Resistance to gentamicin and vancomycin in enterococcal strains isolated from retail broiler chickens in Japan

A total of 137 Enterococcus strains isolated from chicken meat were subjected to antimicrobial susceptibility tests. Strains with the vanCl gene were isolated from seven of nine samples of chicken meat processed in Japan and from all chickens from China and Brazil between July 2001 and April 2002. The pulsed-field gel electrophoresis (PFGE) patterns of the isolates were distinguishable from each other, suggesting that VanCl-type vancomycin-resistant Enterococcus is preferentially colonized in broiler chickens in these countries. The incidence of high-level gentamicin resistant (HLGR) enterococci that harbored the aac(6')-le-aph(2")-la or aph(2')-Id gene varied among the countries from which the chickens originated (Japan, 2 of 65; China, 11 of 43; Brazil, 6 of 29). Moreover, the PFGE patterns of the HLGR strains were distinguishable from each other, except for two strains obtained from chickens from Brazil. The results suggest that HLGR Enterococcus is highly prevalent in broiler chickens.     

Characteristics of alpha-glucosidase production from recombinant Aspergillus oryzae by membrane-surface liquid culture in comparison with various cultivation methods

alpha-Glucosidase was produced using recombinant Aspergillus oryzae by membrane-surface liquid culture (MSLC), a method previously developed by the authors and the results compared with other methods, including shaking flask culture (SFC), agar-plate culture (APC), culture on urethane sponge supports (USC), and liquid surface culture (LSC) to determine possible reasons for the advantageous features of MSLC. When yeast extract was used as a nitrogen source, the amount of enzyme produced by MSLC was 5 or more times higher than those for SFC and LSC, but similar to that using APC. Enzyme production in USC was slightly lower than in MSLC and APC. Cell growth was similar irrespective of the cultivation method used. When NaNO3, a typical inorganic nitrogen source was used, enzyme production in all the cultures was lower than that using yeast extract. However, even using NaNO3, the amount of the enzyme produced by MSLC was 8 to 20 times higher than those by SFC, APC, USC, and LSC. Although cell growth using NaNO3 was similar to that for yeast extract in MSLC, it was markedly decreased in SFC, APC, and LSC. The reason for the difference in enzyme productivity for various cultivation methods using yeast extract and NaNO3 as a nitrogen source is discussed, on the basis of the experimental findings. The role of the oxygen transfer effect and gene expression levels in enzyme production were also examined.     

Thin Observation Module by Bound Optics (TOMBO): Concept and Experimental Verification

A compact image-capturing system called TOMBO (an acronym for thin observation module by bound optics) is presented in which the compound-eye imaging system is utilized to achieve a thin optical configuration. The captured multiple images are processed to retrieve the image of the target object. For image retrieval, two kinds of processing method are considered: image sampling and backprojection. Computer simulations and preliminary experiments were executed on an evaluation system to verify the principles of the system and to clarify the issues related to its implementation.     

X-Ray Telescope Onboard Astro-E. II. Ground-Based X-Ray Characterization

X-ray characterization measurements of the x-ray telescope (XRT) onboard the Astro-E satellite were carried out at the Institute of Space and Astronautical Science (Japan) x-ray beam facility by means of a raster scan with a narrow x-ray pencil beam. The on-axis half-power diameter (HPD) was evaluated to be 1.8?-2.2?, irrespective of the x-ray energy. The on-axis effective areas of the XRTs for x-ray imaging spectrometers (XISs) were approximately 440, 320, 240, and 170 cm(2) at energies of 1.49, 4.51, 8.04, and 9.44 keV, respectively. Those of the x-ray spectrometer (XRS) were larger by 5-10%. The replication method introduced for reflector production significantly improved the imaging capability of the Advanced Satellite for Cosmology and Astrophyics (ASCA) XRT, whose HPD is ~3.6?. The increase in the effective area by a factor of 1.5-2.5, depending upon the x-ray energy, compared with that of the ASCA, was brought about by mechanical scale up and longer focal lengths. The off-axis HPDs were almost the same as those obtained on the optical axis. The field of view is defined as the off-axis angle at which the effective area becomes half of the on-axis value. The diameter of the field of view was ~19? at 1.49 keV, decreasing with increasing x-ray energy, and became ~13? at 9.44 keV. The intensity of stray light and the distribution of this kind of light on the focal plane were measured at the large off-axis angles 30? and 60?. In the entire XIS field of view (25.4 mm x 25.4 mm), the intensity of the stray light caused by a pointlike x-ray source became at most 1% of the same pointlike source that was on the optical axis.     

