Abrasion Resistance of Field-Assisted Ion-Exchanged Glass

The fracture strength of HF-etched samples was measured as a function of field-assisted K-Na ion exchange depth, as well as the severity of abrasion. As expected, the more severe the abrasion, the greater the depth required to make the strength insensitive to abrasion. An abrasion-independent weakening mechanism that increased with exchange depth was also found to be operative.     

Preparation of ceria-zeolite catalysts by different techniques and its effect on selective catalytic reduction of NO with NH3 at high space velocities

Topics in Catalysis - Several zeolite-based catalysts containing Ce3+ and/or CeO2 were prepared by a variety of catalyst preparation techniques like ion exchange, solid-state ion exchange,...     

Cationic surfactant-selective potentiometric sensors based on neutral ion-pair carrier complexes

Poly(vinyl chloride) (PVC) membrane electrodes to determine monomer concentrations of tetradecyltrimethylammonium ion (TTA⁺) and hexadecylpyridinium ion (HPy⁺) based on neutral ion-pair carrier complexes of tetradecyltrimethylammonium dodecyl sulfate (TTA⁺-DS⁻) and hexadecylpyridinium dodecyl sulfate (HPy⁺-DS⁻), respectively, are reported here. The electrodes exhibit a Nernstian slope of 59 mV per decade for TTA⁺ and a sub-Nernstian slope of 34.5 mV per decade for HPy⁺ ions. The TTA⁺ ion-selective electrode (ISE) and the HPy⁺-ISE can determine the monomer units down to concentrations as low as 4.0×10⁻⁴M and 1.66×10⁻⁵ M, respectively. The effect of various additives, such as the anionic polyelectrolyte sodium dextran sulfate and macrocyclic β-cyclodextrin, on the surface activity exhibited by the cationic surfactants TTA⁺-DS⁻ and HPy⁺-DS⁻, in the presence of background concentrations of NaCl was also examined with surfactant-selective sensors. The Gibbs free energy of micelle formation (ΔG _m ) of both surfactants in the presence of various additives was calculated and found to be less favorable with respect to an increase in the amount of additives due to less availability of cationic surfactant monomer units. The ion-pair complexes TTA⁺-DS⁻ and HPy⁺-DS⁻ were found to behave as selective carrier compounds in PVC membranes in determining the concentration of monomer units of both TTA⁺ and HPy⁺, respectively. The proposed sensors worked well at a fairly acidic pH of 1–6.5 with response time of 60 s. The sensors responded well to the surfactant ions even in the presence of additives at lower concentration. The lifetime of the sensors is 3 mon.     

Antioxidant efficacy of amino acids in methyl linoleate at different relative humidities

Antioxidant efficacy of the amino acids methionine, tryptophan, aspartic acid, serine, alanine and arginine in methyl linoleate were compared to a methyl linoleate control at 2,50 or 79% relative humidity (RH) at 37°C. Antioxidant efficacy varied with RH and the individual amino acids. Arginine had the highest antioxidant efficacy at all RH values compared to the control. The efficacy of alanine was equal to that of arginine at RHs of 50 and 79% but was lower at 2% RH. The presence of aliphatic, alkaline amino, hydroxyl or thiol groups in the side chain of the amino acids increased the antioxidant efficacy at high RHs.     

Design of novel compact anti-stiction and low insertion loss RF MEMS switch

A novel torsional RF MEMS capacitive switch design on silicon substrate is presented. The optimized switch topology such as reduction in up-state capacitance results in insertion loss better than ?0.1 dB till 20 GHz. Off to on state capacitance ratio is also improved by 18 fold and isolation is better than ?43 dB at 9.5 GHz. The achieved on state return loss is ?38 dB as compared to ?21 dB at 9.5 GHz. An optimized reduction in contact area and use of floating metal layer increases the switching speed from 56 to 46 μsec. It also increases the switch reliability by alleviating the stiction.     

Analysis and optimization of fixture under dynamic machining condition with chip removal effect

Dynamic interactions in the tool–workpiece and workpiece–fixture systems significantly impinge on the quality of finished workpieces. The presented simulation system integrates the effects of workpiece fixture dynamics with the other factors contributing to the machining process dynamics. It provides more accurate prediction of the process output which helps in the design of the optimum fixture configuration prior to the production stage. Modelling of the frictional contact behaviour between the fixture element and the workpiece helps to improve the prediction accuracy of the simulation system which accelerates the convergence to the optimum fixture configuration design and consequently improves the machined part dimensional accuracy and geometric integrity. The developed simulation is capable of modelling complicated part geometries by interfacing with commercial ANSYS.V10^® packages. This research work minimizes the deformation of workpiece using integrated optimization tool of Genetic algorithm (GA) and ANSYS Parametric Design Language (APDL) of finite element analysis. The same layouts given by the above optimization tool are used in the experimental setup and it is found that the improved geometric tolerance of squarness and flatness of the given workpiece. The chip removal effect and frictional contact between the workpiece and the fixture elements are taken into account based on element death technique and nonlinear finite-element analysis. A Case study of an open slot milling process illustrates the application of the proposed improved geometric tolerance approach.     

