Raising the hit rate for wafer fabrication by a simple constructive heuristic

The rate of on-time delivery, namely hit rate, is a very significant performance measurement index for semiconductor wafer fabrication. This study proposes an efficient simple constructive heuristic (SCH), called slack multiplied uncompleted ratio (SMUR), for raising the hit rate in wafer fabs. Effectiveness of the proposed SMUR heuristic is verified by conducting simulation experiments based on a well known model from the relevant literature. The results indicate that the proposed SMUR heuristic is a state-of-the-art SCH for the current problem by comparing the obtained results to the best available SCHs in the relevant literature. Since the proposed SMUR heuristic is easy to implement and decreases the computational burden, this study successfully develops a practical approach which will hopefully encourage practitioners to apply it to real world problems.     

Size and expansion ratio analysis of micro nozzle gas flow

Size and expansion ratio effects on the flowfield are investigated for micro converging-diverging nozzles. Numerical computations are conducted by using two dimensional augmented Burnett equations and Navier-Stokes equations that were derived from the Boltzmann equation. The Maxwell-Smoluchowski slip boundary condition is used for adiabatic walls, and Steger-Warming flux vector splitting scheme is applied to the convective inviscid flux terms. The results from the augmented Burnett equation are compared with Navier-Stokes and Direct Simulation Monte Carlo (DSMC) results. Then, nozzle-size analysis is conducted for between 2 µm and 100 µm throat width. Influence of the Knudsen number is investigated, and temperature and Mach number variations are presented. In addition, the influence of the expansion ratio is studied with three (1.7:1, 3.4:1, and 6.8:1) different configurations. The results are compared with each other and an experimental data in the literature.     

Multi-category micro-milling tool wear monitoring with continuous hidden Markov models

In-process monitoring of tool conditions is important in micro-machining due to the high precision requirement and high tool wear rate. Tool condition monitoring in micro-machining poses new challenges compared to conventional machining. In this paper, a multi-category classification approach is proposed for tool flank wear state identification in micro-milling. Continuous Hidden Markov models (HMMs) are adapted for modeling of the tool wear process in micro-milling, and estimation of the tool wear state given the cutting force features. For a noise-robust approach, the HMM outputs are connected via a medium filter to minimize the tool state before entry into the next state due to high noise level. A detailed study on the selection of HMM structures for tool condition monitoring (TCM) is presented. Case studies on the tool state estimation in the micro-milling of pure copper and steel demonstrate the effectiveness and potential of these methods.     

扩展阴极法处理含铜废水的研究

采用扩展阴极法对酸性稀溶液中Cu2+的回收处理进行了研究。结果表明:扩展阴极法与常规的板式电解法相比,去除率提高了38%,能耗降低了20%,电解废水的pH值适用范围在1～4之间,且处理废水量大。     

Rheological and Thermal Properties of Extruded Mixtures of Rice Starch and Isolated Soy Protein

Many foods gain new mechanical, thermal and textural properties after being processed due to interactions between carbohydrates and proteins. This effect is characteristic for each foodstuff. The properties of extruded isolated soy protein (ISP) and rice starch were studied considering the following extrusion variables: starch proportion with respect to ISP (0–100%), pH (3–9), moisture content (20–30%) and temperature (140–180ºC). The following characteristics were measured: Water absorption index (WAI), water solubility index (WSI), glass transition temperature (T_g), melting temperature (T_m), viscosity at 90ºC and at 50ºC, storage (G′), loss modulus (G′′) and tan δ. The results indicate that the extruded starch exhibits higher WAI and WSI values than untreated starch. For extruded ISP these values are much lower than for untreated ISP. Extrudates with higher starch proportion had higher T_g and T_m values; pH has a significant effect (p<0.05), at pH 3 higher T_g values were observed, and at pH 9 higher values of T_m. The highest viscosities at 90ºC and 50ºC were observed for extrudates with a higher starch proportion and pH 9. Extruded mixtures showed a more elastic than viscous behavior and an extruded 1:1 blend of starch‐ISP exhibited the behavior of a viscous liquid.     

