Electronic scanning by ferrite-loaded corner reflector antennas

The measured performances of the antennas which consist of a90degcorner reflector, a horn, a core wire of a coaxial line, two or three ferrite rods, and electromagnets magnetizing the respective ferrites are presented. The following are made clear for the antenna with two ferrite rods. The load of the ferrites yields the asymmetric power pattern owing to the anisotropy of the ferrites, though the antenna geometry and the magnetization of the ferrites are symmetric. Moreover, the remarkably sharper main lobe and the higher gain are obtained by loading the ferrites. The main lobe can be turned to the direction reflected about the symmetric plane of the antenna by reversing all the dc magnetic fields applied to the ferrites, that is, electronic lobe switching in theH-plane is realized. It is shown that the antenna loaded with three ferrite rods makes the continuous scan of the main lobe possible by applying the suitable magnetic fields to the ferrites. The direction of the main lobe of these antennas is turned by electronically changing the currents of the electromagnets, that is, by changing the tensor permeabilities of the ferrites. The reciprocity for antennas composed of isotropic media does not hold for these antennas. The receiving power pattern coincides with the transmitting pattern reflected about the symmetric plane when the same dc magnetic fields are applied for both cases. Hence, these antennas permit us to receive from a direction and simultaneously to transmit in the direction reflected about the symmetric plane.     

Polarization-maintaining fibers and their applications

Polarization-maintaining fibers and their applications are reviewed. The classification of high-birefringent fibers and low-birefringent fibers and their fabrication methods and characteristics are discussed in Section II. Analytical methods and numerical methods for fiber design on the birefringence are presented in Section III. Degradation factors of polarization maintenance expressed as crosstalk or mode-coupling parameters caused by internal origins such as structural imperfections, wavelength, and nonlinear effects, and by external origins such as temperature fluctuations, mechanical perturbations, and electromagnetic effects, are discussed in Section IV. Characterization methods on beat length, mode coupling, stress distribution, and mechanical strength are presented in Section V. Applications to the fiber devices and nonlinear effects, and splicing methods for the polarization-maintaining fibers are described in Sections VI and VII.     

Influence of side chain length on fluorescence intensity of ROMP-based polymeric nanoparticles and their tumor specificity in in-vivo tumor imaging

In this study, amphiphilic brush-like copolymers conjugated with short alkyl or long polymeric chains of various lengths are synthesized using ring-opening metathesis polymerization (ROMP) of substituted norbornadiene monomers followed by chemical transformations. These amphiphilic copolymers form spherical self-assemblies in aqueous media with diameters of 132-244 nm. The low critical aggregation concentration of these assemblies (2.5 × 10(-3) -1.4 × 10(-5) g/L) indicates that they are quite stable in dilute conditions. An appropriate length of polymer side chain that conjugates the polymer backbone with a hydrophobic ICG (indocyanine green) moiety enhanced the fluorescence intensities of these self-assemblies in aqueous solution as well as in tumor-bearing mice. A longer side chain conjugated with tumor targeting agents could significantly affect the tumor specificity of self-assemblies to a greater extent. The self-assemblies bearing hydrophilic tumor targeting agents, such as a glucosamine molecule and a cyclic RGD (arginine-glycine-asparatic acid) peptide, accumulated in tumor tissues with high selectivity, while those having a hydrophobic targeting agent, such as folate moieties, accumulated in tumor sites with low selectivity. The results demonstrated here unambiguously indicate that the fluorescence intensity and tumor specificity of self-assemblies are strongly affected by the length of side chains that conjugate with dyes and targeting agents.     

Full Eulerian deformable solid-fluid interaction scheme based on building-cube method for large-scale parallel computing

We propose a full Eulerian incompressible solid-fluid interaction scheme capable of achieving high parallel efficiency and easily generating meshes for complex solid geometries. While good scalability of a full Eulerian solid-fluid interaction formulation has been reported by Sugiyama et al, their analysis was carried out using uniform Cartesian mesh and an artificial compressibility method. Typically, it is more challenging to achieve good scalability for hierarchical Cartesian meshes and a fully incompressible formulation. In addition, the conventional full Eulerian methods require a large computational cost to resolve complex solid geometries due to the usage of uniform Cartesian meshes. In an attempt to overcome the aforementioned issues, we employ the building-cube method, where the computational domain is divided into cubic regions called cubes. Each cube is divided at equal intervals, the same number of cubes is assigned to each core, and the spatial loop processing is executed for each cube. The numerical method is verified by computing five numerical examples. In the weak scaling test, the parallel efficiency at 32768 cores with 32 cores as a reference is 93.6%. In the strong scaling test, the parallel efficiency at 32768 cores with 128 cores as a reference is 70.2%.     

Rupture nucleation on an interface with a power-law relation between stress and displacement discontinuity

We consider rupture initiation and instability on a displacement-weakening interface. It is assumed to follow a power-law relation between a component of displacement discontinuity (whether tensile opening in mode I or shear slippage in modes II or III) and the reduction from peak strength of a corresponding component of stress (normal or shear stress) on the interface. That is, the stress decrease from peak strength, as the interface discontinuity develops, is assumed to be proportional to displacement-discontinuity to some exponent n > 0. The study is done in the 2D context of plane or anti-plane strain, for an initially coherent interface which is subjected to a locally peaked “loading” stress which increases quasi-statically in time. We seek to establish the instability point, when no further quasi-static solution exists for growth of the ruptured zone along the interface, so that dynamic rupture ensues. We have previously addressed the case of linear displacement-weakening (n = 1), and proven the remarkable result that for an unbounded solid, the length of the displacement-weakening zone along the interface at instability is universal, in the sense of being independent of the detailed spatial distribution of the locally peaked loading stress. Present results show that such universality does not apply when n differs from 1. Also, if n < 2/3, there is no phase of initially quasi-static enlargement of the rupturing zone; instead instability will occur as soon as the maximum value of the loading stress reaches the peak strength. We first employ an energy approach to give a Rayleigh–Ritz approximation for the dependence of quasi-static rupture length and maximum displacement-discontinuity on the loading stress distribution of a quadratic form. Results, depending on curvature of the loading distribution, show that qualitative features of the displacement-discontinuity development are significantly controlled by n, with the transition noted at n = 2/3. Predictions of the simple energy approach are in reasonable quantitative agreement with full numerical solutions and give qualitative features correctly.     

