低温快烧无铅精陶釉的研制

采用高温熔融法制备了适用精陶的低温无铅熔块，并应用热膨胀分析仪、SEM等方法研究了精陶釉的光泽度、热稳定性、热膨胀系数等性能。结果表明：采用Li2O，SrO，B2O3等复合熔剂，可以制备出光泽度高，热稳定好，坯釉膨胀系数匹配，结合良好，适于低温快烧工艺的无铅精陶釉。     

Synthesis and characterization of superabsorbent hydrogels composites based on polysuccinimide

A kind of novel superabsorbent hydrogel with high swelling ratio property that could be used for the development of water absorbing resin, soil water retention agent, and chemical sand‐fixing material was synthesized in this study. The hydrogels were prepared by the crosslinking reaction of polysuccinimide (PSI). The relationships between swelling ratio and volume of solvent as well as the concentration of crosslinking agent were investigated in detail. Several composites, such as starch, carrageenan, and polyacrylamide, were added into hydrogels to enhance the swelling ratio. It was found that the swelling ratio was significantly increased, which the maximum water absorbency was enhanced 2.46 times when the composite polyacrylamide (PAM) was added compared to the control. The effects of ionic strength and sensitivity of pH on hydrogels were also studied. The modified hydrogels products with swelling ratio less sensitivity to the salinity as well as relative high swelling ration in salinity system were also obtained by adding PAM. Through the Fourier transform infrared spectroscopy (FTIR) characterizations, the crosslinking reaction mechanism and the structure of composite were proposed. In addition, the transmission electron microscopy (TEM) examinations showed that some composite materials elevated the physical crosslinked and connected channels density substantially. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 550–557, 2006     

Decane reforming reaction over Pt,Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on Y-zeolite

Pt, Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on NaY- and HY-zeolite were examined as a catalyst for producing gasoline from n-decane via simultaneous reforming and cracking. The catalysts were prepared by calcining and reducing metal-ion-exchanged Y-zeolite with O₂ and H₂ at 300°C., respectively. Thus prepared catalysts were characterized by hydrogen chemisorption and temperature programmed desorption of ammonia. Pt-Ni/NaY and Pt-Ir/NaY bimetallic catalysts offered the improved activity maintenance compared to Pt/NaY monometallic catalyst. The catalysts supported on HY-zeolite showed higher selectivity toward C₅–C₇ and skeletal isomers of C₅–C₇- and C₈–C₁₀ than those of the catalysts supported on NaY-zeolite, which is a desired characteristic for increasing octane value of gasoline these days. However, deactivation with reaction time was much more pronounced on HY-zeolite-supported catalyst. When the catalyst was prcsulfided with H,S, the stability with time on stream was enhanced and the selectivity was quite different from that of the catalyst before presulfiding. The acidity of Y-zeolite and presulfiding of catalyst greatly influenced the activny, selectivity and stability of Pt, Ir, Pt-Ir and Pt-Ni bimetallic catalysts supported on Y-zeolite in n-decane reforming reaction.     

Role of La2O3 in Pd-Supported Catalysts for Methanol Decomposition

Systems of Pd supported on various La₂O₃-modified -Al₂O₃ and CeO₂–Al₂O₃ catalysts were tested for catalytic methanol decomposition and characterized by means of XRD, BET, TPR, H₂-chemisorption and CO–FTIR. The addition of lanthanum significantly improved the selectivity of CO and H₂ for all the catalysts but showed a different influence on the catalytic activity in two systems. Methanol conversion decreased on La₂O₃-modified Pd/-Al₂O₃ catalysts, in line with the reduction of Pd dispersion, while the addition of La₂O₃ improved the dispersion of Pd and reinforced Pd–CeO₂ interaction for La₂O₃-modified Pd/CeO₂–Al₂O₃ catalysts, which resulted in a high production rate of CO and H₂. Thus, a synergistic effect between CeO₂ and La₂O₃ was observed on -Al₂O₃-supported Pd catalyst for methanol decomposition.     

回火温度对ZG12Cr9Mo1Co1NiVNbNB耐热钢

为了满足高温条件下超超临界汽轮机发电机组对材料的需要,本文利用金相显微镜、扫描电子显微镜、拉伸试验机等设备研究了回火温度对ZG12Cr9Mo1Co1NiVNbNB耐热钢的组织性能的影响。研究结果表明,当保持淬火温度和时间（1100℃x1h）不变及回火时间（2h）恒定时,回火温度的变化对其显微组织及力学性能的影响比较明显。整体上来说,随着回火温度的上升,抗拉强度、屈服强度以及硬度,呈现先升高后降低的趋势,而延伸率则呈现先下降后上升的趋势。而热处理为：淬火（1100℃x1h）+第一次回火（730℃x2h）+第二次回火（720℃x2h）的试样,其显微组织相对比较理想,其板条状的回火马氏体细小致密,并且第二相呈颗粒状、大小均匀、弥散地分布于马氏体板条的晶界及晶内,因此选取其作为CB2耐热钢的优化热处理工艺。     

