Preparation of Pt-Re/Vulcan carbon nanocomposites using a single-source molecular precursor and relative performance as a direct methanol fuel cell electrooxidation catalyst

Pt-Re/Vulcan carbon powder nanocomposites have been prepared with total metal loadings of 18 wt.% and 40 wt.% using a new non-cluster (1:1)-PtRe bimetallic precursor as the source of metal. Pt-Re nanoparticles having an average diameter of ca. 6 nm and atomic stoichiometry near 1:1 are formed. TEM, on-particle HR-EDS, and powder XRD data are consistent with the formation of Pt-Re alloy nanoparticles having a hexagonal unit cell with cell constants of a = 2.77 A and c = 4.47 A. A nanocomposite prepared at higher total metal loading under more rigorous thermal treatment also contains Pt-Re alloy nanoparticles having a fcc unit cell structure (a = 3.95 A). The precise dependence of Pt-Re nanocrystal structure on the thermal history of the nanocomposite specimen has not been investigated in detail. While these Pt-Re/carbon nanocomposites are active as anode catalysts in operating direct methanol fuel cells, the measured performance is less than that of commercial Pt-Ru/carbon catalysts and has marginal practical importance.     

A neutral loss activation method for improved phosphopeptide sequence analysis by quadrupole ion trap mass spectrometry

Recent advances in phosphopeptide enrichment prior to mass spectrometric analysis show genuine promise for characterization of phosphoproteomes. Tandem mass spectrometry of phosphopeptide ions, using collision-activated dissociation (CAD), often produces product ions dominated by the neutral loss of phosphoric acid. Here we describe a novel method, termed Pseudo MS(n), for phosphopeptide ion dissociation in quadrupole ion trap mass spectrometers. The method induces collisional activation of product ions, those resulting from neutral loss(es) of phosphoric acid, following activation of the precursor ion. Thus, the principal neutral loss product ions are converted into a variety of structurally informative species. Since product ions from both the original precursor activation and all subsequent neutral loss product activations are simultaneously stored, the method generates a "composite" spectrum containing fragments derived from multiple precursors. In comparison to analysis by conventional MS/MS (CAD), Pseudo MS(n) shows improved phosphopeptide ion dissociation for 7 out of 10 synthetic phosphopeptides, as judged by an automated search algorithm (TurboSEQUEST). A similar overall improvement was observed upon application of Pseudo MS(n) to peptides generated by enzymatic digestion of a single phosphoprotein. Finally, when applied to a complex phosphopeptide mixture, several phosphopeptides mis-assigned by TurboSEQUEST under the conventional CAD approach were successfully identified after analysis by Pseudo MS(n).     

Formation of droplets of alternating composition in microfluidic channels and applications to indexing of concentrations in droplet-based assays

For screening the conditions for a reaction by using droplets (or plugs) as microreactors, the composition of the droplets must be indexed. Indexing here refers to measuring the concentration of a solute by addition of a marker, either internal or external. Indexing may be performed by forming droplet pairs, where in each pair the first droplet is used to conduct the reaction, and the second droplet is used to index the composition of the first droplet. This paper characterizes a method for creating droplet pairs by generating alternating droplets, of two sets of aqueous solutions in a flow of immiscible carrier fluid within PDMS and glass microfluidic channels. The paper also demonstrates that the technique can be used to index the composition of the droplets, and this application is illustrated by screening conditions of protein crystallization. The fluid properties required to form the steady flow of the alternating droplets in a microchannel were characterized as a function of the capillary number Ca and water fraction. Four regimes were observed. At the lowest values of Ca, the droplets of the two streams coalesced; at intermediate values of Ca the alternating droplets formed reliably. At even higher values of Ca, shear forces dominated and caused formation of droplets that were smaller than the cross-sectional dimension of the channel; at the highest values of Ca, coflowing laminar streams of the two immiscible fluids formed. In addition to screening of protein crystallization conditions, understanding of the fluid flow in this system may extend this indexing approach to other chemical and biological assays performed on a microfluidic chip.     

Experimental techniques using optically enabled ring oscillators

We present a method for characterizing transceiver performance in parallel optical data links. By establishing a bidirectional link between two optically enabled chips, the conditions for a ring oscillator are made possible. We propose this technique as a means of measuring the sensitivity of transceiver latency to controlled variables such as temperature, optical output power, supply voltage, and device misalignment. This method is noninvasive and independent of the packaging, circuit topology, and optical medium used. The technique is demonstrated experimentally, and results are compared with a simulation.     

Evaluation of several modifications of an ecometric technique for assessment of media performance

