Ultrastructural evidence for an innervation of epithelial enterochromaffine cells in the guinea pig duodenum

The innervation of the duodenal enterochromaffine cells (E.C.) of the guinea pig was studied at the electronmicroscopic level. Pretreatment with 5-OH-dopamine was performed to visualize catecholaminergic (CA) nervous elements. Near the basement membrane of all examined E.C. in the crypts, bundles of unmyelinated nerve processes were observed, only partly ensheathed in a Schwann cell cover. At least 4 types of processes could be observed. 1) Boutons containing only small clear vesicles, probably cholinergic fibres; 2) boutons with small clear vesicles, and in addition large (greater than 200 nm) granules with a dense matrix (P-type-fibres); 3) boutons with small electron-dense vesicles, probably CA-fibres; and 4) processes with few vesicles but having the appearance of dendrites. No typical synaptic arrangements were observed, but the minimal distance between the E.C. and the nerve bundles was 150 to 250 nm, thus well within the functional limits of the "autonomic gap". Thus epithelial E.C. may be influenced by several types of nervous elements, including CA-fibres.     

Reduction of NOx Stored at Low Temperatures on a NOx Adsorbing Catalyst

Isothermal storage and reduction of NO₂ with CO, C₃H₆ and H₂ as reducing agents on a lean NO _x adsorber was investigated by temperature programmed desorption (TPD) and temperature programmed reduction (TPR) studies. The reduction of NO _x was clearly favoured with H₂ as reducing agent. Carbon monoxide and C₃H₆ showed fairly low reduction of NO _x . The NO _x reduction at low temperatures with H₂ as reducing agent was found to be effective, clearly much more effective than for CO.     

Self-aligning MEMS in-line separable electrical connector

A MEMS in-line separable connector containing features for precision self-alignment is demonstrated. The concept relies on sliding connection between female and male halves to induce vertical deflections of a set of flexible conductors and establish stable electrical contacts. Electrodeposited photoresist is used to fabricate thick, nonplanar conductors, shaped by a silicon substrate that has previously been terraced by anisotropic etching. Further etched features ensure transverse and vertical self-alignment between conductor elements during mating. Prototype 10-way connectors are demonstrated with 200 /spl mu/m wide conductors on a 250-/spl mu/m pitch. Mechanical reliability of contacts during repeated mating and demating is demonstrated, and initial measurement of contact resistance reveals an encouraging value of 30 m/spl Omega/.     

Pheromones and Other Semiochemicals for Monitoring Rare and Endangered Species

As global biodiversity declines, biodiversity and conservation have become ever more important research topics. Research in chemical ecology for conservation purposes has not adapted to address this need. During the last 10–15 years, only a few insect pheromones have been developed for biodiversity and conservation studies, including the identification and application of pheromones specifically for population monitoring. These investigations, supplemented with our knowledge from decades of studying pest insects, demonstrate that monitoring with pheromones and other semiochemicals can be applied widely for conservation of rare and threatened insects. Here, I summarize ongoing conservation research, and outline potential applications of chemical ecology and pheromone-based monitoring to studies of insect biodiversity and conservation research. Such applications include monitoring of insect population dynamics and distribution changes, including delineation of current ranges, the tracking of range expansions and contractions, and determination of their underlying causes. Sensitive and selective monitoring systems can further elucidate the importance of insect dispersal and landscape movements for conservation. Pheromone-based monitoring of indicator species will also be useful in identifying biodiversity hotspots, and in characterizing general changes in biodiversity in response to landscape, climatic, or other environmental changes.     

Effect of geometry and green density on the anisotropic sintering shrinkage of axisymmetric iron parts

Sintering shrinkage of prior cold compacted iron rings with different geometry (height to wall thickness ratio) and green density in the 6.5–7.3?g/cm³ range was investigated. It displays a minimum at an intermediate green density. Axial, tangential and radial shrinkages are different, due to the gradients of green density along the axial and the radial directions. Therefore, the effect of height on shrinkage and its anisotropy is the result of their effect on the stress distribution in the green parts during cold compaction, and the resulting green density and deformation experienced by the powder. Anisotropy decreases on increasing shrinkage.     

On the Correlation Between Residual Stresses and Global Indentation Quantities: Equi-Biaxial Stress Field

Sharp indentation test have been studied very frequently in recent years and the fundamental knowledge of the mechanics of such test has reached some maturity. Such studies also include the correlation between residual stresses and the global properties, i.e., hardness and size of the contact area. The investigations presented have been based on experimental, theoretical, and numerical methods and as a result, the basic features of the problem are fairly well understood but quantitative relations, for the determination of residual stresses using sharp indentation, have been proven to be less accurate and accordingly not suitable for a practical situation, in particular so at predominantly compressive residual stresses. It is therefore the aim of the present study to investigate this matter in some detail and to determine possible mechanisms for the difference in indentation behavior between tension and compression and, with this as a background, determine relations suitable for a quantitative determination of the residual fields. The present analysis is based on theoretical and numerical methods and in the latter case, the finite element method is relied upon. Classical Mises elastoplastic material behavior is assumed throughout the investigation.     

