相转移催化合成芳基烷基醚

报道了以四丁基溴化铵为相转移催化剂，简便地合成了１０个芳基烷基醚，反应几乎是定量地快速进行。     

认清形势把握重点努力做好水利建设与管理工作

一、“十五”以来水利建设与管理工作的简要回顾 “十五”是我国水利事业全面、快速发展的五年。回顾“十五”以来水利建设与管理工作，可以用三句话来概括：一是工作机遇好；二是工作成绩大；三是还存在不少问题。     

钕电解阳极过电位的测定

用慢扫描示波法测定了钕电解的阳极过电位 .考察了温度、阳极电流密度、Nd2 O3添加量、电解质组成等因素对阳极过电位的影响 ,探讨了降低阳极过电位的可能途径 .结果表明 ,阳极过电位随阳极电流密度的增加而增大 ,随温度的升高而减小 ,一定范围内 ,阳极过电位与阳极电流密度的对数呈线性关系 ,满足塔菲尔方程 ;电解质中LiF和Nd2 O3浓度增加 ,阳极过电位降低 ;适当控制阳极电流密度、升高温度、增加电解质中LiF和Nd2 O3的浓度并尽可能减小极间距 ,均有利于降低阳极过电位     

Al-Cu双金属复合结构的扩散连接试验研究

应用扩散连方法进行了Al-Cu双金属复合结构的试验研究，比较了不同的焊接工艺，材料组合以及母材状态情况Al合金与Cu的连接性，观察了接头区域的微观组织结构，研究表明，固相扩散连接是一种适用于异种材料连接的有效方法，通过在连接区域形成Al-Cu金属间化合物，达到Al和Cu的有效连接，材料组合，母材原始状态以及连接工艺参数对Al合金与Cu的扩散连接存在着明显的影响。表面镀Ni工艺不但能够有效阻止Al和Cu之间形成脆性相，而且Al和Ni之间形成了良好的扩散连接，改善了接头性能。     

基于CORBA和多Agent的模具敏捷制造的工作流管理

介绍了CORBA的工作原理，分析了模具敏捷制造的特点，提出了基于CORBA的模具敏捷制造工作流管理模型，并且将多Agent技术应用到该模型之中，使其具有清晰的结构，良好的开放性、集成性和自适应性。     

Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

Preparation and gas-sensing characteristics of nanocrystalline spinel zinc ferrite thin films

Zinc ferrite is a promising sensor material. In this paper, thin films of nanocrystalline zinc ferrite were deposited on alumina substrates by nebulization of a 0.01-M solution of a mixture of ZnCl/sub 2/ and FeCl/sub 3/ in ethanol (Zn:Fe=1:2) followed by pyrolysis and annealing in flowing air. The resulting films were characterized by X-ray diffraction and scanning electron microscopy, and the gas-sensing properties of as-deposited films were also investigated.     

丙烯酸酯聚氨酯紫外固化凝胶生成动力学研究

采用丙烯酸酯聚氨酯和二苯甲酮/安息香乙醚复合光敏剂,对该体系紫外光固化反应的凝胶生成动力学进行分析。用红外光谱定量测定光聚合过程的变化,发现光聚合反应主要是以双键打开,交联为特征的,并得出1408cm~(-1)双键吸收峰随光照时间而变化的关系式:P_(c=c)=0.325 t~(0.135)。临界凝胶点可由双键反应程度与凝胶分数之间关系外推得到,凝胶点后,体系中存在一个凝胶与溶胶之间分配关系,此时凝胶与溶胶共存,凝胶中双键反应程度P_(A(g))>总双键反应程度P_A>溶胶中双键反应程度P_(A(S))。随着凝胶增加,P_A和P_(A(g))逐渐上升,而P_(A(s))下降。此体系的紫外固化实验工作曲线与理论值基本一致。     

Synthesis, characteristics and oxygen-sensitive properties of SrMgxTi 1 − xO3 nanocrystals

SrMg_xTi_{1 - x}O₃ nanocrystals (x = 0.1–0.6) were synthesized by the stearic acid gel method. Powder samples were characterized by X-ray diffraction and X-ray photoelectron (XP) spectroscopy. The results showed that the lattice parameter a and the O 1s XP spectrum changed not only with the Mg content x but also with the grain size d of the samples. The conductivity of a thick film specimen fabricated on an aluminium oxide wafer was investigated in a nitrogen—oxygen atmosphere.     

溶胶－凝胶法制备Pb（Zr，Ti）O_3玻璃陶瓷过程中的结构变化

本文介绍溶胶－凝胶法制备均匀ＰｂＺｒ－Ｔｉ－Ｂ－Ｓｉ凝胶玻璃，并通过适当热处理在凝胶玻璃中原位生长Ｐｂ（Ｚｒ；Ｔｉ）Ｏ３微晶的新工艺·利用ＩＲ谱考察了凝胶玻璃中的元素键合结构随温度的变化．结合热分析和ＸＲＤ；ＳＥＭ技术，研究了Ｐｂ（Ｚｒ，Ｔｉ）Ｏ３微晶在凝胶玻璃中的生长过程及该材料的结构特点．发现Ｐｂ２（Ｚｒ，Ｔｉ）２Ｏ６＋ｘ立方焦绿石介稳过渡相的纳米微晶首先出现于该体系中，并在更高的温度下先后完全转变成三方和四方Ｐｂ（Ｚｒ，Ｔｉ）Ｏ３钙钛矿相．电子显微观察结果表明，该工艺制备的Ｐｈ（Ｚｒ；Ｔｉ）Ｏ３玻璃陶瓷具有均匀的细晶结构．