Development of Stretch Solder Interconnections for Wafer Level Packaging

A wafer level packaging technique has been developed with an inherent advantage of good solder joint co-planarity suitable for wafer level testing. A suitable weak metallization scheme has also been established for the detachment process. During the fabrication process, the compliancy of the solder joint is enhanced through stretching to achieve a small shape factor. Thermal cycling reliability of these hourglass-shaped, stretch solder interconnections has been found to be considerably better than that of the conventional spherical-shaped solder bumps.     

Effect of Y2O3, CeO2 on Sintering Properties of Si3N4 Ceramics

The effect of rare earth oxides Y203 or Ce02 on sintering properties of Si3N4 ceramics was studied and the mechanism of assisting action during sintering was analyzed. The results in dicate that the best sintering properties appear in Si3N4 ceramics with 5% Y203 or 8% CeO2. Secondary crystallites are formed at grain boundaries after heat treatment,which decreases the amount of glass phase and contributes to the improvement of high-temperature mechanical properties of silicon nitride.     

Experience in testing the Motif interface

The testing and quality assurance of the Motif 1.0 graphical user-interface software are described. The testing goals, which fell into three general categories (code coverage, defect-density, and defect-arrival rate), and a deliverable formal test suite are examined. The three phases of the testing process-evaluation, test development, and regression testing-and the tools used in testing are discussed     

Ozonation of CI Reactive Black 5 using rotating packed bed and stirred tank reactor

This study investigates the ozonation of CI Reactive Black 5 (RB5) by using the rotating packed bed (RPB) and completely stirred tank reactor (CSTR) as ozone contactors. The RPB, which provides high gravitational force by adjusting the rotational speed, was employed as a novel ozone contactor. The same ozone dosage was separately introduced into either the RPB or the CSTR for the investigation, while the experimental solution was continuously circulated within the apparatus consisting of the RPB and CSTR. The decolorization and mineralization efficiencies of RB5 in the course of ozonation are compared for these two methods. Moreover, the dissolved and off‐gas ozone concentrations were simultaneously monitored for the further analysis. As a result, the ozone mass transfer rate per unit volume of the RPB was significantly higher because of its higher mass transfer coefficient and gas–liquid concentration driving force. Furthermore, ozonation kinetics was found to be independent of the gravitational magnitude of an ozone gas–liquid contactor. Therefore, the results suggest employing RPBs as ozone‐contacting devices with the advantage of volume reduction. The experimental results, which can be used for further modeling of the ozonation process in the RPB, also show the requirement of correct design for the RPB. Consequently, the present study is useful for the understanding of practical application of RPBs. Copyright © 2004 Society of Chemical Industry     

Crystal growth of selected II–VI semiconducting alloys by directional solidification: Part I Ground-based experiments

A series of Hg_0.84Zn_0.16 Te crystal ingots have been grown from pseudobinary melts by the Bridgmam–Stockbarger type directional solidification using a Marshall Space Flight Center/Space Science Laboratory heat-pipe furnace and the ground control experiment laboratory furnace of the crystal growth furnace which was flown on the first United States Microgravity Mission. A number of translation rates and a series of hot- and cold-zone temperatures were employed to assess the influence of growth parameters on the crystal properties for the purpose of optimizing the in-flight growth conditions. This revised version was published online in November 2006 with corrections to the Cover Date.     

Reversible energy recovery logic circuit without non-adiabaticenergy loss

The authors propose a reversible energy recovery logic (RERL) circuit for ultra-low-energy consumption, which consumes only adiabatic energy loss and leakage current loss by completely eliminating non-adiabatic energy loss. It is a dual-rail adiabatic circuit using the concept of reversible logic with a new eight-phase clocking scheme. Simulation results show that at low-speed operation, the RERL consumes much less energy than the complementary static CMOS circuit and other adiabatic logic circuits     

Study and design of step-index channel waveguide bends withlarge-angle and low-loss characteristics

By using micro-prisms, improved three-dimensional (3-D) bends of the embedded and buried waveguides of step-index profile are proposed. A simple phase compensation rule for the optimal design of the micro-prism is also presented. Through the simulation of 3-D semivectorial finite-difference beam propagation method, the transmission characteristics of the improved bends are shown to have been enhanced dramatically as compared with those of the conventional ones. Even for a bend angle of as large as 10°, the normalized transmitted power can still be greater than 95%. These results of 3-D bends are then compared with those of the two-dimensional (2-D) ones which are simplified from 3-D structures by the effective index method, and physical explanation of the discrepancy between the 3-D and 2-D results is introduced. The influences of waveguide structures and prism parameters on the transmission characteristics are discussed in detail. Some criteria for the design of large-angle low-loss 3-D improved bends are also accessed     

我国清洁代用燃料汽车发展状况

随着汽车数量的迅速增加，汽车排放的有害废气也急剧增加，人们的健康受到威胁，解决这一问题的最好办法是发展清洁代用燃料汽车。介绍了天然气汽车和液化石油气汽车的主要优点，分析了目前我国清洁代用燃料汽车的发展现状，阐述了近期适宜发展我国清洁代用燃料汽车的机遇和面临的困难。最后就提高人们的环保意识、修改和完善汽车尾气污染控制法及排放标准、清洁代用燃料汽车的有关标准和安全措施。对发展这种汽车应给予优惠政策以及零部件生产和车辆改装企业的管理等方面，提出了建议。     

A tutorial on wavelets from an electrical engineering perspective.I. Discrete wavelet techniques

The objective of this paper is to present the subject of wavelets from a filter-theory perspective, which is quite familiar to electrical engineers. Such a presentation provides both physical and mathematical insights into the problem. It is shown that taking the discrete wavelet transform of a function is equivalent to filtering it by a bank of constant-Q filters, the non-overlapping bandwidths of which differ by an octave. The discrete wavelets are presented, and a recipe is provided for generating such entities. One of the goals of this tutorial is to illustrate how the wavelet decomposition is carried out, starting from the fundamentals, and how the scaling functions and wavelets are generated from the filter-theory perspective. Examples (including image compression) are presented to illustrate the class of problems for which the discrete wavelet techniques are ideally suited. It is interesting to note that it is not necessary to generate the wavelets or the scaling functions in order to implement the discrete wavelet transform. Finally, it is shown how wavelet techniques can be used to solve operator/matrix equations. It is shown that the “orthogonal-transform property” of the discrete wavelet techniques does not hold in numerical computations     

单模光纤最小群速度色散波长附近的调制不稳定性

利用修正的非线性Ｓｃｈｒｏｄｉｎｇｅｒ方程研究了单模光纤最小群速度色散波长附近的调制不稳定性，发现了一个新的由光纤四色散导致的调制不稳定性区域，该区域的调制范围与初始入射脉冲的功率和四阶色散有关。