Bark as feedstock for dual fluidized bed gasifiers—Operability,efficiency, and economics

The demand for biofuels and biochemicals is expected to increase in the future, which will in turn increase the demand for biomass feedstock. Large gasification plants fueled with biomass feedstock are likely to be a key enabling technology in a resource‐efficient, bio‐based economy. Furthermore, the costs for producing biofuels and biochemicals in such plants could potentially be decreased by utilizing inexpensive low‐grade residual biomass as feedstock. This study investigates the usage of shredded tree bark as a feedstock for the production of biomethane in the GoBiGas demonstration plant in Gothenburg, Sweden, based on a 32 MW_th industrial dual fluidized bed gasification unit. The plant was operated with bark feedstock for 12 000 hours during the period 2014 to 2018. Data from the measurement campaign were processed using a stochastic approach to establish the plant's mass and energy balances, which were then compared with operation of the plant with wood pellets. For this comparison, an extrapolation algorithm was developed to predict plant performance using bark dried to the same moisture content as wood pellets, ie, 8%_w.b. Plant operation with bark feedstock was evaluated for operability, efficiency, and feedstock‐related cost. The gas quality achieved during the test period was similar to that obtained for operation with wood pellets. Furthermore, no significant ash sintering or agglomeration problems were observed more than 750 hours of operation. The calculated biomass‐to‐biomethane efficiency is 43% to 47% (lower heating value basis) for operation with wet bark. However, the predicted biomass‐to‐biomethane efficiency can be increased to 55%–65% for operation with bark feedstock dried to 8% moisture content, with corresponding feedstock costs in the range of 24.2 to 32.7 EUR/MWh; ie, a cost reduction of about 40% compared with wood pellets.     

Evaluation of <Emphasis Type="Italic">flaA</Emphasis> Short Variable Region Sequencing,Multilocus Sequence Typing,and Fourier Transform Infrared Spectroscopy for Discrimination between <Emphasis Type="Italic">Campylobacter jejuni</Emphasis> Strains

Discriminatory and robust typing methods are needed to improve the understanding of the dynamics of food-borne Campylobacter infections and epidemiology in primary animal production. To evaluate the strain discriminatory potential of typing methods, flaA short variable region (SVR) sequencing and Fourier transform infrared (FTIR) spectroscopy were applied on a collection of 102 epidemiologically related and unrelated Campylobacter jejuni strains. Previous application of FTIR spectroscopy for subtyping of Campylobacter has been limited. A subset of isolates, initially discriminated by flaA SVR sequencing, were further subjected to multilocus sequence typing (MLST). It was found that flaA SVR sequencing had a slightly higher discriminatory power than FTIR spectroscopy, based on the Simpson diversity index. The clustering of strains indicated that FTIR spectroscopy is indeed a suitable method for discrimination of Campylobacter. The isolates were assigned to six clusters based on flaA SVR sequences and nine clusters based on the FTIR spectroscopy profiles. Furthermore, the cluster analysis of flaA SVR sequences, MLST, and FTIR spectroscopy profiles showed a high degree of congruence, assigning the isolates to similar cluster structures. In conclusion, FTIR spectroscopy can be applied for subtyping of Campylobacter, and the high discriminatory potential of both flaA SVR sequencing and FTIR spectroscopy render them suitable screening methods for large numbers of strains.     

Polylactide latex/nanofibrillated cellulose bionanocomposites of high nanofibrillated cellulose content and nanopaper network structure prepared by a papermaking route

Previous attempts to use polylactide (PLA) latex particles and nanofibrillated cellulose (NFC) in papermaking processing have been limited to low NFC content. In the present study, a bionanocomposite material was successfully produced using a PLA latex and NFC. The components were mixed using a wet mixing method and bionanocomposite films were made by filtration followed by hot pressing. In composite materials, the dispersion of the reinforcing component in the matrix is critical for the material properties. Biopolymers such as PLA are non-polar and soluble only in organic solvents; NFC is, however, highly hydrophilic. By utilizing latex, i.e., an aqueous dispersion of biopolymer micro-particles, wet mixing is possible and the problem of aggregation of the hydrophilic nanocellulose in organic solvent is avoided. The properties of the resulting NFC/PLA latex bionanocomposite films were analyzed. Thorough blending resulted in good dispersion of the reinforcing component within the matrix. Adding increasing amounts of NFC improved the Young's modulus, tensile strength, and strain at break of the bionanocomposite material. The increase in the tensile properties was linear with increasing NFC content as a result of the good dispersion. The NFC also improved the thermal stability of the bionanocomposite material. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012