Phase change materials,their synthesis and application in textiles—a review

Phase change materials (PCMs) are widely being used in thermal energy storage systems for solar engineering, building materials, heat pumps, spacecraft, and in textile field especially smart and technical textiles. There are large numbers of organic and inorganic PCMs that possess a wide range of melting and solidifying temperature which attracts researcher’s attention for their applications in different fields. This review paper summarizes the investigation and analysis of the available organic and inorganic PCMs, different encapsulating techniques, characterization techniques, incorporation into fiber and pad application on textiles with practical applications in the field of smart textiles.     

Micro‐morphological,environmental and phytochemical investigation of herbal medicines by using LM and SEM: A quality control tool

The use of quality control tool for authentication of Jadwar (Delphinium denudatum Wall. ex Hook.f. & Thomson), a folk herbal drug used for the treatment of different ailments, was studied. People face problems of adulteration for this drug at global, regional, national and local levels. Two different plant species are commercially marketed in the Indo‐Pak Subcontinent under the same trade name of Jadwar. One is D. denudatum Wall. ex Hook.f. & Thomson and the other is Aconitum heterophyllum Wall. ex Royle. To focus on this problem, a marketable available drug sample of Jadwar was authenticated by using basic microscopy tools (LM) and advanced chemo‐taxonomic markers. Authentication, quality and standardization of this drug was achieved using morphology, organoleptography, UV and IR analyses, scanning electron microscopy of pollen and anatomical investigations. The techniques used for authentication marked the clear difference between the studied plants. Microscopic studies, chemotaxonomic investigation and other techniques used in this project provided the basis for the authentication of this species.     

A knowledge construction methodology to automate case-based learning using clinical documents

The case-based learning (CBL) approach has gained attention in medical education as an alternative to traditional learning methodology. However, current CBL systems do not facilitate and provide computer-based domain knowledge to medical students for solving real-world clinical cases during CBL practice. To automate CBL, clinical documents are beneficial for constructing domain knowledge. In the literature, most systems and methodologies require a knowledge engineer to construct machine-readable knowledge. Keeping in view these facts, we present a knowledge construction methodology (KCM-CD) to construct domain knowledge ontology (i.e., structured declarative knowledge) from unstructured text in a systematic way using artificial intelligence techniques, with minimum intervention from a knowledge engineer. To utilize the strength of humans and computers, and to realize the KCM-CD methodology, an interactive case-based learning system(iCBLS) was developed. Finally, the developed ontological model was evaluated to evaluate the quality of domain knowledge in terms of coherence measure. The results showed that the overall domain model has positive coherence values, indicating that all words in each branch of the domain ontology are correlated with each other and the quality of the developed model is acceptable.     

Model-based design verification for embedded systems through SVOCL: an OCL extension for SystemVerilog

Model Based System Engineering (MBSE) is a renowned approach in the context of embedded systems development. It is frequently used to deal with the structural and behavioral aspects of system design. However, the verification of system design is generally performed in isolation. It is particularly true in the context of assertion based verification. Consequently, there is a huge gap between system design and its verification that seriously effects the productivity and time-to market objectives. Therefore, in this research, we target to reduce this gap by exploiting the features of MBSE and SystemVerilog assertions (SVA’s). This article introduces a novel MBSE approach to model the design verification aspects of embedded systems, along with the system design (structural and behavioral aspects). We propose SystemVerilog in Object Constraint Language (SVOCL), an OCL temporal extension for SystemVerilog, to represent the design verification requirements by means of SVA’s. As a part of research, SVOCL transformation engine has been developed to generate SVA’s code in order to automate the design verification of embedded systems. The application of SVOCL has been validated through four case studies.     

Investigation of active slip-systems in some body-centered cubic metals

Tensile tests were performed on high-purity W and Mo polycrystals at room temperature for a range of axial strain-rates 2.1 × 10⁻⁴–2.1 × 10⁻² s⁻¹. The critical resolved shear stress (CRSS) data was analyzed by using the analytical formulation for the strain-rate dependence of the CRSS derived in the kink-pair nucleation (KPN) model of flow stress in crystals with high intrinsic lattice friction. On evaluation of various microscopic slip-parameters of the model, the active slip-system in both W and Mo polycrystals was identified as {110}〈111〉. This is in good agreement with that deduced from the published data on the temperature dependence of the CRSS of these crystals as well as from the observed slip-lines on the deformed crystals reported in the literature. Moreover, the available data on the temperature dependence of the CRSS of Mo, Nb, Fe, V, and K crystals were also analyzed within the framework of the KPN model of flow stress. Peierls mechanism was found to be responsible for the CRSS of these metals; the active slip-systems in refractory metals Mo, Nb, Fe, and V were {110}〈111〉 and {211}〈111〉 whereas that in alkali metal K was {321}〈111〉.     

Influence of accelerated curing on the compressive strength of polymer-modified concrete

In recent building practice, rapid construction is one of the principal requisites. Furthermore, in designing concrete structures, compressive strength is the most significant of all parameters. While 3-d and 7-d compressive strength reflects the strengths at early phases, the ultimate strength is paramount. An effort has been made in this study to develop mathematical models for predicting compressive strength of concrete incorporating ethylene vinyl acetate (EVA) at the later phases. Kolmogorov-Smirnov (KS) goodness-of-fit test was used to examine distribution of the data. The compressive strength of EVA-modified concrete was studied by incorporating various concentrations of EVA as an admixture and by testing at ages of 28, 56, 90, 120, 210, and 365 d. An accelerated compressive strength at 3.5 hours was considered as a reference strength on the basis of which all the specified strengths were predicted by means of linear regression fit. Based on the results of KS goodness-of-fit test, it was concluded that KS test statistics value (D) in each case was lower than the critical value 0.521 for a significance level of 0.05, which demonstrated that the data was normally distributed. Based on the results of compressive strength test, it was concluded that the strength of EVA-modified specimens increased at all ages and the optimum dosage of EVA was achieved at 16% concentration. Furthermore, it was concluded that predicted compressive strength values lies within a 6% difference from the actual strength values for all the mixes, which indicates the practicability of the regression equations. This research work may help in understanding the role of EVA as a viable material in polymer-based cement composites.     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.