Effects of ZnO and MoS<Subscript>2</Subscript> Solid Lubricants on Mechanical and Tribological Properties of M50-Steel-Based Composites at High Temperatures: Experimental and Simulation Study

Prospective beneficial effects of mixtures of temperature-adaptive solid lubricants (ZnO–MoS₂) on mechanical and tribological properties of M50 alloy steel were investigated at temperatures from 25 to 800 °C. ZnO and MoS₂ were mixed with M50 (designated as M) to create composites MZ (M50 steel plus ZnO), MM (M50 steel plus MoS₂), and MZM (M50 steel plus both additives). Sliding friction and wear experiments were performed at different temperatures using a pin-on-disk at a sliding speed of 0.2 m s^?1 and a load of 12 N. Silicon nitride and M50 steel were used as the pin materials. In order to understand the friction and wear behavior of composites, analyses of their surfaces were done using XRD, EPMA, FESEM, EDS line/mapping, and XPS tests. A dynamic simulation model based on the finite element method was built to simulate the different stresses on the contact pairs. Results elucidated that MZM attained the least friction (0.17), compared to M (0.40), MZ (0.26), or MM (0.29) at 800 °C. The increase in surface roughness of MZM due to sliding was reduced by 37.3% compared to that of MZ (11.9%) or MM (22.7%). The good lubricating behaviors were referred to the synergetic effects of ZnO, MoS₂, and formed lubricating components on worn surfaces.     

Genome size and base composition in Oryzaephilus surinamensis (Coleoptera: Sylvanidae) and differences between native (feral) and silo pest populations in Israel

In this study, flow cytometry was used for assessing and comparing the genome size (GS) and the whole genome base composition (AT/GC ratio) of the saw-toothed grain beetle Oryzaephilus surinamensis (L.). In addition, the presence and frequency of endosymbiotic Wolbachia bacteria was studied. The haploid GS was estimated to lie within the range of 151.5-154 Mbp in O. surinamensis, making it the smallest value of haploid GS known among beetles. Furthermore, it was found that in eight silo pest populations GS was significantly smaller than in eight feral (native) populations obtained from fallen oak acorns. The ability of O. surinamensis to colonize different habitats globally could be connected with an unusually AT-rich (for an invertebrate) genome (AT-base content ranging from 68 to 76%). Native (feral) populations of O. surinamensis appear to have genetically diverged from the storage-pest populations tested. Larvae of pest origin survived better than larvae of native (feral) origin under laboratory conditions, which resembled silo conditions more than natural habitats.     

Tunable Thermoelectric Performance in Porous Armchair Graphene Nanoribbons as a Function of Strain,Pore Morphology and Temperature

In this paper, the thermoelectric performance of porous armchair graphene nanoribbons under tensile and compressive strain is investigated as a function of pore morphology and temperature. For all the porous structures irrespective of their pore size, the performance improves at a compressive strain of 10%, while for tensile nature, the minimum cut-off strain required for improved thermoelectric figure of merit (ZT) shows an inverse relation with the pore size. In addition, optimal pore shape geometry can yield better performance, even at lower values of strain. Further analysis reveals that tensile strain is not able to improve the performance at low and intermediate temperatures of around 300 K, whereas tensile/compressive strain is effective in enhancing the performance of porous armchair graphene nanoribbons at higher temperatures. Furthermore, the structures are found to be more sensitive to compressive strain than the tensile one since the effect of compressive strain is found to improve ZT more significantly. Our analysis based on Non-Equilibrium Green’s function calculations suggests a possible route for tailoring the functionality of nanomaterials so as to achieve great potentials for thermoelectric applications at various temperatures.     

An integrated fine-grain runtime system for MPI

Fine-grain MPI (FG-MPI) extends the execution model of MPI to allow for interleaved execution of multiple concurrent MPI processes inside an OS-process. It provides a runtime that is integrated into the MPICH2 middleware and uses light-weight coroutines to implement an MPI-aware scheduler. In this paper we describe the FG-MPI runtime system and discuss the main design issues in its implementation. FG-MPI enables expression of function-level parallelism, which along with a runtime scheduler, can be used to simplify MPI programming and achieve performance without adding complexity to the program. As an example, we use FG-MPI to re-structure a typical use of non-blocking communication and show that the integrated scheduler relieves the programmer from scheduling computation and communication inside the application and brings the performance part outside of the program specification into the runtime.     

Microwave-Assisted Pretreatment of Sago Palm Bark

Three types of microwave-assisted diluted solvents were employed using 0.1 N H₂SO₄ (MSA), 0.1 N NaOH (MSH), and 0.01 N NaHCO₃ (MSB). These solvents were evaluated as possible pretreatment routes for sago palm bark (SPB) with their effects on the pretreated substrate. A variety of analyses, consisting of fiber analysis, energy dispersive X-ray spectroscopy (EDX), X-ray fluorescence spectrometer (XRF), X-ray powder diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscope (SEM), and high-performance liquid chromatography (HPLC), were performed to understand the pretreatment effects on the chemical and physical characteristics of SPB and pretreatment liquor. The thermal analysis has revealed that higher hemicellulose degradation was also found in MSA pretreatment. In the analyses of the pretreatment liquid for the extracted monomeric sugar, a higher amount of glucose was found (9 mg/g) using MSH pretreatment and the highest xylose level was found (4 mg/g) using MSA pretreatment. The analysis of the formation of inhibitors has shown that acetic acid was only found in the MSH pretreatment.     

