On the optimal design of water distribution networks: a practical MINLP approach

We propose a practical solution method for real-world instances of a water-network optimization problem with fixed topology using a nonconvex continuous NLP (NonLinear Programming) relaxation and a MINLP (Mixed Integer NonLinear Programming) search. Our approach employs a relatively simple and accurate model that pays some attention to the requirements of the solvers that we employ. Our view is that in doing so, with the goal of calculating only good feasible solutions, complicated algorithmics can be confined to the MINLP solver. We report successful computational experience using available open-source MINLP software on problems from the literature and on difficult real-world instances. An important contribution of this paper is that the solutions obtained, besides being low cost, are immediately usable in practice because they are characterized by an allocation of diameters to pipes that leads to a correct hydraulic operation of the network. This is not the case for most of the other methods presented in the literature.     

Gheo‐shih: an ancient pre‐Columbian plaza

This paper describes the configuration and cultural context of the oldest known designed space in central America, Gheo‐Shih, dating from 5,000 – 4,000 BC. This site may have been a ceremonial space, being employed in a similar fashion to ceremonial spaces of Native American cultures from the North American Great Basin. It contains physical features that set precedents and are similar to the geomantic features of later nearby Mesoamerican cultures.     

A practical clinical trial of coordinated care management to treat substance use disorders among public assistance beneficiaries.

This study tested whether coordinated care management (CCM), a continuity of care intervention for substance use disorders (SUD), improved rates of abstinence when compared with usual welfare management for substance-using single adults and adults with dependent children applying for public assistance. The study was designed as a practical clinical trial and was implemented in partnership with a large city welfare agency. Participants were 421 welfare applicants identified via SUD screening and assigned via an unbiased computerized allocation program to a site that provided either CCM (n = 232) or usual care (UC; n = 189). Outcomes were assessed for 1 year postbaseline with self-reports and biological measures of substance use. As hypothesized, for participants not enrolled in methadone maintenance programs (n = 313), CCM clients received significantly more services than did UC clients. Nonmethadone CCM also showed significantly higher abstinence rates (odds ratio = 1.75; 95% confidence interval = 1.12, 2.76; d = 0.31) that emerged early in treatment and were sustained throughout follow-up. In contrast, no treatment services or outcome effects were found for methadone maintenance clients (n = 108). Findings suggest that CCM is promising as a wraparound to SUD treatment for welfare recipients. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Thermomechanical properties of copper–carbon nanofibre composites prepared by spark plasma sintering and hot pressing

Several types of carbon nanofibres (CNF) were coated with a uniform and dense copper layer by electroless copper deposition. The coated fibres were then sintered by two different methods, spark plasma sintering (SPS) and hot pressing (HP). The Cu coating thickness was varied so that different volume fraction of fibres was achieved in the produced composites. In some cases, the CNF were pre-coated with Cr for the improvement the Cu adhesion on CNF. The results show that the dispersion of the CNF into the Cu matrix is independent of the sintering method used. On the contrary, the dispersion is directly related to the efficiency of the Cu coating, which is tightly connected to the CNF type. Overall, strong variations of the thermal conductivity (TC) of the composites were observed (20–200 W/mK) as a function of CNF type, CNF volume fraction and Cr content, while the coefficient of thermal expansion (CTE) in all cases was found to be considerably lower than Cu (9.9–11.3 ppm/K). The results show a good potential for SPS to be used to process this type of materials, since the SPS samples show better properties than HP samples even though they have a higher porosity, in applications where moderate TC and low CTE are required.     

An integration architecture for the automation of a continuous production complex

The development of integrated automation systems for continuous production plants is a very complicated process. A variety of factors must be taken into account, such as their different components (e.g., production units control systems, planning systems, financial systems, etc.), the interaction among them, and their different behavior (continuous or discrete). Moreover, the difficulty of this process is increased by the fact that each component can be viewed in a different way depending on the kind of decisions to be made, and its specific behavior. Modeling continuous production complexes as a composition of components, where, in turn, each component may also be a composite, appears to be the simplest and safest way to develop integrated automation systems. In order to provide the most versatile way to develop this kind of system, this work proposes a new approach for designing and building them, where process behavior, operation conditions and equipment conditions are integrated into a hierarchical automation architecture.     

Negligible depletion solid-phase microextraction with radiolabeled analytes to study free concentrations and protein binding: an example with [3H]estradiol

A new method is presented that enables sensitive measurement of free concentrations of radiolabeled ligands. Additionally, protein binding of radiochemicals in complex matrixes can be determined with this new technique that combines negligible depletion solid-phase microextraction (nd-SPME) with liquid scintillation counting (LSC) as detection. [3H]Estradiol was taken as an example compound. Possible matrix effects of protein on fiber uptake kinetics were studied. No matrix effect was found, either by fouling of the fiber, or by changed uptake kinetics. The validity of the method was shown in the determination of the affinity constant (Ka) of estradiol for human serum albumin (HSA). The Ka was estimated at 8.9 x 10(4) M(-1), which corresponds well with literature values. This study shows that nd-SPME is suitable to study the free concentration and protein binding of [3H]estradiol. The method described in this paper combines the advantages of nd-SPME with the advantages of radiolabeled analytes, creating a timesaving, simple, and sensitive analytical tool that will be particularly useful in complex matrixes containing many potential interferences for chromatographic methods.     

Estimating the Hydraulic Conductivity of Landfilled Municipal Solid Waste Using the Borehole Permeameter Test

This paper reports the in situ field saturated hydraulic conductivity of municipal solid waste at a landfill in Florida. The saturated hydraulic conductivity (Ks) was estimated at 23 locations using the borehole permeameter test, a method commonly used for determination of the Ks of unsaturated soil. The Ks of the landfilled waste was found to range from 5.4×10?6 to 6.1×10?5?cm/s. The Ks was found to be on the lower end of the range of Ks reported by previous studies. The hydraulic conductivity of the waste decreased with depth, the likely result of greater overburden pressures associated with deep locations of the landfill. Permeability values (kw) of the landfilled waste calculated based on Ks were compared with permeability values estimated using air as the fluid (air permeability, ka). Values of ka were found to be approximately three orders of magnitude greater than those of kw. The lower permeability of the waste to water was primarily attributed to entrapped gas. Other factors such as potential clogging of media and short-circuiting of air along the well may also have contributed to the differences in ka and kw.