电凝聚方法处理聚氯乙烯工业废水试验

对电凝聚方法处理聚氯乙烯工业废水的效果及影响因素进行了分析研究。现场运 行结果表明,该方法试验装置对聚氯乙烯废水的处理效果较好,出水水质达到综合排放 标准,对COD,BOD和TSS的去除率分别达到95％,91％和90％;对废水流量负荷的变化 具有较好的适应性,保证出水水质稳定;装置的运行成本经济实用。     

Synthesis and properties of new polymerized monomer reactants matrix resins of pyrrolone–benzimidazole copolymers containing pyridine unit

A series of new polymerized monomer reactants (PMR) matrix resins of poly(pyrrolone‐benzimidazole)s containing a pyridine unit (PPBP) were synthesized by polycondensation of monoethyl ester of cis‐5‐norbornene‐endo‐2,3‐dicarboxylic acid, 2,6‐diphenyl ester pyridinedicarboxylic acid or 3,5‐diphenyl ester pyridinedicarboxylic acid, and diethyl ester of 4,4′‐oxydiphthalic acid with 3,3′‐diaminobenzidine in a mixing solution of anhydrous ethyl alcohol and N‐methylpyrrolidone under given temperature and pressure conditions. The resulting resin solutions showed good solubility in polar organic solvents and stability at room temperature. The corresponding PPBP matrix resin, molded powder, and molded plate were prepared by undergoing amidation, imidization, cyclization, and crosslinking reactions when the reaction temperature was increased from 80 to 350°C, successively; the crosslinking structure was formed by the reverse Diels–Alder reaction at 270–290°C under 50 MPa pressure (2.5–3.5 MPa displayed by the pressure meter). The chemical reactions and properties of the resulting PPBP were studied by means of FTIR, TGA, and DMA methods, and the results indicated that the kinds of PPBP materials retain excellent thermal stability and processability; when the initial decomposition temperature was above 620°C the T_g was at 413.5°C for 3,5‐PPBP‐20 molded plate. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3981–3990, 2004     

Desulfurization of commercial fuels by π-complexation: Monolayer CuCl/γ-Al2O3

Monolayer CuCl/γ-Al₂O₃ sorbent was studied for desulfurization of a commercial jet fuel (364.3 ppmw S) and a commercial diesel (140 ppmw S). The sorbent was prepared by means of spontaneous monolayer dispersion methods. Deep desulfurization (sulfur levels of <1 ppmw) was accomplished with this sorbent using a fixed-bed adsorber. The CuCl/γ-Al₂O₃ sorbent was capable of removing 6.4 and 11.2 mg of sulfur per gram for jet fuel at breakthrough (at <1 ppmw S) and saturation, respectively. The same sorbent was capable of removing 0.94 and 1.8 mg of sulfur per gram for BP diesel at breakthrough and saturation, respectively. The difference in sulfur capacities for jet fuel and diesel was apparently caused by the difference in concentrations of strongly binding compounds, such as nitrogen heterocycles, heavy (polynuclear) aromatics and fuel additives. In comparison with CuCl/γ-Al₂O₃, Cu(I)Y zeolite has higher sulfur capacities but is less stable and can be easily oxidized to Cu(II)Y by fuel additives (such as oxygenates) and moisture and consequently loses π-complexation ability. However, all these cuprous π-complexation sorbents selectively adsorb thiophenic compounds over aromatics and olefins (as predicted by the high separation factors), which resulted in the observed desulfurization capability. A feasibility study is shown for efficient regeneration of CuCl/γ-Al₂O₃ using ultrasound at ambient temperature. Possible problems associated with desulfurization using π-complexation sorbents for commercial fuels are discussed.     

Fall detection for multiple pedestrians using depth image processing technique

A fall detection method based on depth image analysis is proposed in this paper. As different from the conventional methods, if the pedestrians are partially overlapped or partially occluded, the proposed method is still able to detect fall events and has the following advantages: (1) single or multiple pedestrian detection; (2) recognition of human and non-human objects; (3) compensation for illumination, which is applicable in scenarios using indoor light sources of different colors; (4) using the central line of a human silhouette to obtain the pedestrian tilt angle; and (5) avoiding misrecognition of a squat or stoop as a fall. According to the experimental results, the precision of the proposed fall detection method is 94.31% and the recall is 85.57%. The proposed method is verified to be robust and specifically suitable for applying in family homes, corridors and other public places.     

几种火山灰质掺合料的火山灰活性研究

采用酸溶法测定并比较几种典型的火山灰质掺合料的火山灰活性,探讨其火山灰反应程度对浆体强度的影响。试验结果表明,硅灰的火山灰活性最大,明显高于煤矸石和粉煤灰;煤矸石和Ⅱ级磨细粉煤灰的火山灰活性比Ⅰ级分选粉煤灰较大;酸溶法测定的煤矸石或硅灰的火山灰活性误差较大,活性偏低;掺合料火山灰的活性与其浆体强度有一定相关性。