Ribotyping and a study of transmission of Staphylococcus aureus collected from food preparation facilities

Food poisoning from Staphylococcus aureus is sometimes caused by improper handling of food items in food preparation facilities. Prevention of contamination by employees is particularly important in facilities where a significant amount of food preparation is performed by hand. Some experiments have been performed to describe bacterial cross-contamination in the food preparation process, but there have been few studies of cross-contamination in actual food preparation facilities. Aiming to shed light on the transmission of S. aureus in food preparation facilities, this study collected samples of 66 strains of this bacterium from the fingers of food preparation staff, foodstuffs, prepared foods, cooking utensils, and cooking equipment and typed them with the ribotyping method. S. aureus from the same ribogroup was detected on the hands of a study participant, a faucet, knife, frying pan, and a salad, indicating that bacteria found on the hands of the study participant was transmitted to cooking utensils and prepared foods. Transmission (from a faucet to a frying pan handle) of bacteria by another person, a third party, was also detected.     

Cloning and heterologous expression of a beta-fructofuranosidase gene from Arthrobacter globiformis IFO 3062, and site-directed mutagenesis of the essential aspartic acid and glutamic acid of the active site

We have cloned the gene encoding a beta-fructofuranosidase from Arthrobacter globiformis IFO 3062, and subsequently, the gene was heterologously expressed in Escherichia coli. This beta-fructofuranosidase gene encodes a protein of 548 amino acid residues with a calculated molecular mass of 60,519 Da. We have examined the roles of three residues of A. globiformis IFO 3062 beta-fructofuranosidase by site-directed mutagenesis, and found that aspartic acid 130 and glutamic acid 392, which are two of the apparent catalytic residues, are essential for hydrolase activity. This study provides the first experimental evidence showing that these two amino acid residues of beta-fructofuranosidase play a critical role in hydrolyzing sucrose.     

Silica films with a single-crystalline mesoporous structure

Films of mesoporous materials attract broad interest because of their wide applicability in the fields of optics and electronics. Although many of these films have a regular local porous structure, the structural regularity has not been used practically yet because of difficulties in its control on macroscopic scales. Here, we demonstrate the preparation of mesoporous silica films whose porous structure can be described as a single crystal, that is, a long-range order of cage-like pores is maintained over centimetre scales. These films have a three-dimensional hexagonal (space group P6(3)/mmc) porous structure, and the in-plane arrangement of the pores is strictly controlled by a polymeric substrate surface that has been treated by rubbing. This new class of single-crystalline films with mesoscopic periodic structure is a significant breakthrough in bottom-up nanotechnology, and could lead to novel devices, for example, optics in a soft X-ray region, and quantum electronics.     

Fluorogenic derivatization reagents suitable for isolation and identification of cysteine-containing proteins utilizing high-performance liquid chromatography-tandem mass spectrometry

The fluorogenic derivatization reagents with a positive charge, 4-(dimethylaminoethylaminosulfonyl)-7-chloro-2,1,3-benzoxadiazole (DAABD-Cl) and 7-chloro-2,1,3-benzoxadiazole-4-sulfonylaminoethyltrimethylammonium chloride (TAABD-Cl), are proposed for use in proteomics studies. Following derivatization of protein mixtures with these reagents, a series of standard processes of isolation, digestion, and identification of the proteins were performed utilizing high-performance liquid chromatography-fluorescence detection and tandem mass spectrometry with the probability-based protein identification algorithm. Both DAABD and TAABD derivatives were detected fluorometrically at the femtomole level and showed more than 100-fold improvement in sensitivity compared to the underivatized original compounds with an electrospray ionization ion trap mass spectrometer analysis. The modification of the MASCOT database search system memorized with the fragment information of a DAABD-attached Cys residue allowed the identification of the proteolytic peptide fragments of the derivatized bovine serum albumin (BSA) with an estimated 38% sequence coverage of BSA. Utilizing DAABD-Cl as a derivatization reagent, identification of several proteins was also possible in a soluble extract of Caenorhabditis elegans (10 microg of protein). Consequently, for identification of proteins in the complex matrixes of proteins, DAABD-Cl could be a more appropriate reagent than ammonium 7-fluoro-2,1,3-benzoxadiazole-4-sulfonate as reported previously.     

Delivery of medical multimedia contents through the TCP/IP network using RealSystem

We developed a low cost, user-friendly multimedia delivery system, to provide medical lectures saved as multimedia contents to persons engaged in medicine. This system was created using the RealSystem package with the TCP/IP network. Users can review lectures and medical meeting presentations with video and audio through the Internet, whenever convenient. Each medical source of video and slide has been clearly displayed on a screen. Members of medical associations or medical students can easily review the most interesting parts of these files. This system is being used efficiently in distance learning and aids the diffusion of the latest information and technology to busy physicians and medical students.     