Phenotypic study on total and partial lifetime traits for dairy ewes

A data file on 36,396 lactations was used to determine the strength of the phenotypic relationship between productive, reproductive and lifespan traits for 7935 Spanish Churra ewes. These ewes first lambed between 1989 and 1997 and belonged to 23 flocks. The study took into account four lifespan traits (lifetime, productive life, useful life and lifetime score), three productive traits (total milk yield produced during lifetime, lambs weaned during ewe lifetime and total revenues from sold milk and weaned lambs during lifetime) and two reproductive traits (age at first lambing and mean interval between successive lambings). Moreover, milk yield and revenues from sold milk and weaned lambs were calculated per day of lifetime, productive life and useful life. Partial lifespan traits were considered for the first three parities. The model included flock, birth year within flock and season of birth of the ewe as fixed effects. The first two effects contributed significantly to variation in all traits, while season significantly affected lifespan traits, productive traits and age at first lambing. Milk production level was added to the model for lifespan traits only. It significantly contributed to explaining the variation in all lifespan traits with high percentage of variance explained averaging 14.91%. Lifetime averaged 2324 d. Productive life accounted for 57% of lifetime while useful life represented 50% of productive life. Age at first lambing averaged 622 d and average days dry during lifetime was 560. During lifetime, ewes gave an average of 4.6 parities, 6.5 weaned lambs and 636 l of milk. Average revenue from milk and lambs during lifetime was 673 euros. Milk/day of lifetime, productive life and useful life averaged 0.26, 0.51 and 0.93 l, respectively. The corresponding per-day revenues from sold milk and weaned lambs were, 0.27 euros, 0.55 euros and 1.01 euros, respectively. Lifespan and productive traits had strong relationships (rp among these traits ranged between 0.75 and 0.95). Two-parity and three-parity per-day milk yield had moderately high correlation (0.70-0.83) with total lifetime per-day milk yield traits. Therefore, good use of these traits would be helpful in determining best individuals early in life.     

The changes of chemical composition of microencapsulated roselle (Hibiscus sabdariffa L.) seed oil by co-extrusion during accelerated storage

Roselle seed oil (RSO) is an underutilised seed oil, which is having beneficial properties to humans. Microencapsulation of vegetables and seed oil is an alternative to preserve these properties and deliver them to the human diet. In this study, microencapsulation of RSO was performed using co-extrusion technology and 1.5% w/w sodium alginate solution with 1.5% w/w high methoxyl pectin as the wall materials. Results showed that the microencapsulation efficiency was high (95.68 ± 1.95%) and the microencapsulation indeed preserved the content of unsaturated fatty acids, phytosterols, and tocopherols. During an accelerated storage condition at 65 °C for 24 days, most of these properties remained high for the first six storage days, including tocopherol which preserved high γ-tocopherol. Worth noting that the microencapsulated RSO (MRSO) was particularly effective in preserving the total unsaturated fatty acids (especially C18:1 and C18:2), even during the 24th day of storage. The total unsaturated fatty acids retained by MRSO were significantly (P < 0.05) higher (70 ± 0.4%) than the RSO (65.6 ± 1.6%). In short, microencapsulation was effective in preserving the RSO properties.     

A comparative study of anodic tantalum pentoxide and high-pressure sputtered titanium oxide

In this work we present a new method to fabricate improved TiO₂ films by using a high-pressure sputtering system. In order to minimize the damage induced in the substrate surface by the ion bombardment, a high chamber pressure of 100 Pa is used, which is very much higher than typical values in conventional systems. We present results obtained by X-ray diffraction and FTIR spectroscopy. Moreover, we will compare the properties of the resulting TiO₂-insulator-metal capacitors with those of anodic Ta₂O₅. Very thin films of TiO₂ have been obtained with a very promising quality for future electron device fabrication.