EXPERIMENTAL TESTING OF DRAW—BEAD RESTRAINING FORCE IN SHEET METAL FORMING

Due to complexities of draw-bead restraining force calculated according to theory and depending on sheet metal forming properties experiment testing system, a simplified method to calculate draw-bead restraining force is put forward by experimental method in cup-shaped drawing process. The experimental results were compared with numerical results and proved agreement. It shows the method is effective.     

FORMATION OF MANGANESE SILICIDE THIN FILMS BY SOLID PHASE REACTION

1. IntroductionThe transition metal silicides have attraeted much attention because of their potentialapplicatiOIl in very large scale integration (VLSI) de.ice[1]. Near-noble metal silicides canbe used as Schottky al1d ohn1ic col1tacts in silicon-based d…     

Electric and mechanical performances of Bi0.5Sb1.5Te3 prepared by spark plasma sintering

Thermoelectric (TE) materials are a kind of functional materials which can be used to convert directly heat energy to electricity or reversely.The thermoelectric effects hold great potential for application in power generation and refrigeration.Bi2Te3 and its alloys are well known as best TE materials currently available near room temperature.This paper studies respectively the effects of spark plasma sintering (SPS) on electric performance of Bi0.5Sb1.5Te3 thermoelectric materials that are prepared through vacuum melting and ball milling.Through X-ray Diffraction and cold field emission scanning electric microscope s4800, the phase constituent and microstructure of the TE materials samples were analyzed.Electric conductivity and power factor can be improved with the rise of Spark Plasma Sintering temperature (from 300 to 500 ℃) and pressure(from 30 to 60 MPa), and the density and mechanical strength of Bi0.5Sb1.5Te3 thermoelectric material increase, too.     

（Sm，Er）-α-Sialon陶瓷材料显微结构与性能研究

采用热压烧结方法制备了Ln1.0／3Si9．3Al2.7O1．7N14．3的Ln-α-Sialon（Ln=Sm和Er）陶瓷。研究了不同Sm：Er摩尔比和外加2．5％（质量分数，下同）的相同稀土氧化物对Ln-α-Sialon陶瓷显微结构和力学性能的影响，并借助XRD、SEM、EDS对样品的物相、显微结构进行了表征。结果表明：随着Sm：Er摩尔比值的减小，α-Sialon晶粒形貌逐渐由等轴状变成长柱状，显微硬度逐渐变大，最高值为19．5GPa，抗折强度和断裂韧性逐渐降低。在原始配方的基础上外加2．5％的同种稀土氧化物能进一步促进长柱状α-Sialon晶粒的生长，力学性能得到不同程度的提高。     

Structure and blood compatibility of tetrahedral amorphous hydrogenated carbon formed by a magnetic-field-filter plasma stream

Tetrahedral amorphous hydrogenated carbon (ta-C:H) films with various substrate bias voltages were prepared using a magnetic-field-filter plasma stream deposition system. The microstructural and optical properties were studied using ellipsometric spectra. The refractive index n of each sample was obtained by simulating their ellipsometric spectral using Tauc-Lorentz oscillator model, and then the relative sp³ C ratio of each sample was calculated using Bruggeman effective medium approximation. The sp³ C fraction of each sample was quantified by using electron energy-loss spectroscopy (EELS). The blood compatibility of the samples was evaluated by tests of platelet adhesion, kinetic clotting time and thrombin time. The quantity and morphology of the adherent platelets on the surface of these samples were investigated using scanning electron microscopy. Results show that the spectroscopic ellipsometry is a helpful method to evaluate the sp³ carbon fraction of the carbon films. The substrate bias voltage has an obvious effect on sp³ content and blood compatibility of ta-C:H films. The sample prepared with substrate bias voltage of − 20 V showed the best blood compatibility. A simple bio-physical hypothetical model was proposed to explain the experiment results.     

Bi2223超导带材的机械性能的改善

通过在超导芯部引入Ag合金的方法制备了新结构单芯和多芯带材，并研究了此种带材机械性能，以及其相对于普通Bi-2223超导带材变化。这种新结构提高了Bi-2223超导带材抗拉伸应变的能力。在拉伸应力的作用下，单芯样品的屈服强度和σ0.2不可逆应变极限εirr和普通样品相比均有较大幅度的提高，其中的最大不可逆应变极限εirr约为0．32％，最大屈服强度σ0.2约为85MPa。多芯样品的最大不可逆应变极限εirr约为1．1％，最大屈服强度σ0.2约为160MPa。实验证明添加合金丝提高了纯银包套多芯带材的不可逆应变极限εirr，并减弱了临界电流的退化速度。但对合金包套的带材影响不大，这时合金包套对于带材的力学性能起主要作用。     

锯床的数字化改造

为了提高老式带锯床的精度和自动化程度，对锯床的角度测量部分进行了数字化改造。经过改造，锯床的精度得到了提高，可精确地测量和显示转台所在的角度；同时，通过对驱动控制部分的简单设计，可使锯床在键盘输入角度信号后，控制转台自动地转到此位置。     

机床圆柱结合部的动态特性解析方法

在机床图纸设计阶段，预测机床整机的动态特性具有十分重要的意义，进行机床整机动态特性预测的难点在于如何确定结合部的刚度和阻尼参数，本文以机床结构中应用较普遍的圆柱结合部为例，研究了基于结合面基础特性参数的圆柱结合部动态特性解析方法，并编制相应解析软件，给出应用实例，证明本文的方法及软件是正确的。     

稀土含量对喷熔层组织及耐蚀性的影响

本文通过在镍基自熔合金粉末中加入不同含量的稀土，研究了稀土含量对喷熔层组织及耐蚀性的影响规律及其作用机制。结果表明，在喷熔材料中加入适量稀土，可使喷熔层组织细化、晶界净化，从而使腐蚀过程中的表面活性点减少，耐蚀性提高。     

Ti-25V-15Cr-2Al-2Mo-0.2C阻燃β钛合金的蠕变变形结构研究

采用TEM技术研究了具有不同热处理组织的Ti-25V-15Cr-2A1-2Mo-0．2C合金存在540℃，250MPa，100h蠕变作用后的变形结构。结果表明：位错环组是合金蠕变变形结构中的典型位错组态；合金的蠕变抗力随β基本上弥散分布的第二相析出数量的增加而提高。添加微量能提高蠕变抗力的合金元素，如Si元素等，是改善合金蠕变性能的可行途径。