Microdroplet and Atomic Force Microscopy Probe Assisted Formation of Acidic Thin Layers for Silicon Nanostructuring

In this work, an aqueous acidic thin‐layer‐based strategy for fabricating nanostructures on silicon by using atomic force microscopy (AFM) nanolithography is presented. The approach involves the formation of microscale droplets via dilute hydrofluoride (DHF) etching, the conversion of the droplets to acidic thin layers by AFM‐probe scanning, and subsequent lithographic operations using a biased probe in the aqueous layers. By varying the concentration of the acidic DHF layers, the thin layers can facilitate the creation of both positive and negative patterns, such as oxide dots and Si pores, through anodic oxidation and dissolution. In particular, the anodic oxidation in the acidic media is associated with the field‐enhanced nonequilibrium dissociation of the weak electrolyte. The Si pore structure formation is related to the field‐assisted dissolution of anodic oxides and the Si substrate. The acidic‐layer‐based technique allows switching between different lithographic modes by changing the acidity of the DHF layers, and is complementary to bulk solution‐based and local meniscus‐based approaches in AFM nanolithography. In principle, this method can also be extended to other materials that have similar reactions with DHF.     

Dynamic spectrum management for next-generation DSL systems

The performance of DSL systems is severely constrained by crosstalk due to the electromagnetic coupling among the multiple twisted pairs making up a phone cable. In order to reduce performance loss arising from crosstalk, DSL systems are currently designed under the assumption of worst-case crosstalk scenarios leading to overly conservative DSL deployments. This article presents a new paradigm for DSL system design, which takes into account the multi-user aspects of the DSL transmission environment. Dynamic spectrum management (DSM) departs from the current design philosophy by enabling transceivers to autonomously and dynamically optimize their communication settings with respect to both the channel and the transmissions of neighboring systems. Along with this distributed optimization, when an additional degree of coordination becomes available for future DSL deployment, DSM will allow even greater improvement in DSL performance. Implementations are readily applicable without causing any performance degradation to the existing DSLs under static spectrum management. After providing an overview of the DSM concept, this article reviews two practical DSM methods: iterative water-filling, an autonomous distributed power control method enabling great improvement in performance, which can be implemented through software options in some existing ADSL and VDSL systems; and vectored-DMT, a coordinated transmission/reception technique achieving crosstalk-free communication for DSL systems, which brings within reach the dream of providing universal Internet access at speeds close to 100 Mb/s to 500 m on 1-2 lines and beyond 1 km on 2-4 lines. DSM-capable DSL thus enables the broadband age.     

Characterization method of thermomechanical parameters for microelectronic materials

Reliability of thermomechanical simulations is critically linked to the accuracy of the mechanical properties that govern the behaviour of structure, like Young's modulus (E) and coefficient of thermal expansion (CTE). For many cases, the values found in literatures are dealing with bulk properties without detailed information on temperature effects. To address such issues, it is necessary to measure the materials parameters as a function of temperature. The measurement of CTE is usually accomplished by evaluating the thermal deflections of a subjected material layer deposited on a substrate, providing that E is known at a specific temperature of experiment. A bilayer method, based on theory of elasticity, is proposed to determine both E and CTE for a given temperature with a good resolution. This paper presents the theoretical analysis, the design and process of the microsystem test structures, and the main calculation results.     

柔性有源OLED显示器制造几点技术方面的考虑

AMOLED在柔性显示领域前途似锦。LG显示展示了一款全彩4in柔性AMOLED样机,衬底为80μm厚的不锈钢薄片,曲率达到5cm弯曲半径。本文就此项柔性显示技术所面临的挑战进行了探讨．包括柔性衬底衬底的传送、如何获得特性稳定可靠的TFT以使OLED的亮度和一致性适用于此项技术的商业化推广。     

Hierarchically Assembled Mesenchymal Stem Cell Spheroids Using Biomimicking Nanofilaments and Microstructured Scaffolds for Vascularized Adipose Tissue Engineering