Simultaneous determination of five penicillins in muscle,liver and kidney from slaughtered animals using liquid chromatography coupled with electrospray ionization tandem mass spectrometry

A simple and rapid method for the simultaneous determination of five penicillins (ampicillin, penicillin G, penicillin V, oxacillin and cloxacillin) in muscle, liver and kidney tissues using high-performance liquid chromatography-electrospray tandem mass spectrometry (LC-ESI-MS/MS) was developed. Mass spectral acquisition was done in the negative ion mode by applying selected reaction monitoring (SRM). The five penicillins were extracted with water, and the extracted solution was cleaned up on a C18 cartridge. Phenethicillin was added as an internal standard, and the extract was diluted with water for injection into the LC-ESI-MS/MS. The recoveries of the five penicillins were in the range of 77.3-99.8% from muscle, liver and kidney fortified at 10-250 ng/g. The detection limits for ampicillin were 6 ng/g in muscle and kidney and 15 ng/g in liver. For penicillin G and penicillin V, the detection limits were 2 ng/g in muscle and kidney and 5 ng/g in liver. For oxacillin and cloxacillin, the detection limits were 4 ng/g in muscle and kidney and 10 ng/g in liver. Twenty-three muscle, fourteen liver and twenty-two kidney samples from the markets were analyzed by this method. No penicillins were detected in any sample.     

Temperature Dependence of the Velocity of Sound in Liquid Metals of Group XIV

The temperature dependences of the velocity of sound in liquid Pb, Sn, Ge, and Si have been measured by means of the pulse transmission technique over temperature ranges of 610–1078 K, 608–1463 K, 1215–1443 K, and 1723–1888 K, respectively. In both liquid Pb and Sn, the velocities of sound decrease linearly with increasing temperature, which is the same temperature dependence as shown in many other liquid metals. On the other hand, the velocities of sound in liquid Ge and Si exhibit anomalous temperature dependences. In Ge, the velocity of sound has a distinct maximum around 1280 K and decreases linearly at higher temperatures. In Si, the velocity of sound increases monotonically with increasing temperature in the temperature range investigated. It is considered that these results predict that the coordination numbers of liquid Ge and Si increase with increasing temperature.     

Response function estimation with fine energy bins for the energy-resolved computed tomography using a transXend detector

A new ‘transXend’ detector system has been developed for energy-resolved computed tomography (CT). It consists of several segmented detectors that measure X-rays as electric currents. Response functions of segmented detectors are estimated using component materials of a body under inspection to unfold X-ray spectra. To avoid material-dependent measurements, response functions inherent to segmented detectors are evaluated by Monte Carlo calculations. CT was performed for a phantom consisting of five resins and was analyzed by the estimated response functions. The linear attenuation coefficients for the five resins have excellent agreement with database values.     

Sensorless vector controlled converter for variable speed wind generation system using an induction generator

This paper proposed two types of speed sensorless converters that can control rotational speed and electric power. One is based on a slip frequency control system. The other is based on a vector control system. The rotational speed of the wind turbine is estimated with the phase voltage and phase current of the induction generator by the adaptive rotor flux observer. The estimated wind turbine rotational speed ω_r^est is used as the feedback of the speed control loop in the converter control system. Also, the estimated rotor flux ?_2d^est is used for the vector control. The simulation results confirm that both of them perform satisfactorily under the speed sensorless operation. The method based on the vector control system generates more electrical energy than does the method based on the slip frequency control system. © 2007 Wiley Periodicals, Inc. Electr Eng Jpn, 159(4): 62–75, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20323     

Externally resonated linear microvibromotor for microassembly

A new method for on-substrate fine positioning of microscale/mesoscale discrete components is presented, where component positions are finely adjusted using microlinear sliders and fixtures on the substrate. Each microlinear slider is actuated by vibratory impacts exerted by two pairs of microcantilever impacters. These microcantilever impacters are selectively resonated by shaking the entire substrate with a piezoelectric vibrator, requiring no need for built-in driving mechanisms such as electrostatic comb actuators, as reported previously. This selective resonance of the microcantilever impacters via an external vibration energy field provides with a very simple means of controlling forward and backward motion of the microlinear slider, facilitating assembly and disassembly of a microcomponent on a substrate. An analytical model of the device is derived in order to obtain, through the simulated annealing algorithm, an optimal design, which maximizes translation speed of the linear slider at desired external input frequencies. Prototypes of the externally resonated linear microvibromotor are fabricated using the three-layer polysilicon surface micromachining process provided by the Microelectronics Center of North Carolina, Research Triangle Park, NC, multiuser microelectromechanical processes service. These prototypes are tested for forward and backward motion via external vibration applied by an piezoelectric flexure vibrator, as well as the horizontal positioning and release of 500-μm-square polysilicon chips against a reference fixture element anchored to the substrate