A fully distributed power control algorithm for cellular mobilesystems

Several distributed power control algorithms that can achieve carrier-to-interference ratio (CIR) balancing with probability one have been proposed previously for cellular mobile systems. In these algorithms, only local information is used to adjust transmitting power. However, a normalization procedure is required in each iteration to determine transmitting power and, thus, these algorithms are not fully distributed. In this paper, we present a distributed power control algorithm which does not need the normalization procedure. We show that the proposed algorithm can achieve CIR balancing with probability one. Moreover, numerical results reveal our proposed scheme performs better than the algorithm presented in Grandhi et al. [1994]. The excellent performance and the fully distributed property make our proposed algorithm a good choice for cellular mobile systems     

Ultra-wideband (from DC to 110 GHz) CPW to CPS transition

A new ultra-wideband, low-loss and small-size coplanar waveguide (CPW) to coplanar strip (CPS) transition which can be used from DC to 110 GHz is presented. The proposed transition connects CPW with CPS by the reformed air-bridge. Two ground planes of CPW are tied at their ends by a line and the centre of the line is connected to the ground strip of CPS by another line. Owing to the symmetry of the proposed structure, the currents of two ground planes of CPW are combined with the same phase and transferred to the ground strip of CPS. With height of 3 μm, the signal line of CPW passes over two connecting lines and is connected to the signal strip of CPS. For the back-to-back transition structure, insertion loss <1 dB and return loss >15 dB are obtained from 0.5 to 110 GHz     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

A fast motion estimation algorithm based on the block sum pyramid

In this correspondence, a fast approach to motion estimation is presented. The algorithm uses the block sum pyramid to eliminate unnecessary search positions. It first constructs the sum pyramid structure of a block. Successive elimination is then performed hierarchically from the top level to the bottom level of the pyramid. Many search positions can be skipped from being considered as the best motion vector and, thus, the search complexity can be reduced. The algorithm can achieve the same estimation accuracy as the full search block matching algorithm with much less computation time.     

Fracture initiation at a crack or notch in a viscoplastic material under high rate loading

The two-dimensional problem of an edge crack in a half space or plate is considered. The body is loaded by a suddenly applied, spatially uniform normal velocity imposed on the plane boundary of the body on one side of the edge crack. Otherwise, the boundary of the body, including the crack faces, is traction free. Both cases of an initially sharp crack tip and a narrow notch with small but nonzero notch root radius are considered. The material is modeled as elastic viscoplastic, including strain hardening, rate sensitivity and thermal softening. The applied loading produces predominantly mode II loading in the crack tip region. Under these conditions it is possible to nucleate an adiabatic shear band at the crack tip as a precursor to a mode II fracture. On the other hand, because of the rate sensitivity of the material and the high rate of loading, it may be possible under certain conditions to generate tensile stresses in the crack tip region sufficiently large to nucleate brittle tensile fracture. The problem is solved numerically by means of the finite element method in order to investigate the competition between these two possible fracture initiation mechanisms. The magnitude of the impact velocity imposed on the edge of the plate and the notch tip acuity have an effect on processes near the crack tip. For given material, the inception of crack growth is determined by the competition between a stress-based brittle fracture condition, associated with rate sensitivity and strain hardening, and a strain based criterion, associated with high strain rate and thermal softening.     

Quartz microbalance study of4He and H2 on sodium

A quartz microbalance technique has been used to study the growth of⁴He and H₂ adsorbed on sodium. In contrast to cesium, adsorption of⁴He and H₂ do occur on a sodium surface.     

Quantitative NMR spectroscopy by matrix pencil methods

The matrix pencil (MP) method, based on the singular value decomposition (SVD), is applied to quantitative NMR spectroscopy. Its relationship to other SVD-based methods is also presented. Simulations and applications are given to demonstrate the capability of superior performance.©1993 John Wiley & Sons Inc     

Parallel BIST architecture for CAMs

A new parallel test algorithm and a built-in self test (BIST) architecture for efficient testing of various types of functional faults in content addressable memories (CAMs) are developed. The results show that efficient and practical testing with very low complexity and area overhead can be achieved     

Simple approximations of the DC flux influence on the core losspower electronic ferrites and their use in design of magnetic components

The effect of DC flux on the core loss is examined for the practical range of power and frequency. Relevant core loss equations are derived and applied to an optimization algorithm to determine the minimum core loss at a given ratio of s (DC flux density to AC peak flux density). It has been found that the curves of hysteresis loss density versus the ratio of s exhibit a peak at a critical ratio. Below or above this critical ratio, the loss density decreases drastically. On the other hand, the curves of eddy-current loss density versus the ratio of s exhibits a minimum point at a critical ratio. Below or above this critical ratio, the loss density increases gradually     

Solving the gate packing problem using a concurrent network

The layout problem of gate matrices and one-dimensional logic arrays is composed of two major tasks: to find a permutation of gates which minimises the number of tracks required and to layout/pack gates based on the ordering. A parallel algorithm is presented which can pack n gates within O(1) time, whereas the conventional near-optimum algorithm needs O(n/sup 2/) time. The simulation results show that the increase of the problem size does not degrade the solution quality.<>