Experimental Study of a Thermoelectric Generation System

A flat wall-like thermoelectric generation system is developed for applications in exhaust heat of kilns. The design of the whole experimental setup is presented. The essential performance of the thermoelectric generation system is tested, including open-circuit voltage, output power, and system conversion efficiency. The results illustrate that, when heat source insulation is not considered, the system conversion is efficient at hot-side temperatures between 120°C and 150°C. In addition, the nonuniformity of heat transfer is found to significantly affect the power-generating ability of the system. System-level simulation is carried out using a quasi-one-dimensional numerical model that enables direct comparison with experimental results. The results of both experiment and simulation will provide a foundation to improve and optimize complex thermoelectric generation systems.     

Synchrotron infrared radiation for electrochemical external reflection spectroscopy: a case study using ferrocyanide

Synchrotron infrared radiation has been successfully coupled through an infrared (IR) microscope to a thin-cavity external reflectance cell to study the diffusion controlled redox of a ferrocyanide solution. Excellent signal-to-noise ratios were achieved even at aperture settings close to the diffraction limit. Comparisons of noise levels as a function of aperture size demonstrate that this can be attributed to the high brilliance of synchrotron radiation relative to a conventional thermal source. Time resolved spectroscopic studies of diffusion controlled redox behavior have been measured and compared to purely electrochemical responses of the thin-cavity cell. Marked differences between the two measurements have been explained by analyzing diffusion in both the axial (linear) and radial dimensions. Whereas both terms contribute to the measured current and charge, only species that originate in the volume element above the electrode and diffuse in the direction perpendicular to the electrode surface are interrogated by IR radiation. Implications for the use of ultramicroelectrodes and synchrotron IR (SIR) to study electrochemical processes in the submillisecond time domain are discussed.     

Hybrid time domain solvers for the Maxwell equations in 2D

We present a new approach to time domain hybrid schemes for the Maxwell equations. By combining the classical FD‐TD scheme with two unstructured solvers, one explicit finite volume solver and one implicit finite element solver, we achieve a very efficient and flexible second‐order scheme. The second‐order accuracy of the hybrid scheme is verified through convergence studies on perfectly conducting as well as dielectric and diamagnetic circular cylinders. The numerical results also show its superiority to the FD‐TD scheme. Copyright © 2002 John Wiley & Sons, Ltd.     

Pattern of macrophage subpopulations in post-traumatic bone infections after combined operative/antibiotic treatment

Serum samples of 485 uveitis patients were screened for the presence of anti-neutrophil cytoplasmic antibodies using a standardized immunofluorescence test (IIF) on neutrophil granulocytes. Seventeen of these sera contained cytoplasmic (C)-ANCA antibodies, while two of the sera contained perinuclear (P)-ANCA antibodies (both antinuclear antibody (ANA)-positive, one anti-myeloperoxidase (MPO)-positive). None of the C-ANCA-positive sera reacted with proteinase-3 in ELISA using a highly purified proteinase-3 preparation. Four C-ANCA and one P-ANCA-positive serum reacted with MPO. The majority of the sera did react with azurophilic granules in ELISA. The implication of these results is that in patients with uveitis a positive C-ANCA test is not diagnostic for Wegener's granulomatosis, but is most probably caused by the presence of autoantibodies against as yet unknown constituents of azurophilic granules.     

Further study of the gas temperature deviation in large-scale tangentially coal-fired boilers

Gas temperature deviation in upper furnace is an important but a less reported issue in large-scale tangentially fired boilers, since they endanger largely boilers operation. Simulations are conducted in this paper to study the deviation. Perfect agreement between the simulation results and key boiler design values and available site operation records indicates that the calculations are reliable. Based on the simulations, effect of some factors, including residual airflow swirling at furnace exit, super-heaters panels, coal particle trajectories and their combustion histories, on temperature deviations are studied in details. The most important cause and how it affects the temperature deviation are located. Two new methods, a nose on front-wall and re-arranged super-heater panels, are put forward unprecedentedly to alleviate the deviations.     

Utilizing prior information in the estimation of volume fraction distribution

For many industrial processes the bulk volume fraction of one phase such as gas or solid can be of considerable importance. For this reason it is often controlled within certain limits and therefore is known at least vaguely. Tomographic imaging of volume fraction can provide very valuable information not only on the bulk volume fraction but also on the spatial distribution of the phase of interest. Prior information on the bulk volume fraction can assist in tomographic inversion, even if this information is not precise. In this paper we propose an electrical impedance tomography approach for imaging volume fraction distribution. A vague bulk volume fraction prior is utilized in the estimation. Two‐dimensional numerical examples are used to demonstrate the proposed method. Copyright © 2005 John Wiley & Sons, Ltd.     

Duplex sonography of renal arteries as a diagnostic tool in hypertensive children

Computed duplex sonography was used to examine the renal arteries in 36 hypertensive children and adolescents (ages 4-17 years) with arterial hypertension of either renal or non-renal origin. Time-averaged flow velocities, maximum blood flow velocities as well as absolute renal blood flow and renal blood flow per gram kidney weight were measured. Normal flow velocities and normal to elevated renal blood flow volume was found in patients with acute glomerulonephritis and those with signs of chronic glomerulonephritis onset. Patients having advanced stages of chronic glomerulonephritis, on the other hand, were characterized by lower levels of all parameters. Unilateral renal artery stenosis was diagnosed correctly in four patients, although one intra-renal artery stenosis escaped imaging. Scarred kidneys exhibited low-normal or reduced flow velocities and renal blood flow volumes corresponded roughly to kidney size and preservation of normal kidney structure. Hypertension in some patients with normal kidneys showed a tendency to cause higher renal blood flow without consistent acceleration of blood flow velocities. We conclude that duplex sonography is a suitable primary diagnostic tool in measuring blood flow velocities and absolute renal blood flow volume in hypertensive children, thus facilitating the choice of the next diagnostic step.     

Design of a Microprocessor Control System for a Solid-Fuel Water Boiler

A design of an industrial microcomputer control system for a 1.6-MW boiler using solid fuel is presented. Instrumentation and control philosophies for the boiler are discussed. The microcomputer system is based on standard iSBC microcomputer boards. The software consists of a real-time operating system RXM/80 and application tasks. The designed control system saves fuel and gives a more reliable over-all operation.