Graphene modified Nd/TiO2 photocatalyst for methyl orange degradation under visible light irradiation

A novel nanoscale GR–Nd/TiO₂ composite photocatalyst was synthesized by the hydrothermal method. Its crystal structure, surface morphology, chemical composition and optical properties were studied using XRD, TEM, and XPS, DRS and PL spectroscopy. It was found that graphene and neodymium modification shifts the absorption edge of TiO₂ to visible-light region. The results of photoluminescence (PL) emission spectra show that GR–Nd/TiO₂ composites possess better charge separation capability than do Nd/TiO₂ and pure TiO₂. The photocatalytic activity of prepared samples was investigated by degradation of methyl orange (MO) dye under visible light irradiation. The results show that the GR–Nd/TiO₂ composite can effectively photodegrade MO, showing an impressive photocatalytic activity enhancement over that of pure TiO₂. The enhanced photocatalytic activity of the composite catalyst might be attributed to the large adsorptivity of dyes, extended light absorption range and efficient charge separation due to Nd doping and graphene incorporation.     

Integration Concepts for the Fabrication of LTCC Structures

At the Keck Smart Materials Integration Laboratory at Penn State University, low-temperature co-fired ceramic (LTCC) material systems have been used to fabricate a number of devices for a variety of applications. This article presents an overview of the integration of the concepts and materials that we have used to achieve miniaturization and unique device function. Examples of microwave filters, metamaterial antennas, and a dielectrophoretic cell sorter will be presented, with emphasis on device modeling and design, prototype construction methods, and test results.     

Synthesis and characterization of novel curcumin based polyurethanes varying diisocyanates structure

In this research work, novel polyurethanes (PUs) based on blends of curcumin/1,4-butane diol (BDO) by varying the structure of diisocyanates were prepared following step growth polymerization. Structural study of blends and various diisocyanates based PU through Fourier Transform Infrared (FTIR) spectroscopy confirmed the incorporation of curcumin into the backbone of the PU. The scanning electron microscopic (SEM) study confirmed the well dispersion of incorporated curcumin and homogeneity of surface of synthesized samples. The SEM results also indicated that surface morphology of synthesized samples much dependent on diisocynates structure. Moreover SEM images inferred that phase separation is more pronounced in aromatic diisocyanate based PU. The anti-bacterial and anti-fungal tests were performed against different strains in order to determine the biocompatibility of the curcumin based PU. The antimicrobial activity results revealed that the material having aromatic diisocyanate are more biocompatible than the aliphatic diisocyanates in the PU structure. On the whole, this work is actually a step towards the generation of novel biocompatible materials preferably useful for biomedical applications.     

Silicon Application Enhances the Photosynthetic Pigments and Phenolic/Flavonoid Content by Modulating the Phenylpropanoid Pathway in Common Buckwheat under Aluminium Stress

Silicon - Silicon (Si) is very effective in the amelioration of heavy metal (HM) stress in different crop plants. This investigation was conducted to assess the protective role of Si in modulating...     

The effect of sodium polymethacrylate on the rheology of the positive paste and performance of the lead-acid battery

Due to its rheological properties, positive lead-acid battery paste can be difficult to spread on lead current collectors accurately and efficiently under industry machinery and setting. Sodium polymethacrylate dispersant was studied as an effective positive paste additive that could lower the yield stress of the paste without affecting paste density and battery performance. Under a four-blade vane rheometer setup, stress growth and oscillatory amplitude strain sweep experiments evaluated the rheological properties of positive paste with the addition of varying amounts of sodium polymethacrylate. Further, the electrochemical effects of sodium polymethacrylate were also evaluated in 2V batteries by testing positive active material utilization and cycle life.     

Immobilization Horseradish Peroxidase onto UiO-66-NH2 for Biodegradation of Organic Dyes

Enzymes are extensively used as catalyst in several fields of production such as chemistry, and pharmaceuticals owing to their selectivity, efficiency and environmentally friendliness. However, their applications are often hindered due to their insufficient stability and difficulties in re-use. As a member of porous crystalline materials, metal organic frameworks are a promising enzyme carrier due to their multi-functional pore surfaces and robustness in variety of harsh conditions. In this study, the horseradish peroxidase (HRP) enzyme was immobilized onto UiO-66-NH₂ (Universitetet i Oslo) by a facile incubation method at the room temperature to improve the stability and reusability of enzyme. The prepared HRP@UiO-66-NH₂ bio-composite was characterized by using FT-IR, XRD and SEM. The crystal structure of MOF was well-preserved after enzyme immobilization. A colorimetric assay for enzyme activity after released from UiO-66-NH₂ has been employed based on the catalytic oxidation of phenol coupled with 4-aminoantipyrine. The robustness and activity of immobilized enzyme after released from UiO-66-NH₂ were investigated by biodegradation of methyl orange (MO) and methylene blue (MB) with several parameters such as pH, temperature, the dosage of H₂O₂ and the dye concentration with comparison to its free form. The optimum condition for dye degradation was obtained at basic conditions. The immobilized enzyme maintained its activity at elevated temperature while free enzyme lost its activity at the same conditions, attributed to the armoring effect of UiO-66-NH₂. According to the results of studied various parameters, MO and MB were biodegraded to 60% and 45%, respectively, within 60 min with the optimum conditions at pH 9 and 50 °C at a H₂O₂ dosage of 3%. The superior pH tolerance and stability suggest potential of UiO-66-NH₂ immobilized peroxidase enzyme in industrial applications.