Recovery of Listeria monocytogenes 101M, Jonesia denitrificans, salmonellae, and Pediococcus sp. NRRL B-2354 across nine media was evaluated with three modified versions of an ecometric method. Two approaches involved the use of broth cultures (10(8) to 10(9) CFU/ml) of individual strains and either large (10-microl) or small (1-microl) presterilized plastic loops. The third approach involved precultured slants and the inoculation of media with presterilized plastic inoculating needles (10(4) CFU per needle). Absolute growth indices (AGIs) were compared. No significant differences (P < 0.05) between methods were found when tryptic soy agar supplemented with 0.6% yeast extract (TSAYE) was used for the recovery of L. monocytogenes, J. denitrificans, Pediococcus sp. NRRL B-2354, and Salmonella spp. However, the small loop-broth technique recovered significantly fewer Salmonella enterica Typhimurium DT104 and Salmonella Senftenberg 775W cells than the other two techniques did. The performance of each individual bacterial strain on each of nine media was assayed. The recovery of L. monocytogenes was excellent (AGI > 4.8) with TSAYE, PALCAM, modified Oxford medium (MOX), and Baird-Parker agar and slight with modified PRAB (AGI = 0.4) and deMan Rogosa Sharpe (MRS) agar (< 0.1), and the organism was not recovered with the remaining media (modified lysine iron agar [MLIA], xylose lysine desoxycholate [XLD] agar, and xylose lysine tergitol 4 [XLT4] agar). The recovery of J. denitrificans with TSAYE and MOX was excellent, significantly better than that achieved with PALCAM (AGI = 3.0), but the organism was not recovered with Baird-Parker agar or with the other media tested. The recovery of Pediococcus sp. NRRL B-2354 was excellent with TSAYE and modified PRAB medium > Baird-Parker agar > acidified MRS agar, but the organism was not recovered with any of the other media tested. The best recovery of S. enterica Typhimurium DT104 was achieved with TSAYE > MLIA > or = XLD agar > or = XLT4 agar > Baird-Parker > PALCAM, MOX, acidified MRS agar, modified PRAB, and MRS agar. The best recovery of Salmonella Senftenberg 775W was achieved with TSAYE, MLIA, and XLD agar > XLT4 agar, but the organism was not recovered with the other media evaluated.     

Fast-Fourier-domain delay line for in vivo optical coherence tomography with a polygonal scanner

We demonstrate in vivo optical coherence tomography using a Fourier-domain optical delay line constructed with a commercially available polygonal scanner. The 20-faceted polygonal mirror array, capable of scanning at rates up to 15 kHz, is implemented at 4 kHz to acquire 500 x 500 pixel images at 8 frames/s with a signal-to-noise ratio of 80 dB. Features of this delay line include scalability to high repetition rates, 98.6% linearity in group delay over 2 mm, and bandwidth support exceeding 150 nm. Images are obtained in an animal model (Xenopus laevis), and limitations due to phase-delay nonlinearity and polygon asymmetry are discussed.     

Genomic mining for complex disease traits with “random chemistry”

Our rapidly growing knowledge regarding genetic variation in the human genome offers great potential for understanding the genetic etiology of disease. This, in turn, could revolutionize detection, treatment, and in some cases prevention of disease. While genes for most of the rare monogenic diseases have already been discovered, most common diseases are complex traits, resulting from multiple gene–gene and gene-environment interactions. Detecting epistatic genetic interactions that predispose for disease is an important, but computationally daunting, task currently facing bioinformaticists. Here, we propose a new evolutionary approach that attempts to hill-climb from large sets of candidate epistatic genetic features to smaller sets, inspired by Kauffman’s “random chemistry” approach to detecting small auto-catalytic sets of molecules from within large sets. Although the algorithm is conceptually straightforward, its success hinges upon the creation of a fitness function able to discriminate large sets that contain subsets of interacting genetic features from those that don’t. Here, we employ an approximate and noisy fitness function based on the ReliefF data mining algorithm. We establish proof-of-concept using synthetic data sets, where individual features have no marginal effects. We show that the resulting algorithm can successfully detect epistatic pairs from up to 1,000 candidate single nucleotide polymorphisms in time that is linear in the size of the initial set, although success rate degrades as heritability declines. Research continues into seeking a more accurate fitness approximator for large sets and other algorithmic improvements that will enable us to extend the approach to larger data sets and to lower heritabilities.     

Whatever happened to "What might have been"? Regrets, happiness, and maturity.

Although lost opportunities and mistaken expectations are unpleasant to think and talk about, these experiences may have a role to play in personality development. Drawing on research using narratives of lost possible selves, the authors review the relations of regrettable experiences to 2 important and independent aspects of maturity, happiness and complexity. Thinking about a lost possible self is related to concurrent regrets, distress, and lowered well-being; however, elaborating on a lost possible self is related, concurrently, to complexity and predicts complexity, prospectively, over time. In this article, the authors describe the role that regrettable experiences have in promoting both happiness and complexity. Finally, expanding on previous work, the authors examine potential affordances of happy maturity and suggest psychological capacities that may promote happy maturity. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Extended Tunability in a Two-Chip VECSEL

We demonstrate a widely tunable vertical-external-cavity surface-emitting laser (VECSEL) with a W-shaped cavity, in which two VECSEL chips serve as fold mirrors and a birefringent filter is inserted at Brewster's angle. These two chips provide much higher modal gain and broader bandwidth of the gain than a single chip does, enhancing the VECSEL tuning range and reducing the variation of tunable output power with the tuned wavelength. This two-chip VECSEL configuration makes it possible to shape the modal gain spectra of the laser or to manipulate the tuning curve of the laser by two different chips with certain gain peak detuning (offset). Multiwatts high-brightness linearly polarized output with a tuning range of 33 nm is demonstrated in such a two-chip VECSEL     

Thermal Annealing and Propagation of Shockley Stacking Faults in 4H-SiC PiN Diodes

Stacking faults within 4H-SiC PiN diodes are known to be detrimental to device operation. Here, we present electroluminescence (EL) images of 4H-SiC PiN diodes providing evidence that electrically and optically stimulated Shockley stacking fault (SSF) propagation is a reversible process at temperatures as low as 210°C. Optical beam induced current (OBIC) images taken following complete optical stressing of a PiN diode and that lead to a small number of completely propagated SSFs provide evidence that such defects propagate across the n–/p+ interface and continue to grow throughout the p+ layer. These observations bring about questions regarding the validity of the currently accepted driving force mechanism for SSF propagation.