Floral Odor Bouquet Loses its Ant Repellent Properties After Inhibition of Terpene Biosynthesis

In their natural environment, plants are synchronously confronted with mutualists and antagonists, and thus benefit from signals that contain messages for both functional groups of interaction partners. Floral scents are complex blends of volatiles of different chemical classes, including benzenoids and terpenoids. It has been hypothesized that benzenoids have evolved as pollinator attracting signals, while monoterpenoids serve as defensive compounds against antagonists. In order to test this hypothesis, we reduced terpene emission in flowers of Phlox paniculata with specific biosynthetic inhibitors and compared the responses of Lasius niger ants to natural and inhibited floral scent bouquets. While the natural odors were strongly repellent to ants, the bouquets with a reduced emission rate of terpenoids were not. The loss of the flowers’ ability to repel ants could be attributed predominantly to reduced amounts of linalool, a monoterpene alcohol. Flying flower visitors, mainly hoverflies, did not discriminate between the two types of flowers in an outdoor experiment. Since individual compounds appear to be capable of either attracting pollinators or defending the flower from enemies, the complexity of floral scent bouquets may have evolved to allow flowers to respond to both mutualists and antagonists simultaneously.     

Increased response/recovery lifetimes and reinforcement of polyaniline nanofiber films using carbon nanotubes

We have prepared high surface area, conductive, mechanically robust, responsive polyaniline–carbon nanotube composite films. These were produced by filtration from dilute dispersions of polyaniline nanofibers and single-walled carbon nanotubes. Unlike polyaniline alone, these composites are mechanically stable, maintain large intractable surfaces and exhibit greatly enhanced response/recovery behavior to changes in their local environment. This is illustrated by exposing the films to ammonia.     

Use of laser scanning confocal microscopy for characterizing changes in film thickness and local surface morphology of UV-exposed polymer coatings

Laser scanning confocal microscopy (LSCM) has been used to characterize the changes in film thickness and local surface morphology of polymer coatings during the UV degradation process. With the noninvasive feature of LSCM, one can obtain thickness information directly and nondestructively at various exposure times without destroying the specimens or deriving the thickness values from IR measurement by assuming uniform film ablation. Two acrylic polymer coatings were chosen for the study, and the physical and chemical changes of the two systems at various exposure times were measured and analyzed. Those measurable physical changes caused by UV exposure include film ablation, formation of pits and other surface defects, and increases in surface roughness. It was found in both coatings that changes in measured film thickness by LSCM were not correlated linearly to the predicted thickness loss using the changes in the CH band obtained by the Fourier Transform Infrared (FTIR) spectroscopy measurements in the later degradation stages. This result suggested it was not a uniform film ablation process during the UV degradation. At later stages, where surface deformation became severe, surface roughness and profile information using LSCM were also proven to be useful for analyzing the surface degradation process Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 13–14, 2004 in Philadelphia, PA.     

Experimental evidence of a relationship between monomer plasma residence time and carboxyl group retention in acrylic acid plasma polymers

Decreasing carboxyl retention in deposits from the glow region of an acrylic acid plasma was measured by X-ray photoelectron spectroscopy and chemical derivatisation as the collection distance from the monomer vapour inlet was increased. Volatilisation of plasma polymerised acrylic acid was detected after trifluoroethanol derivatisation; this is correlated with evaporation of low molecular weight components observed previously.     

Flexible polymer composite electromagnetic crystals

The dielectric properties of a ceramic powder (BaTiO₃) filled thermoplastic elastomer (EPDM TPE) were investigated for use in a flexible electromagnetic crystal. Materials were produced that had a high dielectric constant (approximately 9) and low loss tangent (less than 0.01). Materials were extruded and injection molded so as to povide low‐cost processing. Mechanical and electromagnetic test results showed the effect of processing conditions on the final quality of the composite. The shear rate during processing and the number of mixing cycles were found to affect the final material characteristics significantly. An electromagnetic crystal woven from extruded rods showed good reflectivity in the 10–15 GHz region.     

The role of microstructure on high-temperature oxidation behavior of hafnium carbide

Microstructure development of the products formed upon oxidation of hafnium carbide (HfC_x, x = 0.65, 0.81, or 0.94) at 1300°C and 0.8 mbar oxygen pressure was investigated using Raman spectroscopy, X-ray diffraction, electron microscopy, and electron energy-loss spectroscopy. For all specimens a multilayered oxide scale was observed featuring an outermost porous hafnia layer and an interlayer adjacent to the parent carbide containing hafnia interspersed with carbon. The outermost hafnia features coarse pores presumably formed during initial stages of oxidation to allow rapidly evolving gaseous products to escape from the oxidation front. As the oxidation scale thickens, diffusional resistance results in slower oxidation rates and smaller quantities of gaseous products that are removed via networks of increasingly fine pores until the local oxygen partial pressure is sufficiently low to selectively oxidize the parent carbide. Electron microscopy studies suggest that the oxidation sequence at this stage begins with the transformation of parent carbide to an amorphous material having empirical formula HfO₂C_x that subsequently phase separates into hafnia and carbon domains. Hafnia polymorphs in the phase-separated region vary from cubic to monoclinic as grains coarsen from ca. 2–20 nm, respectively. Immediately adjacent to the phase-separated region is carbon-free mesoporous hafnia whose pore morphology is inherited from that of prior carbon domains. The average pore size and pore volume fraction observed in mesoporous hafnia are consistent with predictions from kinetic models that ascribe gaseous diffusion through a pore network as the rate determining step in oxidation behavior of hafnium carbide. These observations imply that high-temperature oxidation behavior of hafnium carbide under the employed test conditions is linked to microstructure development via phase separation and coarsening behaviors of an initially formed amorphous HfO₂C_x product.     

