Numerical simulation of the hydrogen storage with reaction heat recovery using metal hydride in the totalized hydrogen energy utilization system

Numerical simulation of a hydrogen storage tank of a Totalized Hydrogen Energy Utilization System (THEUS) for application to commercial buildings was done to verify the practicality of THEUS. THEUS consists of a fuel cell, water electrolyzer, hydrogen storage tank and their auxiliary machinery. The hydrogen storage tanks with metal hydrides for load leveling have been previously experimentally investigated as an important element of THEUS. A hydrogen storage tank with 50 kg AB5 type metal hydride was assembled to investigate the hydrogen-absorbing/desorbing process, which is exothermic/endothermic process. The goal of this tank is to recover the cold heat of the endothermic process for air conditioning, and thus improve the efficiency of THEUS. To verify the practical effectiveness of this improved system, we developed a numerical simulation code of hydrogen storage tank with metal hydride. The code was validated by comparing its results with experimental results. In this code the specific heat value of the upper and lower flanges of the hydrogen storage tank was adjusted to be equal to the thermal capacity of the entire tank. The simulation results reproduce well the experimental results.     

Evaluation of neutron nuclear data on platinum isotopes

Neutron nuclear data on 10 isotopes of platinum have been evaluated for the next version of Japanese Evaluated Nuclear Data Library general-purpose file in the energy region from 10^?5 eV to 20 MeV. Resolved resonance parameters of naturally occurring isotopes were taken from a compilation work, while unresolved resonance parameters were obtained by fitting to the total and capture cross sections calculated from nuclear models. A statistical model code was applied to evaluate cross sections above the resolved resonance region. Compound, pre-equilibrium and direct-reaction processes were considered for cross-section calculation. Coupled-channel optical model parameters were employed for the interaction between neutrons and nuclei. Giant-dipole and pygmy resonance parameters for E1 γ-ray transition from platinum isotopes were determined so as to reproduce measured γ-ray spectrum. The present results reproduce experimental data very well. The evaluated data are compiled into Evaluated Nuclear Data File formatted data files.     

Proposal of a concept of future oriented machine tools for advanced manufacturing systems

In order to satisfy the recent various consumers’?needs, an advanced manufacturing system will be required. So, the innovative concept of Future Oriented Machine Tools (FOMT), which consists of four function blocks to realize the advanced manufacturing system, is proposed. The four function blocks are Management, Prediction, Observation and Strategy, and intelligent manufacturing processes are realized by utilizing these function blocks. FOMT can make a significant contribution in four stages: design stage, production scheduling stage, machining stage and post-machining stage. In the design stage, the product information such as accuracy can be evaluated in CAD, considering the manufacturing ability concurrently. In the production scheduling stage, the product schedules can be generated automatically and flexibly for the various products. In the machining stage, cutting conditions adjusted autonomously according to the machining status and machining problems. In the post-machining stage, the machining know-how data are accumulated and stored for future production and human engineers. The feasibility of it, especially the machining stage, is discussed using the developed cutting process simulator called VMSim (virtual machining simulator) from the view points of cutting force, machining error and environmental burden (CO₂ emission).     

Surface potential measurement of organic photo-diode consisting of fullerene/copper phthalocyanine double layered device

We investigated the surface potential built across the electrode/fullerene (C₆₀) or copper phthalocyanine (CuPc) interface and C₆₀/CuPc interface as a function of the thickness of the semiconductor film in the dark condition and under illumination. The surface potential of C₆₀ on Au, Al and Mg changes negatively with the increment of film thickness and it saturates at − 0.25, − 1.0 and − 1.5 V within 20 nm. The Fermi level alignment at C₆₀/electrode interface is established within ∼ 20 nm from electrode, and very high electric field exists due to the displacement of negative electronic charges from electrode into C₆₀. On the other hand, the surface potential of CuPc on ITO changes to + 0.1 V, and the work functions of C₆₀ and CuPc were estimated as 5.0 eV and 4.7 eV. C₆₀ film also accepts electrons from CuPc at hetero-junction interface, and the Fermi-level alignment was again obtained at C₆₀/CuPc interface under illumination. The built-in potential of ca. 0.3 V formed at C₆₀/CuPc interface was considered as the origin of the reduction of open-circuit voltage in ITO/CuPc/C₆₀/Au device compared with the optimum value of 0.6 V. On the other hand, the very high electric field formed at C₆₀/Mg contact improved the photovoltaic properties.     

