Influence of Mg concentration on structural,morphological and optical properties of nanoceria

Nano crystalline pure and Mg doped ceriaparticles were synthesized by simple chemical co-precipitation method using cerium nitrate hexahydrate as a source material and magnesium nitrate as doping precursor at room temperature. The effect of doping were investigated by X-ray diffraction pattern(XRD), FT-Raman,fourier transform infrared spectroscopy(FTIR), Ultraviolet spectroscopy(UV), photoluminescence spectroscopy(PL), field emission scanning electron microscope(FESEM) and high resolution transmission electron microscopy with energy dispersive spectroscopy (HRTEM &EDS). The X-ray diffraction pattern and FT-Raman studies showed that the prepared samples were nano particulates with cubic fluorite structure. The XRD pattern analysis showed that the size of the particles ranged from 13 to 20?nm, however 4?wt% Mg doping results in reduction of particle size compared with other doping concentrations. The effects of Mg concentration on various structural parameters of the prepared samples were also determined. The slight blue shift observed upon doping in UV–Vis absorption region around 330–360nmrecorded for reduction in particle size. The FTIR unveils the presence of Metal oxygen bonds below 700?cm^?1in the prepared samples. All samples showed a broad emission band at 430?nm with linearly increasing intensity with respect to dopant concentrations. The Spherical morphology with weak agglomeration was identified through FESEM and HRTEM analysis. The elemental analysis of Ce, O and Mg were confirmed through EDS analysis.     

Moisture adsorption behaviour of esterified rubber wood (Hevea brasiliensis)

Hevea brasiliensis ) esterified with acetic anhydride, maleic anhydride and phthalic anhydride was studied for moisture adsorption behaviour. FTIR spectroscopic technique was used to analyse the chemical changes in the wood through the correspondent reactions. Spectra indicated increasing intensity of the C=O and C-O stretching bands, and reduction in O-H stretching vibrations that reflects formation of less hygroscopic ester bonds with hydroxyl groups of cell wall polymers. Moisture adsorption isotherms show low equilibrium moisture content in esterified wood at all relative humidity values as compared to a control. The adsorption data was analysed by applying Hailwood-Horrobin theory which separated the adsorbed water into hydrated water and dissolved water corresponding to mono-layer and multi-layer adsorption. Curve for M_h and M_s were similar in pattern for esterified wood and control with different magnitude. Low M_h and M_s in esterified wood indicate reduction in moisture adsorption sites. Inaccessible fraction of wood for water vapour was increased by 43%, 32% and 26% in acetic, maleic and phthalic anhydride treated wood, respectively, compared to the control. Acetic anhydride treatment was found most effective in reducing hygroscopicity of wood.

---

Hevea brasiliensis ) wurde verestert mit Anhydriden der Maleins?ure, Essigs?ure und Phtals?ure. Das Adsorptionsverhalten bei verschiedenen Feuchten wurde mit FTIR-Methoden untersucht, um die entsprechenden chemischen Abl?ufe zu erfassen. Intensivere C=O, und -C-O- Streckschwingungen sowie reduzierte OH-Schwingungen reflektieren die neu gebildeten, weniger hygroskopischen Esterbindungen. Bei allen modifizierten Proben ergaben sich niedrigere Gleichgewichtsfeuchten. Die Adsorptions-Isothermen wurden mit Hilfe der Hailwood-Horrobin Theorie analysiert, um adsorbiertes (M_h) und gel?stes (M_s) Wasser zu unterscheiden. Der Kurvenverlauf für M_h und M_s für modifiziertes und unbehandeltes Holz war qualitativ ?hnlich, und unterschied sich nur quantitativ. Geringe Werte für M_h und M_s zeigen eine Verringerung der m?glichen Adsorptionsstellen an. Der nicht zug?ngliche Anteil des Holzes, bezogen auf Kontrollproben, verringerte sich auf 43% (Acetanhydrid), 32% (Maleins?ureanhydrid) und 26% (Phthals?ureanhydrid). Acetanhydrid erwies sich als das effektivste Mittel, um die Hygroskopizit?t zu erniedrigen.

     

Space charge limited currents in chlorazole black E dye

Space-charge-limited-currents have been studied in Chlorazole Black E (CBE) dye to understand the current-voltage relationship and the nature and distribution of traps present in the dye. Three distinct regions of voltage-current characteristics have been observed probably for the first time. The results have been discussed on the basis of carrier injection theory. There are non-uniformly distributed deep as well as shallow traps.     

Oxidation of polycyclic aromatic hydrocarbons with hydrogen peroxide catalyzed by Iron(III)porphyrins

A variety of iron-metallated functional porphyrins have been synthesized and their catalytic activity to oxidize polycyclic aromatic hydrocarbons, (PAHs) using hydrogen peroxide as oxidant was investigated. It was found that iron-metallated porphyrins bearing strong electronegative groups at β-pyrrolic positions show an exceptionally high catalytic efficiency.     

A structural study on MFCl (M=Ca, Sr, Ba) and BaFX (X=Br, I)

Here we present the electronic band structure calculations of CaFCl, SrFCl, BaFCl, BaFBr and BaFI performed using tight binding linear muffin-tin orbital method. The calculated ground state properties namely the lattice parameters, bulk moduli and the pressure-volume relations were found to be in good agreement with the experimental values. The electronic band structure of these compounds were calculated at ambient as well as in the high pressure region. The band gap values of these insulating systems were calculated and compared with available experimental values. At high pressure these compounds exhibit the interesting phenomenon of band overlap metallization.     

