既有钢筋混凝土框架结构抗震加固若干问题探讨

针对钢筋混凝土框架结构抗震加固问题的复杂性 ,本文深入分析了抗震加固结构的受力特征 ,探讨了卸荷对加固构件承载力的影响 ,并针对抗震加固后的“隐含危险转移”问题提出了相应的对策。最后 ,提出了抗震加固的基本原则 ,可供结构抗震加固时参考     

Finite-difference time-domain simulation of scattering from objectsin continuous random media

A three-dimensional (3D) finite-difference time-domain (FDTD) scheme is introduced to model the scattering from objects in continuous random media. FDTD techniques have been previously applied to scattering from random rough surfaces and randomly placed objects in a homogeneous background, but little has been done to simulate continuous random media with embedded objects where volumetric scattering effects are important. In this work, Monte Carlo analysis is used in conjunction with FDTD to study the scattering from perfectly electrically conducting (PEC) objects embedded in continuous random media. The random medium models under consideration are chosen to be inhomogeneous soils with a spatially fluctuating random permittivities and prescribed correlation functions. The ability of frequency averaging techniques to discriminate objects in this scenarion is also briefly investigated. The simulation scheme described in this work can be adapted and used to help in interpreting the scattered field data from targets in random environments such as geophysical media, biological media, or atmospheric turbulence     

顶封封隔管柱的研制与应用

中原油田近年来注水压力不断升高，井况恶化严重，为此开发了顶封封隔管柱，主要阐述了管柱工况受力特点、结构、工作原理及现场使用效果。经现场较大面积的应用证明，各项性能、技术指标达到了现场要求。     

二过碘酸合银（Ⅲ）钾引发丙类酸甲酯在淀粉上接枝共聚合反应的研究

研究了由二过碘酸合银（Ⅲ）钾（简称Ag(Ⅲ））与可溶性淀粉组成的氧化还原体系，于碱性介质中引发淀粉的接枝共聚合反应，得到高接枝效率的接枝共聚物，测定了引发剂浓度、单体浓度、pH值和反应温度对接枝参数的影响，并探讨了引发机理。     

Performance engineering and topological design of metro WDM opticalnetworks using computer simulation

This paper demonstrates the use of computer simulation for topological design and performance engineering of transparent wavelength-division multiplexing metropolitan-area networks. Engineering of these networks involves the study of various transport-layer impairments such as amplifier noise, component ripple, chirp/dispersion, optical crosstalk, waveform distortion due to filter concatenation, fiber nonlinearities, and polarization effects. A computer simulation methodology composed of three main simulation steps is derived and implemented. This methodology obtains performance estimations by applying efficient wavelength-domain simulations on the entire network topology, followed by time-/frequency-domain simulations on selected paths of the network and finally Q-budgeting on an identified worst case path. The above technique provides an efficient tool for topological design and network performance engineering. Accurate simulation models are presented for each of the performance impairments, and the computer simulation methodology is used for the design and engineering of a number of actual metro network architectures     

可靠性试验样本量和截尾时间的计算

可靠性寿命试验中，一般都因受到费用和时间的限制，因此要用截尾试验获得信息，再据此对其可靠性进行统计推断，用非参数估计的方法探讨了进行可靠性试验的样本量或截尾时间的估计方法。     

风扇磨煤机ZGMn13冲击板的失效分析

ZGMn13冲击板的失效方式为不同角度的粒子撞击和冲刷，其表面可以分为三个典型的磨损区域：低角度撞击区、高角度撞击区和冲刷区。详细分析了该三个磨损区域的磨损机理。次表面分析的结果表明，在低负度撞击和冲刷条件下，高锰钢未能充分加工硬化，耐磨性提高有限。     

Development of the Chinese Scientometric Indicators (CSI)

We describe the Chinese Scientometric Indicators (CSI), an indicator database derived from the Chinese Science Citation Database (CSCD). Its design is supported by the Natural Sciences Foundation of China (NSFC). In this indicator database data of a statistical nature are organized and categorized leading to ranked lists and providing bases for comparisons among Chinese institutions and regions.     

Magnetic anisotropy of Co-Cr thin films as a function of substrate temperature during deposition

A sequence of Co78Cr22films, 500 nm in thickness, was prepared by deposition on glass in a modified Varian D.C. magnetron S-gun sputtering system. The substrate temperature during deposition, Ts, was fixed at various values with an upper limit of 300°C. Specimens were examined by VSM, TM, FMR and TEM. Msrises significantly with increasing Ts, peaking at 200°C at 370 emu/cm³. The effective volume-averaged anisotropy drops for Ts>110°C from +1.6 KOe to progressively negative values (-4.3 KOe at 300°C). From FMR we find indications of the presence, in addition to the transition and bulk layers, of a highly negative anisotropy constituent (sim-11.5KOe anisotropy field). This resonance appears at Tsvalues of 150°C and above. TEM plane and cross-section views taken on a Ts= 150°C specimen show islands composed of tilted columns within the bulk. For vertical recording, specimens prepared at Tsvalues between 50 and 100°C are recommended. On the other hand, for longitudinal recording applications, films prepared at Tsvalues above 250°C would seem to be appropriate.     

行波热声驱动器的性能分析

在简单介绍行波热声驱动器的研究历史、工作机理及其与驻波型热声驱动器的区别之后，着重对环路部分的性能进行了预测分析，并给出一些有益的结论。