射孔孔眼中散射超声脉冲波的FEM模拟

采用有限元素法 ,分别数值计算了平底孔道、台阶式孔道和尖劈状孔道等 3种孔眼模型中不同中心频率 (10 0 k Hz、5 0 0 k Hz、1MHz)的散射超声脉冲波。计算结果表明 ,无论选用哪一种孔底模型 ,均可以得到较为明显的对应于孔底的声波信号。但是 ,孔道越不规则 ,使用的超声信号的主频越高 ,则孔底信号越差。为了兼顾孔底信号质量和信号采集、传输的代价 ,在未来的检测仪器中应采用尽可能低的测量频率 (低于 5 0 0 k Hz)     

PTA装置压力离心机冲洗新技术

分析了仪征化纤PTA装置压力离心机运转效果不佳的原因,提出解决方案,改造实施后取得了很好的效果。     

Skeletal Isomerization and Inter—molecular Hydrogen Transfer Reactions in Catalytic Cracking

Bimolecular hydrogen transfer and skeletal isomerization the important secondary reac-tions among catalytic cracking reactions,which affect product yield distribution and product quality,Catalyst properties and operating parameters have great impact on bimolecular hydrogen transfer and skeletal isomerization reactions .Bimolecular hydrogen transfer activity and skeletal isomrization activity of USY-containing catalysts are higher thn that of ZSM-5-containing catalyst.Coke deposition on the active sites of catalyst may suppress bimolecular hydrogen transfer activity and skeletal isomer-ization activity of catlys in different degrees.Short raction time causes a decrease of hydrogen trans-fer reaction,but and increase of skeletal isomerization reaction compared to cracking reaction in catalytic cracking process.     

假钞的公众识别方法

一、假钞公众识别的必要性马克思在《资本论》中有一段名言：“一旦有适当的利润，资本就胆大起来。如果有10%的利润，它就保证到处使用。有20%的利润，它就活跃起来。有50%的利润，它就铤而走险。为了100%的利润，它就敢践踏一切人间法律。有300%的利润，它就敢犯任何罪行，甚至冒着绞首的危险。”伪造货币“创造”的利润之巨不言而喻，而其危害性也人所共知。轻者给个人造成损失，特别是经济损失。重者扰乱金融秩序，影响社会的稳定。在世界范围内，所有国家都将伪造货币视为严重犯罪，对伪造者处以极刑。对普通大众而言，了解假钞的公众…     

高层建筑物整体形变的GPS监测

利用GPS观测数据 ,进行高层建筑物的整体形变监测模型和方法的研究是一项重要的工作。本文针对高层建筑物监测环境及其对监测快速、高精度的要求 ,尝试性地提出了高层建筑物整体形变模型 ,说明了模型应用要求和特点 ,详细给出了针对该模型的GPS监测方案 ,并用实例说明了模型和方案的实施步骤 ,实例分析得出了有益结论。     

万家寨引黄工程北干线输水损失分析

万家寨引黄工程北干线系统输水损失，是关乎输水运行成本和水资源有效利用的重要问题之一。由于各类建筑物施工方法，材料及工艺的差异。其输水损失差异较大，计算方法和计算参数各不相同，文章在对各类建筑物进行输水损失计算的基础上，分析了不同类型建筑物的输水损失特点，提出了减少水量损失的建议和设想。     

深基坑支护结构计算的有限元方法

针对软土地基的特性，本文提出了考虑土体抗力释放与结构模型随施工过程改变的新杆系有限元法，并 编制了求解支护结构内力与变形的计算程序，通过对事例分析．计算结果与实际情况非常吻合，证明了该方法的合理 性。     

A concise process technology for 3-D suspended radio frequency micro-inductors on silicon substrate

In this letter, a concise process technology is proposed for the first time to enable the fabrication of good quality three-dimensional (3-D) suspended radio frequency (RF) micro-inductors on bulk silicon, without utilizing the lithography process on sidewall and trench-bottom patterning. Samples were fabricated to demonstrate the applicability of the proposed process technology.     

1/f Noise separated from white noise with wavelet denoising

The low-frequency noise in the devices often appears to be a superposition of 1/f noise and white noise, which are induced by different physical mechanisms or microscopic defects. The separation of the two noises is necessary especially in the characterization of quality and reliability by means of noise measurement. The traditional separation method is usually used in frequency domain with limited frequency range, and the estimated value of exponent index γ for 1/f^γ noise has considerable error when the ratio of 1/f noise and white noise is smaller than 20 dB. In this paper, based on wavelet denoising theory, a new method is proposed to separate 1/f^γ noise from white noise in time domain and can be used to estimate γ values with much better accuracy even if the ratio of 1/f noise to white noise in low enough.     

改进尿素包装工艺 不断提高产品质量

通过对尿素包装工艺的不断改进，提高了尿素粒度、减少粉尘含量，效果明显。