The gray level aura matrices for textured image segmentation

Inspired by an intuitive analogy that exists between the gray level textures and the miscibility in the multiphase fluids, the aura concept was developed from set theory tools in order to modeling the texture image. The gray level aura matrix (GLAM) has been then proposed to generalize the gray level cooccurrence matrix (GLCM) which remains very popular in the texture analysis. The GLAM indicates how much each gray level is present in the neighborhood of each other gray level. The neighborhood is defined by a structuring element as one used in mathematical morphology. The GLAM is mainly used and studied in synthesis and classification of textures framework but very few works are devoted to the segmentation. The aim of this paper is to exploit the GLAM for the segmentation of textured images. Experiments results over synthetic and real images show the efficiency of the GLAM. The influence of the shape and the size of the structuring element on the segmentation results are also studied.     

Viscosity estimation of triacylglycerols and of some vegetable oils, based on their triacylglycerol composition

The experimentally determined kinematic viscosities of simple triacylglycerols [trilaurin, trimyristin (MMM), tripalmitin (PPP), tristearin (SSS), triolein (OOO), and trilinolein (LiLiLi) were correlated to a modified Andrade-type equation. The constants for the modified equation were derived for each simple triacylglycerol. The method was also used to estimate the viscosity of mixed triacylglycerols [1,2-dimyristoyl-3-palmitoyl (MMP), 1,2-dioleoyl-3-palmitoyl (OOP), 1,2-dimyristoyl-3-oleoyl (MMO), and 1,2-dipalmitoyl-3-oleoyl (PPO)], binary triacylglycerol mixtures (PPO/OOP, PPP/SSS, and OOO/SSS of different portions), and three types of vegetable oils [refined, bleached, and deodorized palm oil; cocoa butter; and canola oil] by applying modified Kay’s rule utilizing the simple triacylglycerol constants derived earlier. In all cases, the estimated values for liquid viscosity were compared with experimental values determined in this work and with previous work from the literature. When applied to vegetable oils, the method requires knowledge of their triacylglycerol composition. Despite its simplicity, the method gives a reasonable estimate. The method may be used to predict the viscosity of different blends of vegetable oils, and the accuracy is expected to increase when more experimental data on simple triacylglycerols become available.     

Effect of Operational Parameters on Determination of Oxidative Stability Measured by Rancimat Method

Operational parameters of Rancimat, including sample weight (3, 6, 9 g), airflow rate (10, 15, 20 L/h) and temperature (110, 120, 130°C) were evaluated to determine their effects on oxidative stability index, temperature coefficient, Q10 number, and shelf life prediction of ghee (anhydrous milk fat). These parameters showed statistically significant effects on the oxidative stability index. It was observed that when the sample weight and airflow rate at a given temperature were at saturated air condition, the oxidative stability indexes showed no significant differences (p < 0). As the temperature increased, oxidative stability index decreased and average coefficient of variation was minimal at 120°C. The conditions under which the ghee sample was saturated with air and had a relatively lower oxidative stability index, was with sample weight of 6 g, temperature at 120°C and an airflow rate of 15 L/h. Temperature coefficient and Q10 number were independent of sample weight and air flow rate, however, they had a significant effect on shelf life prediction of ghee.     

Application of Semiochemicals to Assess the Biodiversity of Subcortical Insects following an Ecosystem Disturbance in a Sub-boreal Forest

From 2000 through 2003 we used semiochemical-baited traps in northeastern Minnesota, USA, to assess changes in assemblages of subcortical forest insects after a catastrophic wind storm in 1999 and subsequent (1999–2000) fuel-reduction activities (salvage-logging and prescribed-burning). We determined the regional efficacy of fifteen semiochemical blends (pheromones and kairomones) as attractants for target and non-target subcortical insect species (Coleoptera: Anthribidae, Buprestidae, Cerambycidae, Cleridae, Cucujidae, Curculionidae, Histeridae, Nemonychidae, Salpingidae, Scolytidae, Tenebrionidae, and Hymenoptera: Siricidae). During the four summers, we trapped 86,471 subcortical insects (143 species) in baited and unbaited Lindgren funnel traps, and 500 beetles (44 species) in baited and unbaited pitfall traps. We report 23 new state collection records of subcortical insects from Minnesota. Trap catches of subcortical insects were greatest in the wind-disturbed areas 2 years after the event, and declined thereafter. Similar trends were observed for subcortical insects in the burned areas. Both wind-disturbance and burning increased the subcortical insect species richness and diversity on the landscape. The subcortical insect species compositions of the salvaged and burned forest areas differed from those of the undisturbed and wind-disturbed areas. Trap catches of subcortical insects in response to semiochemical treatments also varied with year of sampling and land-area treatment. The greatest diversity of subcortical beetle species was in traps baited with attractants for the scolytids, Dendroctonus valens [(+)-α-pinene and (−)-β-pinene] and Dryocoetes spp. [exo-brevicomin and (−)-α-pinene], perhaps reflecting the generic nature of the baits. The most distinct species compositions were collected in response to the woodborer and Dendroctonus simplex baits, whereas the species compositions in traps with the D. valens and Dryocoetes spp. baits, and the unbaited funnel trap were the most similar. The variation in trap catch with time and across landscapes suggests that the responses of subcortical insects to semiochemicals are more complex than previously appreciated.