Performance of floating cum tilted-wick type solar still with the effect of water flowing over the glass cover

A simple transient performance of floating cum tilted-wick type solar still has been presented by incorporating the effects of water flowing over a glass cover, heat capacity of tilted-wick water surface and floating-wick water surface. Explicit expressions for flowing water, glass, tilted-wick water surface and floating-wick water surface temperature and efficiency of the system have been derived. Numerical calculations have been carried out for a typical day in the month of March 2004. The relative standard deviations between the numerical and experimental results of different temperature components of the proposed still have been found. The results indicate that the relative standard deviations between theoretical and experimental results are less than 8% (glass cover), 2% (tiltedwick water surface), 1% (floating-wick water surface) and 2% (flowing water at the lower end of the glass cover) an average for the working hours of the day. Moreover, based on the numerical results, the following conclusions have been drawn: (i) glass cover temperature decreases significantly; (ii) the effect of water flowing over the glass cover has a fascinating effect on the production of distillate output during peak sunny hours; (iii) water flow rate of 1.5 m/s is optimum, and beyond it the efficiency decreases. Experimental investigations have been performed at Sri Ramakrishna Mission Vidyalaya College of Arts and Science, Coimbatore, India.     

A Simple D 2-Sampling Based PTAS for k-Means and Other Clustering Problems

Given a set of points \(P \subset\mathbb{R}^{d}\) , the k-means clustering problem is to find a set of k centers \(C = \{ c_{1},\ldots,c_{k}\}, c_{i} \in\mathbb{R}^{d}\) , such that the objective function ∑ _x∈P e(x,C)², where e(x,C) denotes the Euclidean distance between x and the closest center in C, is minimized. This is one of the most prominent objective functions that has been studied with respect to clustering. D ²-sampling (Arthur and Vassilvitskii, Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) is a simple non-uniform sampling technique for choosing points from a set of points. It works as follows: given a set of points \(P \subset\mathbb{R}^{d}\) , the first point is chosen uniformly at random from P. Subsequently, a point from P is chosen as the next sample with probability proportional to the square of the distance of this point to the nearest previously sampled point. D ²-sampling has been shown to have nice properties with respect to the k-means clustering problem. Arthur and Vassilvitskii (Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) show that k points chosen as centers from P using D ²-sampling give an O(logk) approximation in expectation. Ailon et al. (NIPS, pp. 10–18, 2009) and Aggarwal et al. (Approximation, Randomization, and Combinatorial Optimization. Algorithms and Techniques, pp. 15–28, Springer, Berlin, 2009) extended results of Arthur and Vassilvitskii (Proceedings of the Eighteenth Annual ACM-SIAM Symposium on Discrete Algorithms, SODA’07, pp. 1027–1035, SIAM, Philadelphia, 2007) to show that O(k) points chosen as centers using D ²-sampling give an O(1) approximation to the k-means objective function with high probability. In this paper, we further demonstrate the power of D ²-sampling by giving a simple randomized (1+?)-approximation algorithm that uses the D ²-sampling in its core.     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

Low frequency ac conduction and dielectric relaxation behavior of solution grown and uniaxially stretched poly(vinylidene fluoride) films

The measurements of ac conductivity [σ_m(ω)], dielectric constant [?′(ω)] and loss [?″(ω)] have been performed on solution grown (thickness ∼85 μm) and uniaxially stretched (thickness ∼25, 45 and 80 μm) films of poly(vinylidene fluoride) (PVDF) in the frequency range 0.1 kHz-10 MHz and in the temperature range 77-400 K. The σ_m(ω) can be described by the relation σ(ω) = Aω^s, where s is close to unity and decreases with increase in temperature. Three relaxations, observed in the present investigation, have been designated as the α_c-, the α_a- and the β-relaxations appearing from high temperature side to the low temperature side. The α_c-relaxation could not be observed in the case of uniaxially stretched poly(vinylidene fluoride) films. The α_c- and α_a-relaxations are associated with the molecular motions in the crystalline regions and micro-Brownian motion in the amorphous regions of the main polymer chain, respectively, whereas the β-relaxation is attributed to the rotation of side group dipoles or to the local oscillations of the frozen main polymer chain.