An outcome of nuclear safety research in JAERI: case study for LOCA

An outcome of nuclear safety research (NSR) done by JAERI (Japan Atomic Energy Research Institute) was case studied by the bibliometric method. (1) For LOCA (loss-of-coolant accident) a domestic share of JAERI in monoclinic research paper was 63% at the past (20) 1978–1982 but was decreased to 40% at the present 1998–2002. For co-authored papers a domestic share between JAERI and PS (public sectors) was zero at past (20) but increased to 4% at the present. Research cooperation is active between Tokyo University and JAERI or between JAERI and Nagoya University. (2) It is revealed that LOCA outputs born by NSR-JAERI reflected partly to those of the Safety Licensing Guidelines, however, a share of NSR-JAERI could not determined due to the lack of necessary information in the Guideline.     

Gas entrainment rate and flow pattern of vertical plunging liquid jets

For a vertical plunging liquid jet system using various liquids, the effects of the operating conditions including the nozzle length-to-diameter ratio on the gas entrainment rate Q_g were evaluated experimentally. The differences in Q_g were related to the changes in the jet shape before plunging and the velocity of the plunging liquid jet at the point where the gas sheath breaks up. Empirical relationships were also presented to predict the maximum depth Z of bubbles entrained by the diffusing jet. The changes of Z were further discussed in terms of the downward liquid velocity distribution in the submerged two-phase region, which depends mainly on the size of entrained bubbles.     

Incorporation of a well-defined polyether side-chain into segmented poly(ether-urethane urea) and examination for blood-compatibility

A new method of introducing a hydrophilic polyether side chain into segmented polyurethane using a polypropylene oxide macromer with 1,3-diol at one chain-end, which behaves as chain extender, is described. In this procedure, a molecular-designed side-chain is incorporated quantitatively and directly into polyurethane biomedical elastomer. The design is also of interest to biomaterials in artificial organs.     

Interface state generation mechanism in n-MOSFET's

Uniform carrier injection into the channel of n-MOSFETs generates two types of interface states, depending on the oxide electric field: One is linearly proportional to the injected electron density (Type I), while the other shows a half-power dependence (Type II). Charge-pumping measurements in the temperature range of 77K and 263K show that the type I interface states are located in the mid-gap, while the type II interface states are uniformly distributed in wide energy range. Holes generated at the gate/SiO₂ interface or in the oxide are found to be responsible for the type I interface states, while hydrogen or hydrogen compounds diffusing from the interface cause the type II interface states.     

Fundamental study of high Q‐factor RF spiral inductor using carbonyl‐iron/epoxy composite magnetic core

In order to increase the Q‐factor of an RF spiral inductor used in the RF front‐end circuit of smartphone handsets, we introduced a carbonyl‐iron/epoxy composite magnetic core in the air‐core spiral inductor. The composite magnetic core, which was made by metal‐mask printing, consisted of carbonyl‐iron powder of 1.1 μm mean diameter and an epoxy resin matrix. We found that the 45 vol.% CIP composite magnetic core had a saturation magnetization of 0.9 T, relative permeability of ∼6, and loss tangent (tan δ) of ∼0.2 at 1 GHz. A two‐turn copper spiral inductor fabricated with the composite magnetic core filled only in the spacing between the conductor lines showed a clear Q‐factor increase of ∼29% compared to the air‐core spiral inductor at 1 GHz. Thus we obtained a substantial increase in the Q‐factor by the embedded composite magnetic core in the spacing between the conductor lines. The main reason for this is that the magnetic flux passing through the conductor lines was decreased by the magnetic core embedded in the spacing between conductor lines as a result of the magnetic flux passing mainly through the embedded magnetic core. Therefore, proximity effect is suppressed in the conductor line of the spiral coil. © 2016 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Role of protein kinase Cbeta in rhythmic contractions of human pregnant myometrium

To assess the role of protein kinase Cbeta (PKCbeta) in human myometrial contractions during pregnancy, we evaluated the effect of a PKCbeta inhibitor (LY333531) on the pregnant and nonpregnant myometrial contractions and compared the level of PKCbeta in the pregnant myometrium with that in the nonpregnant myometrium. The effects of LY333531 on the myometrial contractions were examined by measuring contractile activity (frequency and amplitude). PKCbeta in human myometrium was assessed at mRNA level using real-time PCR method. The characteristics of contractile activity were different between the pregnant and the nonpregnant myometrium. The amplitude of rhythmic contractions in the preterm and term myometrium was increased 2- to 2.5-fold when compared with that in the nonpregnant myometrium, but the frequency of rhythmic contractions was decreased by about half. LY333531 (10(-6) M) reduced the increased amplitude in the preterm and term myometrium by about 50%, and the inhibitory effects of LY333531 in the pregnant myometrium were significantly greater than that in the nonpregnant myometrium (about 50 vs 25%). However, the frequency in the pregnant and nonpregnant myometrium was not influenced by LY333531. Real-time PCR revealed a significant, five- to sevenfold increase in the expression of PKCbeta mRNA in the preterm and term myometrium when compared with the nonpregnant myometrium. These findings suggest that the increased amplitude of human myometrial contractions during pregnancy is related to the increased level of PKCbeta. A PKCbeta inhibitor may reduce preterm uterine contractions and prevent preterm delivery.     

