Different feeding and gustatory responses to ecdysone and 20-hydroxyecdysone by larvae of the silkworm,Bombyx mori

The feeding and gustatory responses to ecdysone and 20-hydroxyecdysone were investigated in the silkworm,Bombyx mori. 20-Hydroxyecdysone reduced feeding response strongly in fourth- and fifth-instar larvae, whereas ecdysone had no effect on feeding response. 20-Hydroxyecdysone stimulated the R receptor, the receptor to feeding deterrents, to a great degree. By contrast, ecdysone was much less effective for stimulating the R receptor. These results indicate that ecdysone and 20-hydroxyecdysone have different effects on feeding response due to different interactions with mouthpart chemoreceptors.     

高速气流冲击式粉体表面改性装置——HYBRIDIZATION系统及应用

利用高速气流冲击法进行粉体/粉体系表面改性技术,是迄今为止各种粉体材料开发中最为引人注目的技术之一。HYBRIDIZATION(下称HYB)系统是利用高速气流冲击法对微粉体进行干式/机械化处理,是使材料复合化的最实用的装置,可对各类有机物、无机物、金属等进行广泛组合,通用性很强,适用于许多行业领域。从本文所述的系统构成、型式,有关的典型球形化处理的运转特性,利用复合化高温粉体测定被处理粉体表面温度,利用颜料改变色调等的处理特点及该系统的适用性等(一部分是从已发表的学术论文及专利上摘录的),可以说明HYB系统的概况。     

Solubility of Si3N4 in Liquid SiO2

The nitrogen solubility in the SiO₂-rich liquid in the metastable binary SiO₂-Si₃N₄ system has been determined by analytical TEM to be 1%–4% of N/(O + N) at 1973–2223 K. Analysis of the near edge structure of the electron energy loss peak indicates that nitrogen is incorporated into the silicate network rather than being present as molecular N₂. A regular solution model with a positive enthalpy of mixing for the liquid was used to match the data for the metastable solubility of N in the presence of crystalline Si₃N₄ and to adjust the computed phase diagram. The solubility of Si₃N₄ in fused SiO₂ is far less than reported in liquid silicates also containing Al, Mg, and/or Y. Apparently, these cations act as modifiers that break anion bridges in the silicate network and, thereby, allow further incorporation of Si₃N₄ without prohibitive amounts of network cross-linking. Finally, indications emerged regarding the diffuse nature of the Si₃N₄-SiO₂ interface that leads to amorphous regions of higher N content.     

Composite sheets with biodegradable polymers and paper,the effect of paper strengthening agents on strength enhancement,and an evaluation of biodegradability

Composite sheets composed of biodegradable polymers (BP) and paper were prepared, and their physical and biodegradable properties were investigated. The paper sheets were soaked in BP emulsions and cured at 100°C for 20 min. The wet strength of composite sheets with the same basis weight increased significantly with increasing BP content, although dry strength increased only moderately. A 0.5% addition of a common wet paper‐strengthening agent, poly(amidoamine‐epichlorohydrin) (PAE) resin, enhanced the wet strength, which reached 9.3 MPa, of composite sheets consisting of a BP : paper ratio of 20 : 80. Further enhancement was achieved by the addition of polyvinylamines (PVAm). The wet tensile strength of composite sheets consisting of BP and paper (20 : 80) increased by 27% with the addition of 0.2% PVAm and 0.5% PAE, whereas it was enhanced by only 3–4% with the addition of 0.7% PAE. The biodegradability of the composite sheets was somewhat retarded by the addition of PAE and PVAm. However, a 90% weight loss was observed 60 days after placing composite sheet samples in soil. A similar weight loss was observed after 45 days for composites without additives and after 30 days for base paper alone. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 861–866, 2005     

High-Temperature Fracture Mechanism of Low-Ca-Doped Silicon Nitride

High-purity Si₃N₄ (with 2.5 wt% glassy SiO₂) doped with 0 to 450 at.ppm of Ca was prepared as a model system to investigate the effects of grain-boundary segregants on fracture phenomenology at 1400°C. Subcritical crack-growth (SCG) resistance as well as creep resistance was degraded significantly by the presence of a small amount of Ca. The internal friction of the doped materials exhibited the superposition of a grain-boundary relaxation peak and a high-temperature background, and the apparent viscosity of the grain-boundary film was determined from the peak. Based on these experimental data, the fracture mechanism at 1400°C was divided into three regions: "brittle," SCG, and creep failure as a function of both external strain rate and Ca concentration, C _Ca. From the investigation of the C _Ca dependence of the critical strain rate for the transition from "brittle" to SCG fractures, the SCG phenomenon is suggested to be triggered by small-scale, grain-boundary sliding. The C _Ca dependence of "steady-state" creep rate was far from the theoretical dependence of diffusional creep via a solution-precipitation mechanism. The discrepancy was interpreted to be due to the presence of an impurity-insensitive creep component. This component may correspond to the lowest limit of the tensile creep rate in Si₃N₄ polycrystalline materials containing intergranular glassy-SiO₂ film.     

Activation of a Au/TiO2 Catalyst by Loading a Large Amount of Fe–Oxide: Oxidation of CO Enhanced by H2 and H2O

Catalytic activity of a 1 wt% Au/TiO₂ catalyst is markedly improved by loading a large amount of FeO_x, on which the oxidation of CO in excess H₂ is selectively promoted at temperature lower than 60 °C. Oxidation of CO with O₂ on the FeO_x/Au/TiO₂ catalyst is markedly enhanced by H₂, and H₂O moisture also enhances the oxidation of CO but its effect is not so large as the promotion by H₂. We deduced that activation of Au/TiO₂ catalyst by loading FeO_x is not caused by the size effect of Au particles but a new reaction path via hydroxyl carbonyl intermediate is responsible for the superior activity of the FeO_x/Au/TiO₂ catalyst.     

Rapid Quenching Technique Using Thermal-Image Furnace for Glass Preparation

A new technique combining a thermal-image furnace and a twin roller is described for quenching the melt to form glass. The technique was applied to the simple system Li₂O-SiO₂, since its fundamental parameters in the estimation of critical cooling rate are available. Glass flakes were obtained in the composition Li₄SiO₄, for which a very large critical cooling rate (∼10⁹ K·s⁻¹) was needed for glass formation.     

Effect of perchloric acid on the molecular weight and yield of poly-THF

Polytetramethylene glycol (molecular weight range 1000–8000) was prepared by the polymerization of tetrahydrofuran (THF) using a binary catalyst system of fuming sulfuric acid and perchloric acid. When 28% fuming sulfuric acid alone was used as the catalyst, the average molecular weight of polymer was low, the maximum value being 1000–1100. By the combination of fuming sulfuric acid with a small amount of perchloric acid, the average molecular weight of the polymer was increased to about 8000. Furthermore, the molecular weight was readily controlled in the range of 1000 to 8000 by varying the amount of the binary catalyst.     

Computer-aided reaction system synthesis based on structured process energy-exergy-flow diagram

A computerized thermodynamics-oriented procedure for reaction system synthesis is proposed. First, hierarchy structure of chemical reactions is discussed and the reaction system is categorized into three types; (1) combination with a heat source or sink, (2) combination with a reaction donor, and (3) decomposition of target reaction into subtargets. Then, the algorithm to find subtarget reactions and/or donor reactions is presented.