Technologies for Single-Cell Isolation

The handling of single cells is of great importance in applications such as cell line development or single-cell analysis, e.g., for cancer research or for emerging diagnostic methods. This review provides an overview of technologies that are currently used or in development to isolate single cells for subsequent single-cell analysis. Data from a dedicated online market survey conducted to identify the most relevant technologies, presented here for the first time, shows that FACS (fluorescence activated cell sorting) respectively Flow cytometry (33% usage), laser microdissection (17%), manual cell picking (17%), random seeding/dilution (15%), and microfluidics/lab-on-a-chip devices (12%) are currently the most frequently used technologies. These most prominent technologies are described in detail and key performance factors are discussed. The survey data indicates a further increasing interest in single-cell isolation tools for the coming years. Additionally, a worldwide patent search was performed to screen for emerging technologies that might become relevant in the future. In total 179 patents were found, out of which 25 were evaluated by screening the title and abstract to be relevant to the field.     

Aryl Bis‐Sulfonamide Inhibitors of IspF from Arabidopsis thaliana and Plasmodium falciparum

2‐Methylerythritol 2,4‐cyclodiphosphate synthase (IspF) is an essential enzyme for the biosynthesis of isoprenoid precursors in plants and many human pathogens. The protein is an attractive target for the development of anti‐infectives and herbicides. Using a photometric assay, a screen of 40 000 compounds on IspF from Arabidopsis thaliana afforded symmetrical aryl bis‐sulfonamides that inhibit IspF from A. thaliana (AtIspF) and Plasmodium falciparum (PfIspF) with IC₅₀ values in the micromolar range. The ortho‐bis‐sulfonamide structural motif is essential for inhibitory activity. The best derivatives obtained by parallel synthesis showed IC₅₀ values of 1.4 μm against PfIspF and 240 nm against AtIspF. Substantial herbicidal activity was observed at a dose of 2 kg ha^?1. Molecular modeling studies served as the basis for an in silico search targeted at the discovery of novel, non‐symmetrical sulfonamide IspF inhibitors. The designed compounds were found to exhibit inhibitory activities in the double‐digit micromolar IC₅₀ range.     

Ecofriendly modification of acetosolv lignin from oil palm biomass for improvement of PMMA thermo‐oxidative properties

The environmentally friendly esterification of acetosolv lignin (AL), obtained from pressed oil palm mesocarp fibers, is described, for the improvement of thermo‐oxidative properties of poly(methyl methacrylate) (PMMA) films. Acetylation of AL was performed in ecofriendly conditions using acetic anhydride in the absence of catalysts. Acetylated acetosolv lignin (AAL) was successfully obtained in only 12 min with a solvent‐free and catalyst‐free microwave‐assisted procedure. Lignins were characterized by Fourier transform infrared spectroscopy, size exclusion chromatography, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC), confirming the efficacy of the methodology employed. AL and AAL as fillers in different concentrations (1% and 5%) were added to PMMA films. The thermal and mechanical properties of the lignin‐incorporated films were analyzed by TGA, DSC, and dynamic mechanical analysis (DMA). The films incorporated with lignin and acetylated lignin presented initial degradation temperature (T_onset) and onset oxidative temperature (OOT) values higher than pure PMMA films, contributing thus to an enhancement of thermo‐oxidative stability of PMMA. The DMA analyses showed that incorporation of AL or AAL increased the storage modulus (E′) of PMMA films, but did not affect their glass‐transition temperatures (T_g). The results indicate the potential use of oil palm mesocarp lignin to enhance the thermo‐oxidative properties of PMMA without compromising its mechanical response. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45498.     

Control of the Preferred Orientation in MFI Films Synthesized by Seeding

Single crystal silicon and quartz wafers were seeded with colloidal TPA-silicalite-1 crystals. Hydrothermal treatment of the seeded substrates was used to grow dense MFI films. The preferred orientation of the crystals constituting the films as a function of the amount and size of seeds, film thickness and hydrothermal treatment conditions was investigated. In thin films, most of the crystalline material was found to be oriented with the b-axes close to perpendicular to the substrate surface. In thick films, the a- or c-axes were close to perpendicular to the substrate surface depending on the conditions used for hydrothermal treatment. The seed size and amount was found to affect the rate of change in preferred orientation as a function of film thickness. A film growth mechanism which is able to explain the experimental results is proposed.     

