Minimization of shaft oscillations by fuzzy controlled SMES considering time delay

This paper analyzes the effect of fuzzy logic-controlled superconductive magnetic energy storage (SMES) on minimizing shaft torsional oscillations of synchronous generators in a multi-machine power system. The proposed fuzzy logic controller has been designed in a very simple way considering only one input variable and one output variable. The time derivative of the total kinetic energy deviation (TKED) of the synchronous generators is used as the global input to the fuzzy controller for SMES switching. The influence of time delay associated with the global input calculation of the fuzzy controller on minimizing shaft torsional oscillations is investigated. Global positioning system (GPS) is proposed for the practical implementation of the calculation of the global input to the fuzzy controller. Simulation results of a balanced fault at different points in a multi-machine power system show that the proposed SMES can minimize the shaft torsional oscillations of synchronous generators well. Moreover, the time delay has an influence on the performance of fuzzy controlled SMES to minimize shaft torsional oscillations. However, even though the performance of fuzzy controlled SMES is somewhat effected by the communication delay, it is clear from the simulation responses that the fuzzy logic-controlled SMES considering typical communication delays can minimize the shaft torsional oscillations of synchronous generators well.     

Amorphous nanosilicas induce consumptive coagulopathy after systemic exposure

We previously reported that well-dispersed amorphous nanosilicas with particle size 70 nm (nSP70) penetrate skin and produce systemic exposure after topical application. These findings underscore the need to examine biological effects after systemic exposure to nanosilicas. The present study was designed to examine the biological effects. BALB/c mice were intravenously injected with amorphous nanosilicas of sizes 70, 100, 300, 1000 nm and then assessed for survival, blood biochemistry, and coagulation. As a result, injection of nSP70 caused fatal toxicity, liver damage, and platelet depletion, suggesting that nSP70 caused consumptive coagulopathy. Additionally, nSP70 exerts procoagulant activity in vitro associated with an increase in specific surface area, which increases as diameter reduces. In contrast, nSP70-mediated procoagulant activity was absent in factor XII-deficient plasma. Collectively, we revealed that interaction between nSP70 and intrinsic coagulation factors such as factor XII, were deeply related to nSP70-induced harmful effects. In other words, it is suggested that if interaction between nSP70 and coagulation factors can be suppressed, nSP70-induced harmful effects may be avoided. These results would provide useful information for ensuring the safety of nanomaterials (NMs) and open new frontiers in biological fields by the use of NMs.     

Spectroelectrochemical reflection studies of gold nano-rod array membrane

Gold nano-rod array membranes (Au-NRM) were prepared by modification of the template method. A simple two-electrode device was assembled by holding an electrolyte solution between the Au-NRM and a transparent electrode. Small reflectance changes (less than 2%) in the visible band were induced on the Au-NRM surface by applying a DC voltage to the device. These changes could be visually observed. It was found based on a further evaluation that the reflectance changes responded very fast (less than 100 ms) to the DC voltage application, and were stable during the switching repetition (over 5000 times). When the cyclic scanning of the applied voltage to the device was carried out between -1.5 V and +1.5 V, the reflectance changes were increased over +1.0 V (-1.0 V). It was suggested from these experimental results that the reflectance changes were attributed to the surface oxidation and the deformation or mechanical motion of the Au nano-rod.     

Simultaneous visualization of oxygen distribution and water blockages in an operating triple-serpentine polymer electrolyte fuel cell

Visualization inside polymer electrolyte fuel cells (PEFCs) is important for elucidating reaction distributions to improve the performance and durability of the cells. An O₂-sensitive porphyrin luminescent dye film was used to visualize oxygen partial pressures and water blockages simultaneously in triple-serpentine gas flow channels in an operating PEFC. Water droplets formed near the exit of a gas-flow channel lowered the oxygen partial pressure noticeably over the channel by blocking air flow near the entrance. Meanwhile, air was continuously supplied from the other channels through the gas diffusion layer, thus allowing power to be generated in the blocked channel. With water blockages, however, the catalyst layer under the channel became flooded by the water produced during the reaction, and the flooded state continued to exist in the catalyst and/or porous layers, even after blowing the water droplet out, so that the power generation was lowered along the channel.     