Biogenic synthesis and thermo‐magnetic study of highly porous carbon nanotubes

Nanomaterials synthesis using natural sources is the technology to up come with advanced materials through extracts of plant, microorganisms, poultry waste etc. In this study, the authors report the synthesis of porous carbon nanotubes using high‐temperature decomposition technique facilitated by cobalt salt using chicken fats, a poultry waste as a precursor. Since chicken fats contain fatty acids which can decompose into short hydrocarbon chains and cobalt can act as the catalyst. The formation of carbon nanotubes was confirmed by Raman spectra, peaks at 1580 and 1350.46 cm⁻¹ confirmed the graphite mode G‐band and structural imperfections defect mode D‐band, respectively. Transmission electron microscopy showed the formation of tube‐like structures. Nitrogen adsorption–desorption studies showed the high‐surface area of 418.1 m² g⁻¹ with an estimated pore diameter of 8.1 nm. Thermogravimetry analysis–derivative thermogravimetric analysis–differential thermal analysis showed the instant weight loss at 517°C attributed to the rapid combustion of nanotubes. A vibrating‐sample magnetometer showed the paramagnetic nature of the so‐formed carbon nanotubes formed.Inspec keywords: transmission electron microscopy, infrared spectra, nanomagnetics, pyrolysis, decomposition, adsorption, desorption, carbon nanotubes, differential thermal analysis, thermal analysis, nanofabrication, Raman spectra, X‐ray diffraction, scanning electron microscopy, paramagnetic materialsOther keywords: biogenic synthesis, highly porous carbon nanotubes, microorganisms, high‐temperature decomposition technique, cobalt salt, chicken fats, fatty acids, short hydrocarbon chains, Raman spectra, graphite mode G‐band, structural imperfections defect mode D‐band, transmission electron microscopy, paramagnetic nature, thermo‐magnetic properties, poultry waste, nitrogen adsorption‐desorption studies, thermogravimetry analysis, differential thermal analysis, carbon nanotubes, temperature 517.0 degC, C     

The removal of impurities from gray cotton fabric by atmospheric pressure plasma treatment and its characterization using ATR-FTIR spectroscopy

Gray cotton fabric shows hydrophobic characteristics due to presence of non-cellulosic impurities in outermost layers of cotton fiber. In the present study, atmospheric pressure plasma treatment for the removal of the non-cellulosic impurities from gray cotton fabric is investigated. Gray cotton fabric is treated with air dielectric barrier discharge at different time interval, and characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and scanning electron microscopy (SEM). Different species formed in plasma are identified using optical emission spectroscopy. The results clearly show that the plasma treatment improves wettability of gray cotton which is due to the removal of non-cellulosic impurities and due to the formation of polar carboxylate group. Removal of wax after plasma treatment is clearly reflected in ATR-FTIR spectra as disappearance of symmetric and asymmetric stretching of alkyl group at 2852.24 and 2917.81?cm^?1. Further, ATR-FTIR spectroscopy provides a fast and satisfactory assessment of removal of impurities from cotton surface when untreated and plasma-treated cotton fabric is exposed to HCl vapor and subsequently spectra are collected. We observed a strong carboxyl peak is induced at 1749?cm^?1 in case of untreated cotton. While for plasma-treated cotton fabrics substantial variation in the intensity of 1641 and 1749?cm^?1 peak is observed with increase in plasma treatment time. The morphological changes observed by SEM are in accordance with ATR-FTIR results. The results are compared with conventionally (alkaline scouring) treated cotton fabric. The study reveals that atmospheric pressure plasma has potential to become dry and environment friendly process to improve wettability of gray cotton fabric.     

Surface-modified maghemite as the cathode material for lithium batteries

The inorganic–organic hybrid maghemite (γ-Fe₂O₃)/polypyrrole (PPy) was synthesized and evaluated as cathode-active material for room temperature lithium batteries. The nanometer-sized core–shell structure of the hybrid consisting of the maghemite core with surface modified by PPy was evidenced from the morphological examination. The cathode fabricated with the as-prepared hybrid material delivered an initial discharge capacity of 233 mAh g⁻¹ and a reversible capacity of ∼62 mAh g⁻¹ after 50 charge–discharge cycles. A much higher performance with an initial discharge capacity of 378 mAh g⁻¹ and a reversible capacity of ∼100 mAh g⁻¹ was achieved with the cathode based on the segregated active material, which was obtained by subjecting the as-prepared hybrid material to an additional ball-milling process. The study demonstrates the promising lithium insertion characteristics of the nanometer-sized core–shell maghemite/PPy particles prepared under optimized conditions for application in secondary batteries.     

An EKV-based high voltage MOSFET model with improved mobility and drift model

An EKV-based high voltage MOSFET model is presented. The intrinsic channel model is derived based on the charge based EKV-formalism. An improved mobility model is used for the modeling of the intrinsic channel to improve the DC characteristics. The model uses second order dependence on the gate bias and an extra parameter for the smoothening of the saturation voltage of the intrinsic drain. An improved drift model [Chauhan YS, Anghel C, Krummenacher F, Ionescu AM, Declercq M, Gillon R, et al. A highly scalable high voltage MOSFET model. In: IEEE European solid-state device research conference (ESSDERC), September 2006. p. 270–3; Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] is used for the modeling of the drift region, which gives smoother transition on output characteristics and also models well the quasi-saturation region of high voltage MOSFETs. First, the model is validated on the numerical device simulation of the VDMOS transistor and then, on the measured characteristics of the SOI-LDMOS transistor. The accuracy of the model is better than our previous model [Chauhan YS, Anghel C, Krummenacher F, Maier C, Gillon R, Bakeroot B, et al. Scalable general high voltage MOSFET model including quasi-saturation and self-heating effect. Solid State Electron 2006;50(11–12):1801–13] especially in the quasi-saturation region of output characteristics.