Composite multicellular spheroids composed of mesenchymal stem cells (MSCs) and synthetic biodegradable nanofilaments are fabricated. Extracellular‐matrix‐mimicking nanofilaments, prepared from transverse fragmentation of semicrystalline poly(L ‐lactic acid) nanofibers and subsequent surface modification with cell adhesive peptides, are used to form composite multicellular spheroids with MSCs by cellular self‐assembly. The size of the composite spheroids could be readily controlled with the integrated amount of the nanofilaments. The composite spheroids show enhanced adipogenic potential compared to homotypic spheroids. The resultant spheroids are used as building blocks for 3D biohybrid construction with the assistance of a microstructured scaffold fabricated by a direct polymer melt deposition process. An angiogenic growth factor, basic fibroblast growth factor, is also locally delivered in a sustained fashion from the heparinized scaffold surface for facile neovascularization of adipogenic tissue. The produced multiscaled and multifunctional hybrid MSC construct enable the successful formation of vascularized adipose tissue in vivo.     

Performance analysis of HomePlug 1.0 MAC with CSMA/CA

As demands for data communications among home/personal devices in home environments increase, various types of home-networking technologies have appeared. Among them, power line communication is one of the most promising wired home-networking technologies, because the existing power line facilities can be utilized for data transmission without deploying any new physical links. HomePlug 1.0 is the most popular power line communication technology, which has been standardized by the HomePlug power line alliance, and attempts to mitigate the effect of time- and frequency-varying channels by enhanced modulation and channel coding. Although HomePlug 1.0 has undergone field trials and simulations, its analytic model and performance was only conducted for throughput under saturation conditions. We propose a new analytic model to evaluate MAC throughput and delay of HomePlug 1.0 both under saturation and under normal traffic conditions. We verify our proposed model via simulations and evaluate the performance of HomePlug 1.0.     

Color demosaicing using variance of color differences.

This paper presents an adaptive demosaicing algorithm. Missing green samples are first estimated based on the variances of the color differences along different edge directions. The missing red and blue components are then estimated based on the interpolated green plane. This algorithm can effectively preserve the details in texture regions and, at the same time, it can significantly reduce the color artifacts. As compared with the latest demosaicing algorithms, the proposed algorithm produces the best average demosaicing performance both objectively and subjectively.     

Current gain dependence on subcollector and etch-stop doping inInGaP/GaAs HBTs

The DC current gain dependence of InGaP/GaAs heterojunction bipolar transistors (HBTs) on subcollector and etch-stop doping is examined. Samples of InGaP/GaAs HBTs having various combinations of subcollector doping and etch-stop doping are grown, and large area 60 μm×60 (μ) HBTs are then fabricated for DC characterization. It is found that the DC current gain has a strong dependence on the doping concentration in the subcollector and the subcollector etch-stop. Maximum gain is achieved when the subcollector is doped at 6~7×10 ¹⁸ cm^-3 while the subcollector etch-stop is doped either above 6×10¹⁸ cm^-3 (current gain/sheet resistance ratio, β/R_b=0.435 at I_c=1 mA) or below 3.5×10¹⁷ cm^-3 (β/R_b=0.426~0.438 at I_c=1 mA). The data show that it is not necessary to heavily dope the subcollector etch-stop to reduce the conduction barrier and to obtain high current gain. The high current gain obtained with the low InGaP etch-stop doping concentration is attributed to the reduction of the effective energy barrier thickness due to band bending at the heterojunction between the InGaP etch-stop and the GaAs subcollector. These results show that the β/R_b of InGaP/GaAs HBTs can improve as much as 69% with the optimized doping concentration in subcollector and subcollector etch-stop     

A self-driven active clamp forward converter using the auxiliary winding of the power transformer

This study proposes a new self-driven active clamp forward converter eliminating the extra drive circuit for the active clamp switch. The converter used the auxiliary winding of the power transformer to drive the active clamp switch and a simple RC circuit to get the dead time between the two switches. The operation principle was presented and experimental results were used to verify theoretical predictions. A 100-W (5 V/20 A) prototype converter that only exhibited 1.5-turn winding number in the auxiliary winding was sufficient to drive the active clamp switch on the input of 50 V. Finally, the measured efficiency of the converter was presented and the maximum efficiency of 91% was obtained.