Characterization of biodegradable core–clad borosilicate glass fibers with round and rectangular cross-section

Here, we report on core–clad bioactive borosilicate fibers, that we have prepared both with round and rectangular cross-section profile. The exposed approach, which relies on the stacking and drawing of glass slabs, demonstrates our ability to develop bioactive-based glass fibers with tailored cross-section profiles. Tens-of-meters-long fibers were successfully drawn, although suffering from elevated losses in the case of the rectangular ones. The response of the fibers in simulated body fluid was studied for both geometries. We found that a round cladding can act as protective layer, tempering effects of the corrosion. We also noticed that rectangular fibers are more prone to degradation, the enhanced corrosion beginning from their sharp corners as they accumulated residual tensile stress during drawing. To the best of our knowledge, this is the first report on the effect of residual tensile stresses from surface tension deformations applied to the corrosion of rectangular fibers. As geometry plays a critical role on the biodegradation behavior of the fiberglass, we believe the enclosed results could lead to the design of fiber devices with tailored cross-section profile in order to tune their rate of degradation on solely based geometrical effects.     

Metal Organic Frameworks for Natural Gas Storage in Vehicles

With the increasing demand for alternative fuels the storage of natural gas (NG) in adsorbents like metal organic frameworks (MOFs) will become more important. In order to use MOFs as storage media in fuel delivery systems, the optimization of mass and energy transfer of the system is crucial. For rapid NG filling of a tank, molecules need to reach the adsorption sites within a reasonable time while the heat of adsorption should be dissipated to the environment. In this article, mass transfer in shaped bodies of MOFs was determined by permeability measurements and pulsed field gradient (PFG) NMR spectroscopy. The heat dissipation was also experimentally measured and both data sets were used to set up a theoretical density function theory model to predict the behavior of MOFs for NG storage.     

Least tail‐trimmed squares for infinite variance autoregressions

We develop a robust least squares estimator for autoregressions with possibly heavy tailed errors. Robustness to heavy tails is ensured by negligibly trimming the squared error according to extreme values of the error and regressors. Tail‐trimming ensures asymptotic normality and super‐‐convergence with a rate comparable to the highest achieved amongst M‐estimators for stationary data. Moreover, tail‐trimming ensures robustness to heavy tails in both small and large samples. By comparison, existing robust estimators are not as robust in small samples, have a slower rate of convergence when the variance is infinite, or are not asymptotically normal. We present a consistent estimator of the covariance matrix and treat classic inference without knowledge of the rate of convergence. A simulation study demonstrates the sharpness and approximate normality of the estimator, and we apply the estimator to financial returns data. Finally, tail‐trimming can be easily extended beyond least squares estimation for a linear stationary AR model. We discuss extensions to quasi‐maximum likelihood for GARCH, weighted least squares for a possibly non‐stationary random coefficient autoregression, and empirical likelihood for robust confidence region estimation, in each case for models with possibly heavy tailed errors.     

Resuspension of Particulate Matter from Carpet Due to Human Activity

This work investigated the resuspension and subsequent translocation of particulate matter (PM) from carpeted flooring surfaces due to walking. In addition, the effect of HVAC systems and ceiling fans on mixing and/or translocation of resuspended PM was studied. Testing took place both in a residence with a well-worn, soiled carpet and in an environmental test chamber. Prescribed walking occurred with PM measurements taken at multiple sampling heights. Scanning electron microscopy (SEM) of carpet fibers was used to determine the fraction of dust available for resuspension. These data, in conjunction with resuspended mass concentrations from this study, were used to generate emission factors by particle size for walking on both new and worn carpet.

Carpet loading does not affect the emission factor, indicating that the amount of resuspended PM is directly proportional to the available PM in the carpet. While relative humidity (RH) plays an important role in resuspension from new carpets, with high RH enhancing resuspension, it has the opposite affect with old carpets, with increased RH decreasing resuspension. With the HVAC system on, translocated particles 1.2 m horizontally from the source had number concentrations of approximately 20–40% of those at the source. With a ceiling fan on, extensive mixing was noted with little difference seen in particle resuspension by height. With the ceiling fan off, there was very little mixing present and particle size varied substantially by height.