Consolidation of machined magnesium alloy chips by hot extrusion utilizing superplastic flow

An examination of consolidation conditions by hot extrusion of AZ31 magnesium alloy machined chips was conducted to enhance the bonding of individual chips, in order to improve the mechanical properties. Hot extrusions were carried out in the superplastic and non-superplastic region. Microstructural observations revealed that grain refinement was attained by extruding machined chips, and the grain sizes of the chip-extruded materials were smaller than 5 m. The interfaces of individual chips of extruded materials were not identified when the chips were extruded in the superplastic region. The ultimate tensile strength was about 300 MPa and elongation-to-failure was about 10% for chip-extruded materials that were extruded in the superplastic region. These materials were comparable with the as-received alloy with respect to the room temperature strength, although the ductility was reduced to half. It was confirmed that chip consolidation utilizing superplastic flow is useful to enhance the bonding of individual grains.     

Growth control of carbon nanotubes by plasma-enhanced chemical vapor deposition and reactive ion etching

A novel process for growth of carbon nanotubes using plasma processes is reported. This process consists of formation of nanotips on substrate and growth of carbon nanotubes on it. The formation of the nanotips, which were formed under an intention to control formation of catalyst nanoparticles, was carried out on substrates by reactive ion etching. After the nanotips formation, the carbon nanotubes were grown on the substrate by plasma-enhanced chemical vapor deposition. Our results showed that the introduction of the nanotips on surface gave lower density and smaller diameter growth of carbon nanotubes than those without the structure.     

Mobile robot navigation using vision and olfaction to search for a gas/odor source

This paper presents a new approach to search for a gas/odor source using an autonomous mobile robot. The robot is equipped with a CMOS camera, gas sensors, and airflow sensors. When no gas is present, the robot looks for a salient object in the camera image. The robot approaches any object found in the field of view, and checks it with the gas sensors to see if the object is releasing gas. On the other hand, if the robot detects the presence of gas while wandering around the area, it turns toward the direction of the wind that carries the gas. The robot then looks for any visible object in that direction. These navigation strategies are implemented into the robot under the framework of the behavior-based subsumption architecture. Experimental results on the search for a leaking bottle in an indoor environment are presented to demonstrate the validity of the navigation strategies.     

Partial discharge and breakdown mechanisms in ultra-dilute SF6/N2 gas mixtures

With the goal of reducing SF₆ gas usage, we investigated partial discharge (PD) and breakdown (BD) mechanisms in ultra-dilute (0 to 1%) SF₆/N₂ gas mixtures. The experimental results and discussions are given in this paper. In particular, we focused our research on the transition characteristics of the electrical insulation performance with an extremely small amount of SF₆ content, the PD behavior on the applied voltage, and the relation among prebreakdown streamer, return stroke and BD. Moreover, we discussed the PD and so mechanisms with reference of space charge behavior. From these results, the transition threshold at which the influence of SF₆ gas on the discharge characteristics began to appear, was clarified to be SF₆ content k=10 ppm for a total pressure of 0.1 MPa     

Further improvement of a transformerless, voltage-boosting inverter for AC modules

For reducing the manufacturing cost and for increasing the efficiency of module-integrated converter the transformerless concept is suitable. The new type inverter, which is proposed in this paper, basically works as buck boost DC–DC converter. Therefore, it is possible to reduce the number of the active switches in comparison with conventional inverter for AC modules because of simple circuit topology. In this paper authors present the control method and operation test results including both stand alone and grid connected for the new type transformerless inverter. These measurement results show that the performances can compete with the conventional small inverter (rated capacity around 50 W).     

Correlation between interfacial energy and phase diagram in ceramic-metal systems

Estimates of interfacial energies between ceramics (MX) and liquid metals (A) have been arrived at by employing an improved version of the Becker’s model for interfacial energy calculations at liquid metal-liquid metal interfaces to calculate the total energy of interatomic bonds across an interface. The results of such an approximation yield values that are very close to the experimental values; for instance, the estimated value for Al₂O₃/lFe is 2 J · m⁻², which compares well with the experimental data ranging from 1.9 to 2.3 J · m⁻². It is suggested that interfacial energies depend on two terms: (1) the formation energy of MX and (2) the pairwise interaction energies between M and A atoms and X atoms and vacant interstitial sites. It is also found that the calculated interfacial energies in eutectic systems (carbides-metal, etc.) are generally low, while those in the monotectic systems (oxides-metal, etc.) are generally high.