Surface damage during machining of annealed 18% nickel maraging steel Part 1 — Unlubricated conditions

The effect of cutting speed and tool wear land length on the surface damage produced during the machining of annealed 18% nickel maraging steel under dry orthogonal conditions was determined. Machined test pieces were examined with a scanning electron microscope and an optical microscope. Surface roughness was determined with a profilometer.The results of the investigation show that during machining a wide variety of different forms of surface damage is generated. The machined surfaces show extended regions where both coarse and fine scale surface damage have occurred at cutting speeds up to 0.1 m s^?1, whereas at cutting speeds greater than 0.1 m s^?1 the surfaces show evidence only of fine scale surface damage. It is suggested that the regions of coarse scale surface damage are associated with the phenomenon of partially discontinuous chip formation and the nucleation of cracks in the vicinity of the tool nose region. Several mechanisms of crack nucleation and propagation, which are thought to account for the occurrence of many aspects of the surface topography observed, are presented and discussed. It is suggested also that the regions of fine scale surface damage are associated with the phenomenon of continuous chip formation and interaction between the tool nose region and the freshly machined workpiece surface.It is shown that scanning electron microscopy is more indicative of the true condition of the surface than surface roughness measurements.     

The role of tool composition and tool geometry in controlling the surface finish in machining wood

An examination of several brazed cemented carbide tool inserts that were used in service for cutting cured (dry) pine is described. A laboratory test is also described where the relative resistance to chipping of the brazed tool inserts was measured.It is shown that tool wear occurs through a continuous increase in the tool cutting edge radius that produces a deterioration in the appearance of the machined surface. It is also shown that an increase in either the binder volume fraction or the tool wedge angle produces an increase in the energy absorbed on impact. It is suggested that if progressive wear determines the useful life of a cemented carbide cutting tool then a low volume fraction of binder is required whereas if tool edge chipping determines the useful life of a cutting tool then a large volume fraction of binder and a large tool wedge angle are required.     

VEDA: a web-based virtual environment for dynamic atomic force microscopy

We describe here the theory and applications of virtual environment dynamic atomic force microscopy (VEDA), a suite of state-of-the-art simulation tools deployed on nanoHUB (www.nanohub.org) for the accurate simulation of tip motion in dynamic atomic force microscopy (dAFM) over organic and inorganic samples. VEDA takes advantage of nanoHUB's cyberinfrastructure to run high-fidelity dAFM tip dynamics computations on local clusters and the teragrid. Consequently, these tools are freely accessible and the dAFM simulations are run using standard web-based browsers without requiring additional software. A wide range of issues in dAFM ranging from optimal probe choice, probe stability, and tip-sample interaction forces, power dissipation, to material property extraction and scanning dynamics over hetereogeneous samples can be addressed.     

Image segmentation for improved consistency in image-interpretation of opium poppy

The image-interpretation of opium poppy crops from very high resolution satellite imagery forms part of the annual Afghanistan opium surveys conducted by the United Nations Office on Drugs and Crime and the United States Government. We tested the effect of generalization of field delineations on the final estimates of poppy cultivation using survey data from Helmand province in 2009 and an area frame sampling approach. The sample data was reinterpreted from pan-sharpened IKONOS scenes using two increasing levels of generalization consistent with observed practice. Samples were also generated from manual labelling of image segmentation and from a digital object classification. Generalization was found to bias the cultivation estimate between 6.6% and 13.9%, which is greater than the sample error for the highest level. Object classification of image-segmented samples increased the cultivation estimate by 30.2% because of systematic labelling error. Manual labelling of image-segmented samples gave a similar estimate to the original interpretation. The research demonstrates that small changes in poppy interpretation can result in systematic differences in final estimates that are not included within confidence intervals. Segmented parcels were similar to manually digitized fields and could provide increased consistency in field delineation at a reduced cost. The results are significant for Afghanistan’s opium monitoring programmes and other surveys where sample data are collected by remote sensing.     

Approximating the Negative Binomial

This paper presents the results of a numerical investigation of six approximations to the cumulative negative binomial distribution. The approximations studied include two Poissons, Poisson Gram-Charlier, Normal, Normal Gram-Charlier and the Camp-Paulson. Two approximations were found to be extremely good: the Poisson Gram-Charlier when the probability p is large, and the Camp-Paulson almost everywhere.