     

Calculation of Detonation Properties of Gaseous Explosives Using Generalized Reduced Gradient Nonlinear Optimization

In this paper, a study on the development of a numerical modeling of the detonation of C H N O‐based gaseous explosives is presented. In accordance with the numerical model, a FORTRAN computer code named GasPX has been developed to compute both the detonation point and the detonation properties on the basis of Chapman–Jouguet (C‐J) theory. The determination of the detonation properties in GasPX is performed in chemical equilibrium and steady‐state conditions. GasPX has two improvements over other thermodynamic equilibrium codes, which predict steady‐state detonation properties of gaseous explosives. First, GasPX employs a nonlinear optimization code based on Generalized Reduced Gradient (GRG) algorithm to compute the equilibrium composition of the detonation products. This optimization code provides a higher level of robustness of the solutions and global optimum determination efficiency. Second, GasPX can calculate the solid carbon formation in the products for gaseous explosives with high carbon content. Detonation properties such as detonation pressure, detonation temperature, detonation energy, mole fractions of species at the detonation point, etc. have been calculated by GasPX for many gaseous explosives. The comparison between the results from this study and those of CEA code by NASA and the experimental studies in the literature are in good agreement.     

Entrapment of urease in poly(1‐vinyl imidazole)/poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) network

In this article, urease was immobilized in a conducting network via complexation of poly(1‐vinyl imidazole) (PVI) with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid) (PAMPS). The preparation method for the polymer network was adjusted by using Fourier transform infrared (FTIR) spectroscopy. A scanning electron microscope (SEM) study revealed that enzyme immobilization had a strong effect on film morphology. The proton conductivity of the PVI/PAMPS network was measured via impedance spectroscopy, under humidified conditions. The basic characteristics (Michealis‐Menten constants, pH_opt, pH_stability, T_opt, T_stability, reusability, and storage stability) of the immobilized urease were determined. The obtained results showed that the PAA/PVI polymer network was suitable for enzyme immobilization. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Hydrodynamics of gas fluidized beds with mixture of group D and B particles

The dynamics of a gas‐solid fluidized bed containing Geldart Group D particles mixed with a small proportion of Geldart Group B particles are investigated using pressure fluctuations data. Time series analysis, using a variety of nonlinear dynamics tools, shows that the slugging present with Group D particles can be suppressed by the addition of a small proportion of Group B particles. The power spectra and the auto‐correlation function are used for a preliminary evaluation of dominant slug frequencies. It is shown that the bed fluidized with the mixture of Group D and B particles behaves in a less periodic manner and is dominated by more random bubble motion. On the other hand, the correlation integral is used to analyze the chaotic behaviour of the flow, through evaluation of the fractal structure of the reconstructed attractors. It is shown that the bed fluidized with Group D particles is characterized by a combination of steady slug motion and irregular particles motion. The behaviour of the fluidized bed of Group D/B particles mixture is characterized by a single correlation dimension for a wide range of fluidization velocities.     

Fabrication of Si3N4 preforms from Si3N4 produced via CRN technique

Ceramic preforms with randomly distributed particles as reticulated porous structure which are generally used for metal infiltration as reinforcement, membranes, catalyst supports etc. Preforms are characterized by open porosity making possible their infiltration by liquid metal alloys. In this work, quartz powders using carbon black as a reducing agent were used for alpha Si₃N₄ powders synthesis through a carbothermal reduction and nitridation (CRN) process. The CRN process was carried out under nitrogen flow at 1,450 °C for 4 h. At high temperatures, carbon as reducing agent reacts with the oxygen of SiO₂, and the resulting metallic silicon compounds with nitrogen gas to obtain silicon nitride powder. The reacted powders were used to obtain reticulated ceramic by replica method. The powders containing various bentonite ratios were mixed in water to prepare slurry. The slurry was infiltrated into a polyurethane sponge. A high porous ceramic foam (preform) structure was achieved after burn out of the sponge. All ceramic preforms were sintered to increase stiffness (in the temperature range 900–1,350 °C). The sintered ceramic foams were subjected to compressive tests. The scanning electron microscopy was used to examine the reticulated ceramic foam structure, and X-ray diffraction analysis was performed to determine phases.