Mechanical and tribological behavior of alumina and alumina‐CNT reinforced hybrid unsaturated polyester composites

Micro‐ and nano‐scale wear behavior of alumina vis‐á‐vis alumina‐carbon nanotube‐reinforced hybrid composites has been studied. In comparison to the pristine alumina, the alumina‐carbon nanotube hybrid reinforcement resulted in reduced scratch depth and lower frictional coefficient. Addition of carbon nanotube has effectively modified the pristine alumina into a superior wear resistant filler. POLYM. COMPOS., 37:1577–1586, 2016. © 2014 Society of Plastics Engineers     

Effect of Ultrasonic Shot Peening on Microstructure and Mechanical Properties of High-Nitrogen Austenitic Stainless Steel

The effect of ultrasonic shot peening (USSP) was studied on microstructural modification and mechanical properties such as microhardness, yield strength, tensile strength, and low cycle fatigue (LCF) life of a nitrogen stabilized austenitic stainless steel, at room temperature. There was grain refinement up to nano scale in surface region of the shot peened specimens and the microhardness was increased markedly up to the depth of approximately 100 µm. There was insignificant increase in yield and tensile strength, but drastic reduction in LCF life, particularly at low strain amplitude, from USSP. The nominal increase in yield and tensile strength was due to grain refinement in the surface region and drastic fall in LCF life was due to surface cracking resulting from USSP.     

Time of flight (TOF) spectrometer for accurate measurement of mass and angular distribution of fission fragments in heavy ion induced fission reactions

The performance of a dual time of flight (TOF) spectrometer using two 24 cm×10 cm area X–Y position sensitive Multi-Wire Proportional Counters (MWPC) is reported. Good separation of compound nuclear fission channel from elastic, quasi-elastic and non-compound fission channels have been achieved. Time calibration of the spectrometer using a technique, dependent on the detector independence of the mass or kinetic energy distributions gave a three times better mass resolutions compared to the conventional calibration technique using elastically scattered projectiles in a heavy ion induced fission reaction. Detail experimental methods in determining fission fragment mass and angular distribution have been presented and discussed.     

Interesting aspects of the analysis of resistivity in Li irradiated Bi-2212

Differently heat treated and 55 MeV Li³⁺ beam irradiated Bi₂Sr₂Ca₁Cu₂O_8+δ (Bi-2212) high temperature superconductors have been studied from the analysis of resistivity in the normal state as well as near the superconducting transition. For all the unirradiated and irradiated samples the so-called linear temperature dependence of the normal state resistivity, in a wide temperature range, can well be understood within the variable range hopping (VRH) conduction scenario. Near and above the bulk superconducting transition, the fluctuation enhanced conductivity (paraconductivity) analysis shows a noteworthy modification of the conduction process due to radiation induced defects.     

Wear characteristics of ceramic cutting tools in machining steel

Some ceramic materials such as Al₂O₃ which have a high compressive strength, hardness and chemical stability came into use industrially in the middle of this century as powder metallurgy produced indexable cutting tool inserts. These early ceramic tools were inherently weak in tension, impact and dynamic loading owing to their low tensile strength, toughness and transverse rupture strength; because of this their application was limited to medium productivity operations and work materials of softer grades. However, the technology of ceramic cutting tools has made great strides in the last few years through substantial improvements in their strength, toughness and wear resistivity. These modern ceramic tools have found wide and economic applications in high production machining of both cast iron and steels.In this paper the constructional characteristics of some modern ceramic tools and their wear behaviour and overall performances in machining mild steel at both low and high speeds are presented. The comparative results obtained are reported and discussed.     

Bone tumors of the coracoid process of the scapula

Bone tumors of the coracoid process of the scapula are rare, and diagnosis and treatment often are delayed. The records of 18 patients with bone tumors of the coracoid process were reviewed. Histologic types included eight cases of ordinary chondrosarcoma, three cases of dedifferentiated chondrosarcoma, two cases of osteoid osteoma, and one case each of osteosarcoma, plasmacytoma, lymphoma, giant cell tumor, and aneurysmal bone cyst. All 18 patients had shoulder pain, and eight of them had been treated with steroid injections for nonneoplastic conditions. Radiologically, chondrosarcoma did not always show clear cortical destruction, and one giant cell tumor had features mimicking those of chondrosarcoma. Five patients (three with dedifferentiated chondrosarcoma, one with chondrosarcoma, one with plasmacytoma) died of disease. The coracoid process was the site with a markedly high proportion of chondrosarcomas. Bone tumors of the coracoid process may be difficult to detect on plain radiographs. In the patient with persistent shoulder pain unresponsive to the selected treatment, additional imaging studies should be considered to eliminate the possibility of a bone lesion.     

Outcome of hypertension management in Asian Americans

BACKGROUND: Ethnic and/or racial differences in drug response to antihypertensive agents have been recognized, yet the prescribing practices and the information on efficacy of various agents rely mainly on the response of whites to drugs. OBJECTIVES: To assess the management of hypertension in Asian Americans and to compare it with an age- and sex-matched group of white patients with hypertension. METHODS: The patients' medical records were used as the primary source of information for the data collection. The observational period was a 12-month window and included 200 patients of Asian origin with hypertension and 196 white patients with hypertension whose medical records were randomly selected. RESULTS: The study describes the pattern of use of antihypertensive agents and the differences in response to antihypertensive agents between Asian Americans and whites. The preferred antihypertensive agents in both Asian and white patients included monotherapy with either calcium channel blockers or angiotensin-converting enzyme inhibitors. However, medication changes, dose reduction, and the experience of side effects were all significantly more frequently recorded in Asian patients than in white patients (P < .001, P < .008, and P < .002, respectively). CONCLUSIONS: These findings are supportive of some previous reports on ethnic differences in drug response to antihypertensive agents. The findings also point to the need for further prospective studies on the outcome of hypertension management in Asian American patients.