Wide-band fiber optic signal processor

Operation of a 16-tap fiber-optic delay line configured as a bandpass filter with a fundamental frequency of 2.0 GHz over the frequency range from 0 to 12.5 GHz is discussed. Equal tap weights and spacings were used to facilitate comparison of experimental and predicted results. More than 10¹¹ analog multiplications per second are performed in this relatively simple signal processing system. Other processors for performing functions such as matched filtering and correlation can be implemented by appropriate choice of the mirror reflectances and fiber lengths     

Mean value analysis of closed queueing networks with Erlang service time distributions

The classical mean value analysis approach is extended to single class closed queueing networks containing Erlang service time distributions and FCFS scheduling disciplines. A new formula for the mean residence time of jobs is derived. Each iteration provides self-checks for validity, and is repeated whenever invalid results are detected. On the average, the solutions obtained vary by less than five percent from their respective simulation results.     

Development of sealing compositions with nanostructure iron-based fillers

The possibility of utilizing nanopowders of iron and Fe-Co-Ni produced bu a thermochemical method in the fabrication of sealing composition materials is investigated. It is established that such hermetic sealing composition materials function reliably under extremal conditions and guarantee elevated strength of adhesion to the surface of the metal and high corrosion and temperature stability. __________ Translated from Poroshkaya Metallurgiya, Nos. 3–4(448), pp. 112–117, March–April, 2006.     

Applying the common criteria in systems engineering

The National Institute of Standards and Technology has proposed using the common criteria and system-level protection profiles (SLPPs) to specify security requirements in large systems, such as those used in air traffic management. This article summarizes experience with SLPP and security targets for the US Federal Aviation Administration's National Airspace System. The authors review the FAA efforts, highlight the problems encountered, and offer suggestions for future work, calling for more research on linking systems, software, and security requirements engineering with SLPP; clearer ties between security specifications and system certification; and better guidance on the appropriate use of SLPP as a prerequisite to widespread use.     

A compact full MMIC module for Ku-band phase-lockedoscillators

A compact Ku-band phase-locked oscillator module has been developed in a full MMIC (monolithic microwave integrated circuit) configuration. The module includes an MMIC voltage-controlled oscillator, an analog frequency divider, and interstage amplifiers. The constituent monolithic chips are integrated in a very small single-package module and operate at the target frequencies without any external trimming or matching network. The oscillator is tuned more than 1 GHz with a constant output amplitude. The frequency-divided output is also obtained over the whole tuning range. Spurious output is not found at any frequency up to 22 GHz. In spite of the very low-Q factor of GaAs monolithic circuitry, the oscillator phase noise exhibited is less than -80 dBc/Hz, due to the high-gain, high-speed phase lock     

Investigation of Petroleum Refinery Effluent Treatment in an Aerobic Fixed-film Biological System

T he feasibility of treating a synthetic toxic waste and a petroleum refinery effluent was evaluated using a four-stage, fixed-film aerated bioreactor with a 50 I capacity and a surface area-to-volume ratio of 72. The process performance at various waste strengths and influent flow rates was found satisfactory.
Organic loading proved to be a better operational or design parameter. Treatment efficiency decreased as the loading was increased. An organic loading of 42 g COD/m2d or less is recommended to ensure good quality effluent. The reactor coped with organic and hydraulic overloads because of the good oxygen transfer capacity and the considerable quantity of attached biomass attained. Staging of the reactor was effective in damping excessive loadings.
Treatment of the refinery waste in the bioreactor removed up to 80 per cent of the COD and reduced the oil, sulphide and amm.N concentrations substantially, but polishing of reactor effluent using alum treatment improved effluent quality for potential reuse.     

Evaluation of a system of wind tunnels for field studies of ammonia loss from grassland through volatilisation

Rates of ammonia (NH₃) loss from a ryegrass sward measured using a system of small wind tunnels were compared with concurrent measurements made using a micrometeorological mass balance method. Measurements were made during two experiments within a circular plot (radius 10m) treated with urea at a rate of 200kgNha^?1. In the first experiment, air speed through the tunnels was adjusted as necessary to maintain a value of approximately 1ms^?1. This value differed on most occasions from the mean ambient wind speed which was measured at a height of 250mm and which ranged from 0.61 to 2.95ms^?1. Rates of loss measured using the wind tunnels differed by a factor of between two and five from those measured using the mass balance method; there was no consistent pattern in the differences between the rates of loss. The total losses of NH₃ measured during 15 days were equivalent to 49.1 and 30.2kg Nha^?1 for the mass balance and wind tunnel methods, respectively. In the second experiment, air speed through the tunnels was adjusted as necessary to maintain a value as close as possible to the mean ambient wind speed measured at a height of 250mm. Rates of NH₃ loss measured using the two methods did not differ significantly; total losses of NH₃ during 17 days were equivalent to 96.9 and 101kg Nha^?1 for the mass balance and wind tunnel methods, respectively. The difference between the findings of the two experiments could be attributed to the direct effect of air speed through the tunnels rather than to differences between ambient temperatures and those inside the tunnels. During and following periods of rain the rates of loss measured using the tunnels were up to six times greater than those observed with the mass balance method. Rates of loss measured by the two methods became similar again when the tunnels were moved following rain. The study demonstrates that enclosures can be designed and operated to provide reliable measurements of the rate of NH₃ loss from grassland. Potential applications of the two methods are discussed.