Separation of Ru(III), Rh(III) and Pd(II) from nitric acid solutions using ion-exchange resins bearing carboxylic betaine

To understand the adsorption properties of a styrene–divinylbenzene copolymer functionalized with N,N,N-trimethylglycine, AMP03, the adsorption behaviours for platinoid ions (Ru(III), Rh(III) and Pd(II)) were examined. Furthermore, we performed adsorption experiments using sample solutions by adding triethylamine, thiourea and N,N,N-trimethylglycine. Based on the adsorption data obtained in this study, we performed chromatographic experiments. The results indicated that all platinoid ions in the feed solution completely adsorbed on AMP03, and almost 80% of the adsorbed platinoid ions were recovered. These results show that AMP03 has the potential to recover Ru(III), Rh(III) and Pd(II) from high-level liquid waste.     

Inhibitory Effect of 8‐Halogenated 7‐Deaza‐2′‐deoxyguanosine Triphosphates on Human 8‐Oxo‐2′‐deoxyguanosine Triphosphatase,hMTH1, Activities

hMTH1 (8‐oxo‐2′‐deoxyguanine triphosphatase) hydrolyzes oxidized nucleoside triphosphates; its presence is non‐essential for survival of normal cells but is required for survival of cancer cells. In this study, 8‐halogenated‐7‐deaza‐2′‐deoxyguanosine triphosphate (8‐halogenated‐7‐deazadGTP) derivatives were synthesized. Interestingly, these triphosphates were poor substrates for hMTH1, but exhibited strong competitive inhibition against hMTH1 at nanomolar levels. This inhibitory effect is attributed to slower rate of hydrolysis, possibly arising from enzyme structural changes, specifically different stacking interactions with 8‐halogenated‐7‐deazadGTP. This is the first example of using nucleotide derivatives to inhibit hMTH1, thus demonstrating their potential as antitumor agents.     

以健康理念出发：戴尔医学区景观设计

正戴尔医学院及附属教学医院戴尔塞顿医疗中心地处奧斯汀中部德州大学奥斯汀分校校园。占地逾6.5 hm2的医学区是市内最大的医疗卫生开发区的一部分,不仅为医学院全院师生及访客提供服务,更在校园景观中创造出一片新风貌,立下全新的生态绩效标准。戴尔医学区的景观设计过程是Sasaki及顾问团队过去2年规划工作的延续,项目团队先后在2012—2014年为大学制定了校园总体规划、医学区总体规划以及德州大学奥斯汀分校景观总体规划与设计导则。与之前的总体规划项目一样,戴尔医学区的景观设计同样以多元     

Characterization of the Oxide Scale Formed on T12 Water Wall Tube After Long-term Service in Supercritical Power Plant

Oxidation of Metals - Oxide scale control is one of the critical maintenance issues in fossil fuel power plant. Hence, the water treatment of the feed water has been changed from all-volatile...     

Small-angle X-ray scattering studies on melting and recrystallization behaviors of poly(oxyethylene) crystallites in poly(d,l-lactide)/poly(oxyethylene) blends