Properties of Injectable Apatite-Forming Premixed Cements

Previous studies reported premixed calcium phosphate cements (CPCs) that were stable in the package and form hydroxyapatite (HA) as the product after exposure to an aqueous environment. These cements had setting times of greater than 60 min, which are too long to be useful for some clinical applications. The present study investigated properties of fast-setting HA-forming premixed CPCs that initially consisted of two separate premixed pastes: (1) finely ground (1.0 μm in median size) dicalcium phosphate anhydrous (DCPA) mixed with an aqueous NaH(2)PO(4) solution, 1.5 mol/L or 3.0 mol/L in concentration, and (2) tetracalcium phosphate consisting of combinations of particles of two different size distributions, 5 μm (TTCP5) and 17 μm (TTCP17) in median size, mixed with glycerin. Equal volume of Pastes 1 and 2 were injected with the use of atwo-barrel syringe fitted with a static mixer into sample molds. The molar Ca/P ratio of combined paste was approximately 1.5. Cements were characterized in terms of setting time (Gilmore needle), diametral tensile strength (DTS), and phase composition (powder x-ray diffraction, XRD). Setting times were found to range from (4.3 ± 0.6 to 68 ± 3) min (mean ± sd; n = 3), and 1-d and 7-d DTS values were from (0.89 ± 0.08 to 2.44 ± 0.16) MPa (mean ± sd; n = 5). Both the NaH(2)PO(4) concentration and TTCP particle size distribution had significant (p < 0.01) effects on setting time and DTS. Powder XRD analysis showed that low crystallinity HA and unreacted DCPA were present in the 1-day specimens, and the extent of HA formation increased with increasing amount of TTCP5 in the TTCP paste. CONCLUSION: Injectable HA-forming premixed CPCs with setting times from 4 to 70 min can be prepared by using DCPA and TTCP as the ingredients. Compared to the conventional powder liquid cements, these premixed CPCs have the advantages of being easy to use and having a range of hardening times.     

Synthesis of a fullerene/expanded graphite composite and its lubricating properties

A fullerene/expanded graphite composite, in which fullerene crystals were incorporated into the expanded graphite interspaces, was prepared by chemical and thermal treatments and its lubricating properties in commercial grease were investigated. Expanded graphite, which was synthesized from graphite by oxidizing by KMnO₄ in 98% H₂SO₄ containing NaNO₃ and by heating at 400 °C for 3 min, and fullerene were placed in a stainless steel tube, and were heated in a furnace under vacuum at 600 °C for 2 weeks. The fullerene/expanded graphite composite obtained was characterized by X-ray diffraction analysis (XRD), Fourier transform infrared (FT-IR) spectroscopy, and scanning electron microscopy (SEM). XRD and FT-IR analyses showed that crystalline fullerene was present in the material and SEM images confirmed that it existed in the expanded graphite interspaces. The composite was blended with a commercial grease, and its lubricating properties were investigated using a four-ball lubricant tester. These properties were evaluated by measuring the wear scar diameter and wear volume loss of the test ball. The combination of composite and grease provided a better lubricating performance than that of pure graphite and grease.     

表面活性剂在气/液界面上扩散控制的吸附动力学(英文)

For the diffusion-controlled adsorption, the expression of dynamic surface adsorption P（t） was ob- tained by solving the diffusion equation. Two cases, i.e. the short and long time limits, were mainly discussed in this paper. From the measured dynamic surface tension of aqueous surfactant sodium dodecyl sulfate （SDS） solutions at 25 ℃, the adsorption kinetics of SDS at air/solution interface was studied. It was proved that for both of the short and long time limits, the adsorption process of SDS was controlled by diffusion.     

Evaluation of the ATCA fast controller standard for ITER diagnostics

ITER project's long time span and the nature of the instrumentation and control (I&C) procurement procedures for the Plant Systems require that the ITER Organization defines and follows well recognized standards which are used both by the industry and in physics experiments. The ITER I&C standards are defined in the Plant Control Design Handbook (PCDH) [1]. The ITER Organization has selected PCI Express and Ethernet for IO intercommunication to be used for plant system instrumentation for fast controllers. The decision on the usage of serialized I/O bus protocols is based on the impressive performance and the commercial availability. The form factors that will be supported by CODAC include PXIe, MicroTCA, and AdvancedTCA platforms. While the PXIe form factor is already well established for instrumentation purposes through the PXI Systems Alliance (www.pxisa.org), the AdvancedTCA and MicroTCA platforms which were originally targeted for the telecommunications market (www.picmg.org) are currently optimized and specified for instrumentation use through the xTCA extensions for physics [2]. The objective of this study is the evaluation of an integrated ATCA controller design using only commercial components.     

Effect of elevated annealing temperature on the morphology, microstructure, conductivity and microwave absorption properties of phthalocyanine polymer

An aromatic, diether-linked phthalocyanine resin (Pc) was prepared from 4,4′-bis (3,4-dicyanophenoxy) biphenyl (BPh) and investigated for morphology, microstructure, dielectric, conductivity and microwave absorption properties at different annealing temperatures from 300 to 800 °C. The results showed that the annealing temperature could significantly change the morphology and microstructure of the Pc polymer, leading to the generation of carbon-Pc polymer composites, and enhance the microwave absorbing and electrical properties of the Pc polymer. The dramatic electrical and dielectric transition happened when the annealing condition was 550 °C 24 h. The conductivity of the samples exhibited a transition of electrical behavior from an insulator to semiconductor of approximately 10⁺² S/cm. Pc polymer exhibited excellent microwave absorption properties in the frequency range of 0.5–18.0 GHz after sintering process. The microwave absorption of the annealing Pc polymer can be mainly attributed to the dielectric loss rather than magnetic loss. The sample annealed at 500 °C 24 h had two strong microwave absorbing peaks and achieved a maximum absorbing value of ?44 dB around 10.7 and 17.5 GHz when the thickness was 3.0 mm. The novel carbon-Pc polymer composites were believed to have potential applications in the microwave absorbing area.