Antioxidant Effects of Herbal Tea Leaves from Yacon (Smallanthus sonchifolius) on Multiple Free Radical and Reducing Power Assays,Especially on Different Superoxide Anion Radical Generation Systems

Yacon (Smallanthus sonchifolius), a native Andean plant, has been cultivated as a crop and locally used as a traditional folk medicine for the people suffering from diabetes and digestive/renal disorders. However, the medicinal properties of this plant and its processed foods have not been completely established. This study investigates the potent antioxidative effects of herbal tea leaves from yacon in different free radical models and a ferric reducing model. A hot‐water extract exhibited the highest yield of total polyphenol and scavenging effect on 1,1‐diphenyl‐2‐picryl hydrazyl (DPPH) radical among four extracts prepared with hot water, methanol, ethanol, and ethylacetate. In addition, a higher reducing power of the hot‐water extract was similarly demonstrated among these extracts. Varying concentrations of the hot‐water extract resulted in different scavenging activities in four synthetic free radical models: DPPH radical (EC₅₀ 28.1 μg/mL), 2,2′‐azinobis(3‐ethylbenzothiazoline‐6‐sulfonic acid) cation radical (EC₅₀ 23.7 μg/mL), galvinoxyl radical (EC₅₀ 3.06 μg/mL), and chlorpromazine cation radical (EC₅₀ 475 μg/mL). The yacon tea‐leaf extract further demonstrated superoxide anion (O₂^?) radical scavenging effects in the phenazine methosulfate‐NADH‐nitroblue tetrazolium (EC₅₀ 64.5 μg/mL) and xanthine oxidase assay systems (EC₅₀ 20.7 μg/mL). Subsequently, incubating human neutrophilic cells in the presence of the tea‐leaf extract could suppress the cellular O₂^? radical generation (IC₅₀ 65.7 μg/mL) in a phorbol 12‐myristate 13‐acetate‐activated cell model. These results support yacon tea leaves may be a good source of natural antioxidants for preventing O₂^? radical‐mediated disorders.     

Application of microalgae hydrolysate as a fermentation medium for microbial production of 2-pyrone 4,6-dicarboxylic acid

1. Download high-res image (309KB)
2. Download full-size image

     

Measurements of water distribution in through-plane direction of PEFC by using neutron radiography

Fuel gas (hydrogen gas) and oxidant gas (air) are supplied to a polymer electrolyte fuel cell (PEFC). Protons pass through the electrolyte membrane, and combine with oxygen to form water in the cathode reaction site. The generated water must be supplied appropriately to the membrane for proton conduction. On the other hand, the generated water may affect the fuel cell performances because of the blocking of oxygen from reaching the cathode reaction site. Therefore, water management in the PEFC is important, and water distribution during the operation in the through-plane direction has been of wide concern. In order to obtain the water distributions in a membrane electrode assembly (MEA) and a gas diffusion layer (GDL), a borescope system was newly employed using neutron radiography. The system could obtain the water distribution in the MEA and the GDL, and pixel size of 6.5 μm was achieved. Furthermore, the system was applied for a tilted converter system. The pixel of 1.0 μm at an angle of 81° was achieved, and improvement of the spatial resolution was confirmed.     

Solidification of Al2O3–YAG eutectic composites with off-metastable eutectic composition from undercooled melt produced by melting Al2O3–YAP eutectics

It has been reported that solidification of the Al₂O₃–YAG equilibrium eutectic structure follows melting of the Al₂O₃–YAP metastable eutectic structure. Since the exothermic heat due to solidification was consumed by the endothermic heat due to melting, a fine and uniform eutectic structure was obtained. However, the composition of the Al₂O₃–YAG eutectic structure is restricted to the metastable eutectic composition. In this paper, Al₂O₃–YAG eutectic compacts with an off-metastable eutectic composition were prepared by the addition of Al₂O₃ particles to Al₂O₃–YAP eutectic particles with diameters less than 20 μm. In compositions ranging from 18.5 mol%Y₂O₃ to 13.5 mol%Y₂O₃, dense Al₂O₃–YAG eutectic compacts were formed without any Al₂O₃ segregation. The flexural strength and the fracture toughness remained almost unchanged with the increase in the Al₂O₃ phase. The addition of Al₂O₃ particles to the Al₂O₃–YAP eutectic particles enabled the matrix phase to change from the YAG phase to the Al₂O₃ phase.