Novel floating simulated inductors with wider operating-frequency ranges

In this paper, a number of simulated floating inductors (FIs) employing second-generation current conveyor (CCII), current-feedback operational amplifier (CFOA), differential voltage current conveyor (DVCC) and differential difference current conveyor (DDCC) are proposed. They employ only a grounded capacitor; accordingly, they are suitable for integrated circuit (IC) implementation. Some of the developed FI simulators demonstrate the feature of improved low-frequency performance while the other ones suffer from the Z/Y terminal parasitic resistors bringing extra series resistors to the inductances of the simulated FIs. Two novel methods for reducing/eliminating the unwanted series resistance in equivalent inductances of the FIs are developed, one of which is called the direct design technique accomplished by adjusting the resistive component/components of the FIs. The series resistors of the FIs affecting their low-frequency performance can be canceled by adding floating negative resistors in series, which is another method. Three of the presented FIs as examples are chosen in order to verify the developed method, perform their simulations and show their performance.     

Throughput Evaluation of Oversampled Receiver: An Example of WiMAX System

In this paper, we propose an oversampled WiMAX receiver as an attempt to improve throughput of WiMAX system. In communication, oversampling is a technique that a signal is sampled with a higher sampling frequency than its original bandwidth at the receiver side. Thus more signal sequences, which is received through different paths, may be obtained compare to system with conventional sampling. These additional sequences generate diversity. This study theoretically analyzes an oversampled wireless communication system in case of capacity with outage over Rayleigh distributed flat fading channel and presents throughput of the oversampled WiMAX receiver that obtained by simulation over a realistic channel model and by experimental tests. Since the performance of an oversampled system very much depends on the channel conditions, realistic channel model and experimental study are essential to exhibit realistic performance benchmarks. Theoretical analyzes, simulations and experimental results clearly show that the oversampled receiver significantly outperforms the spectrum efficiency of the communication system.     

CCII-based PID controllers employing grounded passive components

In this paper, both of current-mode and voltage-mode proportional plus integral plus derivative (PID) controllers employing the second-generation current conveyors (CCIIs) as active elements are developed. The presented novel PID controllers have grounded passive elements that do not need passive element matching, and realize independently adjustable PID parameters. Thus, it is easy to implement these PID controllers in integrated circuits. Several computer simulations are presented to demonstrate the behavior of these proposed PID controllers.     

Zr‐Doped Indium Oxide (IZRO) Transparent Electrodes for Perovskite‐Based Tandem Solar Cells

Parasitic absorption in transparent electrodes is one of the main roadblocks to enabling power conversion efficiencies (PCEs) for perovskite‐based tandem solar cells beyond 30%. To reduce such losses and maximize light coupling, the broadband transparency of such electrodes should be improved, especially at the front of the device. Here, the excellent properties of Zr‐doped indium oxide (IZRO) transparent electrodes for such applications, with improved near‐infrared (NIR) response, compared to conventional tin‐doped indium oxide (ITO) electrodes, are shown. Optimized IZRO films feature a very high electron mobility (up to ≈77 cm² V^?1 s^?1), enabling highly infrared transparent films with a very low sheet resistance (≈18 Ω □^?1 for annealed 100 nm films). For devices, this translates in a parasitic absorption of only ≈5% for IZRO within the solar spectrum (250–2500 nm range), to be compared with ≈10% for commercial ITO. Fundamentally, it is found that the high conductivity of annealed IZRO films is directly linked to promoted crystallinity of the indium oxide (In₂O₃) films due to Zr‐doping. Overall, on a four‐terminal perovskite/silicon tandem device level, an absolute 3.5 mA cm^?2 short‐circuit current improvement in silicon bottom cells is obtained by replacing commercial ITO electrodes with IZRO, resulting in improving the PCE from 23.3% to 26.2%.     

Vital parameters for high gamma-aminobutyric acid (GABA) production by an industrial soy sauce koji Aspergillus oryzae NSK in submerged-liquid fermentation

Food Science and Biotechnology - In submerged-liquid fermentation, seven key parameters were assessed using one-factor-at-a-time to obtain the highest GABA yield using an industrial soy sauce koji...     

Relationship among fecal coliforms and <Emphasis Type="Italic"> Escherichia coli </Emphasis>in various foods

For much of the twentieth century, coliform bacteria and especially Escherichia coli have been used as indicators of possible post-processing contamination and the presence of E. coli as an indicator of fecal contamination in foods. In this study, 500 foods in 10 different groups, mainly dairy products, delicatessen products, salads, spices, cream cakes and fresh fruit and vegetable samples, were analyzed for the natural contamination of fecal coliforms and E. coli by the standard most probable number (MPN) method. The difference between weighted means of fecal coliforms and E. coli counts were only 0.246 log₁₀ MPN/g-ml (MPN/gram for solid samples, and MPN/milliliter for liquids). Enumeration results were also evaluated by Pearson's correlation coefficient ( r), Cronbach's alpha (f) and determination coefficient ( r ²) analysis. According to results, although 33 samples contained only non- E. coli fecal coliforms, the results of reliability analyses indicated that fecal coliform counts and E. coli counts may be used interchangeably ( P <0.0001). It can be said that fecal coliform or, preferably E. coli analysis is sufficient for rapid routine determination of fecal contamination, at least for those food groups analyzed in this research.