Interfacial adhesion reaction of polyethylene and starch blends using maleated polyethylene reactive compatibilizer

The interfacial reaction of the polyethylene (PE)/starch blend system containing the reactive compatibilizer maleated polyethylene (m‐PE) was directly characterized by Fourier transform infrared (FTIR) spectroscopy. A significant amount of anhydride groups on m‐PE existed as hydrolyzed forms, resulting in a large amount of carboxyl groups. Using a vacuum‐heating‐cell designed in the laboratory, the carboxyl groups were successfully transformed into the dehydrolyzed state (i.e., anhydride group). This result enabled the direct spectroscopic observation of chemical reaction occurring at the interface. For the PE/starch blend system containing m‐PE, the chemical reaction at the interface was verified by the evolution of ester and carboxyl groups in the FTIR spectra. The effect of the reactive compatibilizer on the interfacial morphology was also examined by scanning electron micrography (SEM). Enhanced interfacial adhesion was clearly observed for the blend system containing reactive compatibilizer. Tensile strengths of blend systems containing m‐PE also increased noticeably compared with the corresponding system without compatibilizer. A similar observation was made for the breaking elongation data. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 767–776, 2002     

扩展阴极法处理含铜废水的研究

采用扩展阴极法对酸性稀溶液中Cu2+的回收处理进行了研究。结果表明:扩展阴极法与常规的板式电解法相比,去除率提高了38%,能耗降低了20%,电解废水的pH值适用范围在1～4之间,且处理废水量大。     

Analysis of mechanical,thermal, and morphological behavior of polycaprolactone/wood flour blends

In the present study, the properties of polycaprolactone (PCL) and wood flour (WF) blends were examined by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), Instron mechanical tester, and scanning electron microscopy (SEM). As for results, the mechanical properties of PCL were lowered obviously, due to the poor compatibility between the two phases, when it was blended with wood flours. A fine dispersion and homogeneity of wood flour in the polymer matrix could be obtained when the acrylic acid grafted PCL (PCL‐g‐AA) was used to replace PCL for manufacture of blends. This better dispersion is due to the formation of branched and crosslinked macromolecules since the PCL‐g‐AA copolymer had carboxyl groups to react with the hydroxyls. This is reflected in the mechanical and thermal properties of the blends. In comparison with pure PCL/WF blend, the increase in tensile strength at break was remarkable for PCL‐g‐AA/WF blend. The PCL‐g‐AA/WF blends are more easily processed than the PCL/WF ones since the former had lower melt viscosity than the latter. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1000–1006, 2004     

Formation and Accumulation of Intragranular Pores in the Hydrothermally Synthesized Barium Titanate Nanoparticles

As highly integrated circuits are demanded for high‐performance electric devices, small sizes of barium titanate (BaTiO₃) as a dielectric material are desirable for the application of multilayer ceramic capacitors. Since the small sizes of the particles degrade the dielectric property, especially below a certain critical size, understanding the probable cause is significant for the high‐performance capacitors. Here, we have demonstrated nanosized BaTiO₃ with average size below 30 nm and a uniform size distribution. High‐resolution transmission electron microscopy (TEM) shows that the as‐synthesized BaTiO₃ contains intragranular pores. We have analyzed the correlation between the intragranular pores inside nanoparticles and their phase ratio of cubic and tetragonal. We have found that the presence of the intragranular pores affects low tetragonality of BaTiO₃ particles, and the intragranular pores are generated by the accumulation of hydroxyl groups during hydrothermal reaction. Formation and accumulation of intragranular pores have been investigated by ex‐situ synchrotron X‐ray diffraction and TEM analysis, suggesting the phase evolution model of nanosized BaTiO₃.     

阿司匹林结晶过程的在线分析

晶体的颗粒尺寸分布和形状是结晶产品的两个关键质量指标,不仅影响结晶产品的性质,还影响下游的过滤、干燥及运输存储等过程。利用超声粒度分析仪、衰减全反射傅里叶红外光谱仪、浊度仪与二维成像系统等分析仪器在线测量了不同搅拌速率和不同降温速率下阿司匹林乙醇溶液结晶过程中温度、浓度、颗粒尺寸分布和形状的变化情况。实验结果表明：较低的降温速率或者较大的搅拌速率条件下得到含有大量细晶的阿司匹林结晶产品;较高的降温速率下得到长宽比较大的阿司匹林结晶产品。调节降温速率和搅拌速率是一种有效控制阿司匹林结晶产品尺寸分布与形状的方法。     

MODELLING ADSORPTION EQUILIBRIUM MOISTURE CHARACTERISTICS OF ROUGH RICE

Equilibrium Moisture Content (EMC) data for medium rough rice grain, Lido variety were obtained by equilibrating rice samples at different Equilibrium Relative Humidities (ERH) and Temperatures. The employed models to fit the data were GAB, modified Chung-Pfost, modified Halsey, Modified Henderson, and modified Oswin. The data were evaluated using the standard error of moisture content, mean relative standard error (%P) of the model and the correlation coefficient r². The GAB model by indirect regression described the EMC the best, however its parameters lacked of physical meaning. The modified Chung-Pfost and modified Henderson equations presented a similar fit of the EMCERH relationships. The modified Chung-Pfost equation had lower residual values than the modified Henderson equation and was considered the best model to explain the EMC-ERH relationships.     

内循环冷却吸收装置的开发及应用

根据吸收操作的特点，开发设计了一种内循环冷却吸收装置。该吸收装置在合成氨厂使用中显示出了较高的吸收效率，取得了较好的经济效益。试验证明，该装置有利于碳化尾气的处理，能解决碳化“水平衡”问题。     

Experimental study of the burner for FAA fire test: NexGen burner

The NexGen (Sonic) burner is the new burner developed by the Federal Aviation Administration, FAA, to replace old oil burners used for the required fire certification tests on power plant‐related materials, as it provides the capability to control both air and fuel flow rates. During a fire test, the burner is supposed to simulate a certain fire condition, so the flame properties should be robust and repeatable. The NexGen burner can achieve this due to the precise fuel and air controls. However, the current calibration criterion (ISO2685:1998 and AC20‐135) may not be good enough to ensure consistent flame properties. In the presented work, the sensitivity of the burner performance to air and fuel flow rate, as measured by the temperature and heat flux for calibration purposes, was studied. Additionally, the influence of the turbulator and the thermocouple size used for flame calibration was also studied. The impact of varying fuel/air ratio and thermocouple sizes was studied by conducting fire tests on aluminum samples, to show the inadequacies in the current calibration standards.     

Comparison of relative viscosity measurement of polyvinylpyrrolidone in water by glass capillary viscometer and differential dual‐capillary viscometer

The relative viscosity (RV) of polyvinylpyrrolidone (PVP) with different molecular weights was measured with a glass capillary viscometer and with a differential dual‐capillary viscometer in water at different concentrations. For the differential dual‐capillary viscometer, RV increases with a decreasing flow rate, especially for high molecular weight PVP at a 1% concentration. A good agreement in the RV between the two methods can be obtained for PVP with different molecular weights and at various concentrations if an appropriate flow rate is selected for the differential dual‐capillary viscometer. Special precaution is needed when using the differential dual‐capillary viscometer to measure the viscosity of a pure solvent. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1312–1315, 2002