Indentation Damage and Residual Stress Field in Alumina-Y2O3-Stabilized Zirconia Composites

Fracture features, residual stresses, and zirconia transformation are studied in indentation strength specimens of alumina-Y₂O₃-stabilized zirconia (3% mol of Y₂O₃, 3YTZP) ceramics in order to analyze the extension of the indentation damage in the bulk of the specimens. Two compositions, 5 vol% 3YTZP (A5) and 40 vol% 3YTZP (A40), have been prepared by stacking tape-casted tapes and sintering. After indentation with loads ranging from 50 to 300 N, samples were fractured in four-point bending and the fracture surfaces were characterized by scanning electron microscopy. Raman and piezospectroscopic techniques were used to determine the monoclinic zirconia fraction and the residual stresses through the fracture surfaces. In the A5 composition, the indentation damage morphology was clearly half-penny, whereas the A40 composition presented Palmqvist crack formation. Zirconia transformation was only observed in the plastically deformed zones underneath the imprints whereas there were significant residual compressive stresses outside the plastic zones due to the indentation damage. The intensity of this residual compressive field was dependent on the level of zirconia transformation due to indentation damage because zirconia transformation induced tensile stress fields superimposed on the compressive stresses.     

The dynamic transformation of deformed austenite at temperatures above the Ae3

Recent observations regarding the dynamic transformation of deformed austenite at temperatures above the Ae₃ are reviewed. Experimental results obtained on four different steels over the temperature range from 743 to 917 °C and at strains up to ε = 5 are described. It is shown that there is a critical strain for the formation of superequilibrium ferrite and that the volume fraction of transformed ferrite increases with the strain. The structures observed are Widmanstätten in form and appear to have nucleated displacively. The effect of deformation on the Gibbs energy of austenite is estimated by assuming that the austenite continues to work-harden after initiation of the transformation and that its flow stress and dislocation density can be derived from the experimental flow curve by making suitable assumptions about two-phase flow. By further taking into account the inhomogeneity of the dislocation density, Gibbs energy contributions (driving forces) are derived that are sufficient to promote transformation as much as 100 °C above the Ae₃. The C diffusion times required for the dynamic formation of the cementite particles observed are estimated. These range from ～25 to 100 μs and are therefore consistent with the times available during rolling. The Gibbs energy calculations suggest that growth of the Widmanstätten ferrite is followed by C diffusion at the lower carbon contents, while it is accompanied by C diffusion at the higher carbon levels.     

Functional Coupling of Slack Channels and P2X3 Receptors Contributes to Neuropathic Pain Processing

The sodium-activated potassium channel Slack (K_Na1.1, Slo2.2, or Kcnt1) is highly expressed in populations of sensory neurons, where it mediates the sodium-activated potassium current (I_KNa) and modulates neuronal activity. Previous studies suggest that Slack is involved in the processing of neuropathic pain. However, mechanisms underlying the regulation of Slack activity in this context are poorly understood. Using whole-cell patch-clamp recordings we found that Slack-mediated I_KNa in sensory neurons of mice is reduced after peripheral nerve injury, thereby contributing to neuropathic pain hypersensitivity. Interestingly, Slack is closely associated with ATP-sensitive P2X3 receptors in a population of sensory neurons. In vitro experiments revealed that Slack-mediated I_KNa may be bidirectionally modulated in response to P2X3 activation. Moreover, mice lacking Slack show altered nocifensive responses to P2X3 stimulation. Our study identifies P2X3/Slack signaling as a mechanism contributing to hypersensitivity after peripheral nerve injury and proposes a potential novel strategy for treatment of neuropathic pain.     

Droplet Entrainment Analysis in a Flash Evaporator with an Image-Based Measurement Technique

Local droplet sizes and volumes of entrained liquid are captured with an image-based measurement technique for comparison with a conventional, integral method for entrainment analysis. Experiments in a forced circulation flash evaporation were performed for different operating conditions and with two different chemical systems. Droplet size and frequency rise with an increase in thermal energy input. The local readings confirm the trends found by the integral measurement method. The modification of the image-based probe enables the detection of small (≈ 10 µm) and at the same time fast droplets under challenging operating conditions, such as vacuum and superheated feed similar to industrial process conditions.     

无线技术拓展过程控制的视野

使用新型的无线技术，能够方便快捷地采集和传递以往难以访问的现场数据，这无疑为现代过程控制领域打开了一个视野更为开阔的窗口。