein processing, e.g., in the dairy industry. The recent trend of the protein shift moving consumption of animal-based to plant-based proteins provides new applications for membrane processes. Thus, in this work, the opportunities to transfer the membrane processing experiences from animal-based proteins to plant-based protein products will be the focus.     

伊朗轻质原油减渣馏分油水界面张力的研究

The vacuum residual from Iranian Light crude oil are separated into a series of 16 narrow fractions according to the molecular weight by the supercritical fluid extraction and fractional (SFEF) technology. The chemical element and the UV spectrum of each fraction are analyzed. The effects of several factors on the interfacial tension are investigated, which are the fraction concentration in oil phase, the ratio of oil component, the salts dissolved in the water phase and the pH value. The interfacial tension decreases rapidly as the concentration of the residual fraction in the oil increases, showing a higher interfacial activity of the fraction. The interfacial tension changes, as the amount of absorption or the state of the fractions in the interface changes resulting from different ratios of oil, different kinds or concentrations of salts in water, and different pH values. It is concluded that the intrfacial tension changes regularly, corresponding to the regular molecular parameters of the vacuum residual fractions.