Confocal laser scanning microscopic analysis of ectopic sublingual gland‐like tissue inside the hamster submandibular gland

Based on its histochemical properties, the secretory portion of the hamster submandibular gland has been classified as seromucous cells. The presence of endogenous peroxidase (PO) reaction was shown in the nuclear envelope, cisternae of endoplasmic reticulum and Golgi apparatus. The 3,3′‐diaminobenzidene, tetrahydrochloride (DAB) method revealed bipartite secretory granules containing a PO‐positive dense core surrounded by a less dense halo in these cells. In the present investigation, serous and mucous‐like cells were found in resin‐embedded semi‐thin sections of the DAB‐reacted hamster submandibular gland. These sections were already on glass slides for routine light microscopic observations, therefore electron microscopic analysis could be unrealizable. We then used reflectance‐mode confocal laser scanning microscopy to visualize additional sites of PO activity as detected in these sections. Using this approach, we found mucous cells with PO activity‐negative secretory granules and seromucous cells with PO activity‐positive spot‐like secretory granules of the regular sublingual gland most frequently adjacent to the serous cells with typical electron‐dense secretory granules. These cells clearly differ from the seromucous cells with bipartite secretory granules and the granular duct cells with typical electron‐dense secretory granules of the hamster submandibular gland. Additionally, secretory endpieces of the ectopic sublingual gland‐like tissue empty into the duct of the hamster submandibular gland lobule. Thus, our findings suggest that a mass of sublingual gland tissue extends into the hamster submandibular gland during its development, and PO may be synthesized and secreted into the same duct. Microsc. Res. Tech. 76:1284–1291, 2013. © 2013 Wiley Periodicals, Inc.     

Quantitative evaluation of impedance perception characteristics of humans in the man-machine interface

We investigated impedance perception characteristics of humans in the man-machine interface. Sensibility or operational feel about physical properties of machine dynamics is obtained through perception process. We evaluated the impedance perception characteristics of humans who are operating a mechanical system, based on extended Scheffe’s subjective evaluation method in full consideration of the influence of impedance level, impedance difference, experiment order, individual difference and so on. Constant method based quantitative evaluation was adopted to investigate the influence of motion frequency and change of the impedance on human impedance perception characteristics. Experimental results indicate that humans perceive impedance of mechanical systems based on comparison process of the dynamical characteristics of the systems. The proposed method can be applied to quantify the design requirement of man-machine interface. The effectiveness of the proposed method is verified through experimental results.     

A life-cycle analysis on thin-film CdS/CdTe PV modules

Authors have evaluated the life cycle of a thin-film CdS/CdTe PV module to estimate the energy payback time (EPT) and the life-cycle CO₂ emissions of a residential rooftop PV system using the CdS/CdTe PV modules. The primary energy requirement for producing 1 m² of the CdS/CdTe PV module was similar to a-Si PV module at annual production scale of 100 MW. EPT was calculated at 1.7–1.1 yr, which was much shorter than the lifetime of the PV system and similar to that of a-Si PV modules. The life-cycle CO₂ emissions were also estimated at 14–9 g-C/kWh, which was less than that of electricity generated by utility companies.     

Electron Holography Studies on Narrow Magnetic Domain Walls Observed in a Heusler Alloy Ni50Mn25Al12.5Ga12.5

Peculiar magnetic domain walls produced in Heusler alloys, which have attracted renewed interest due to their potential application to actuators and spintronic devices, are studied here using electron holography. The observations reveal unexpectedly narrow magnetic domain walls, the width of which showed perfect agreement with that of the antiphase boundaries (APB, e.g., only 3 nm). While the results can be explained by the significant depression of ferromagnetism due to the local chemical disorder, the electron phase shift indicates that ferromagnetic correlation still remains in the APB region.