Effect of Temperature Change on Interfacial Behavior of an Acoustically Levitated Droplet

Under the microgravity environment, new and high quality materials with a homogeneous crystal structure are expected to be manufactured by undercooling solidification, since the material manufacturing under the microgravity environment is more static than that under the normal gravity. However, the temperature change on the interface of the material in space can affect on the material processing. The purpose of the present study is to investigate effect of the temperature change of interface on the large levitated droplet interface. A water droplet levitated by the acoustic standing wave is heated by YAG laser. In order to heat the water droplet by the laser heating, rhodamine 6G is solved in it to achieve high absorbance of the laser. The droplet diameter is from 4 to 5.5 mm. The deformation of the droplet interface is observed by high speed video camera. The temperature of droplet is measured by the radiation thermometer. It is noticed that the larger droplet under the higher sound pressure tends to oscillate remarkably by the laser heating.     

Volatile aroma components and antioxidant activities of the flavedo peel extract of unripe Shiikuwasha (Citrus depressa Hayata)

The flavedo peel extracts of unripe Shiikuwasha (Citrus depressa Hayata) fruits were extracted using steam distillation (SD) or a cold-press (CP) system. Volatile aroma content and composition were determined using gas chromatography (GC) and each compound was identified using gas chromatography-mass spectrophotometry (GC-MS). The major constituents of the extracts were monoterpene hydrocarbons (91.75-93.75%[709.32-809.05 mg/100 g of fresh flavedo peel]) including limonene (43.08-45.13%[341.46-379.81 mg/100 g of fresh flavedo peel]), γ-terpinene (27.88-29.06%[219.90-245.86 mg/100 g of fresh flavedo peel]), and p-cymene (8.13-11.02%[61.47-97.22 mg/100 g of fresh flavedo peel]). The extraction process used was determined to be a decisive factor that affects the composition of key citrus aroma components, as well as the antioxidant activities of the Shiikuwasha fruit. Antioxidant capabilities of the extracts were examined by assay of 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity and β-carotene bleaching inhibition. The cold-press extraction system may better retain the total phenolic content of the flavedo peel and display superior antioxidant activities, compared to the steam distillation extraction method. PRACTICAL APPLICATION: Shiikuwasha (Citrus depressa Hayata) is a type of small citrus fruit, and has been used as raw material for beverage and food additive productions in Japan. It had a unique aroma composition in which the limonene content of its peels is lower than that of other commonly known citrus peels. The present study detailed the volatile aroma composition, as well as antioxidant capabilities of Shiikuwasha peel extracts of different extraction methods, that are cold-press and steam distillation methods. The results of this study may provide a basis for selection of Shiikuwasha peel extracts in food industry for citrus flavor production.     

Purification and characterisation of antioxidative peptides from unfractionated rice bran protein hydrolysates

Crude rice bran protein (CRBP) was prepared by alkaline extraction and then treated with 0.6 m HCl to remove phytic acid. The phytate‐free rice bran protein (PFRBP) was hydrolysed with proteases M, N, S, P and pepsin under optimal conditions. Hydrolysates obtained from various hydrolysis periods were subjected to analysis for their degree of hydrolysis (DH) and functional properties. The hydrolysates were fractionated by reversed‐phase column chromatography on Kaseigel ODS resin (120–140 μm) using a stepwise gradient of aqueous ethanol, and their activities were measured. The 40% ethanol fraction of protease P 4 h‐hydrolysate was separated by successive reversed‐phase high‐performance liquid chromatography and the amino acid sequences of isolated antioxidative peptides were determined by a protein sequencer and matrix‐assisted laser desorption ionisation‐time of flight mass spectrometry. Crude rice bran protein had higher antioxidative activity than PFRBP, due to the presence of phytic acid. Phytate contents of rice bran, CRBP and PFRBP were 2.5%, 1.42% and 0%, respectively. The activity of PFRBP increased upon protease digestion. Protease M hydrolysates showed the highest DH, but the lowest antioxidative activity. Hydrolysates with DH below 10% had higher antioxidative activity than those above 20%. This result indicates that the antioxidative activity of the hydrolysates is inherent to their characteristics amino acid sequences of peptides depending on the protease specificities.     

Biovalorization of brewers’ spent grain for the production of laccase and polyphenols

Brewers’ spent grain (BSG) is the main solid by‐product of the brewing process and is typically disposed of as cattle feed. In this study, BSG was evaluated as a substrate for the production of polyphenols and the lignin‐degrading enzyme laccase using fungal solid‐state fermentation by Trametes versicolor. Laccases are finding increasing applications in the food industry and polyphenols have benefits for human health. After 14 days of fermentation with T. versicolor, there was a 3.4‐fold increase in the extraction of total polyphenols compared with untreated BSG. Using BSG as the sole source of carbon and nitrogen, maximum laccase activity was achieved after seven days of treatment with an activity of 560 U/L. Based on these results, BSG is suggested to be a good lignocellulose waste material to produce value‐added products such as the enzyme laccase and polyphenols. Copyright © 2018 The Institute of Brewing & Distilling