Direct determination of the discrete distribution for crystalline lamellar thickness has been performed for poly(d,l-lactic acid)/poly(oxyethylene) (PDLLA/PEG) blends by conducting small-angle X-ray scattering (SAXS) measurements using synchrotron radiation. The PDLLA used was an random (racemic) copolymer of bio-based poly(l-lactic acid) (PLLA) and poly(d-lactic acid) (PDLA) with the lactide monomer ratio of l:d = 50:50. It is known that PLA is miscible with PEG in the amorphous state. In the current paper, we report comprehensive results on structural analyses of PDLLA/PEG blends in the course of heating and cooling process using SAXS to elucidate the change in the thickness distribution of the lamellae. As a consequence, it was found that the distribution of the lamellar thickness moves toward the larger value (in other words, lamellar thickening) as temperature approaches the melting point. Typically, the thickness distribution was dispersed in the range of 10–20 nm at room temperature and it changed toward 40 nm in the vicinity of the melting temperature. To the best of our knowledge, this is the first report of direct determination of the discrete distribution for the crystalline lamellar thickness and their in-situ changes in the course of the lamellar thickening process. As a result, the lamellar thickening was found to occur at much lower temperature for the blend samples with 10% and 20% of PDLLA contents as compared to the PEG 100% sample. This phenomenon can be ascribed to the melting point depression owing to the miscibility between PEG and PDLLA. Thereby, thinner lamellae were melted and thicker ones appeared at much lower temperature for the blends than for the PEG 100% sample. As for the average repeating distance (long period) of the lamellar stacks, an abrupt increase similar to the critical divergence was observed (from 25 nm to 50 nm) in the heating process. Not only for the melting behavior but also in the course of recrystallization, change in the lamellar-thickness distribution was uncovered, which shows strong hysteresis depending on what temperature the sample was cooled down from.     

Change in molecular weight distribution by elution of polymers from PVA cast gel

Poly(vinyl alcohol) (PVA) cast gels with high degrees of polymerization and hydrolysis were prepared at room temperature. After sufficient exchange of the outer solvent by fresh pure water, the gel was re-dissolved in pure water at a high temperature. Using this solution, the cast gel was prepared again. This re-dissolution process was repeated again, and a third cast gel was prepared. During each swelling process after each cast-drying process, the amount of elution from the gel was measured and the molecular weight distributions of PVA in the gel as well as in the outer solvent were quantitatively evaluated. The molecular weight distribution of the eluted PVA was found to depend on that of the PVA in the gel; the average molecular weight gradually increased as the re-dissolution process was repeated, while the polydispersity indices of both the PVA from the gel and the eluted PVA decreased.     

Equilibrium of one-pot polymerization of polyimide

One-pot polymerization of polyimide from 3,3′,4,4′-biphenyl tetracarboxylic dianhydride (BPDA) and 4,4′-oxydianiline (ODA) was examined. The equilibrium in the polyimide with water was examined in detail in p-chlorophenol solution during the polymerization. The equilibrium constant was expressed by log K = 1.50 + 1433 (1/T). The polymerization reaction is exothermic. The molecular weight increased with decrease of temperature. © 1996 John Wiley & Sons, Inc.     

Creep recovery of acrylate urethane oligomer/acrylate networks

Creep recovery of acrylate urethane/acrylate networks was investigated as a function of time and temperature. An important outcome was the capacity for superimposition of experimental data obtained at various temperatures. Arrhenius type temperature dependence of the creep recovery was also observed. The master curve obtained did not significantly depend on the measuring mode of creep recovery or the crosslink density, and the response could be approximated by the Bueche theory. The dynamic mechanical properties of the systems were also investigated. Retardation spectrum L obtained from the dynamic mechanical data overlapped with that obtained from the creep recovery data. The activation energy obtained from the temperature dependence of the shift factor a_T also agreed with that obtained from the temperature dependence of the creep recovery. © 1996 John Wiley & Sons, Inc.     

Properties of copolyimides prepared from different tetracarboxylic dianhydrides and diamines

Various copolymides were prepared from two acid dianhydrides (BPDA, 3,3′,4,4′-biphenyl tetracarboxylic dianhydride; PMDA, pyromelitic dianhydride) and two diamines (PPD, p-phenylene diamine; ODA, 4,4′-oxydianiline). The thermal and mechanical properties of these polyimides were examined in detail. By appropriately selecting the ratios of the acid dianhydride component and the diamine component, polyimide films having desirable mechanical and thermal characteristics can be obtained. Further, it was proved that there is a correlation between the properties and the compositions of the copolyimides and that the properties could be estimated from the compositions by the use of multiple regression analysis. © 1996 John Wiley & Sons, Inc.