基于多媒体应用的安全研究

网络的迅猛发展,让多媒体的应用更加广泛,多媒体的安全问题受到了越来越多的关注。本文首先对安全的相关技术进行了详细分析,描述了PKI/PMI技术及XML安全技术;其次对多媒体应用的安全框架进行了详细的分析和论述,将其分为三个层次模块,对每个模块进行初步的介绍;最后对部分模块的实现进行了分析。本文对于研究IT安全和多媒体工作人员有着积极的作用。     

Development of the heat treatment system for the 40 T hybrid magnet superconducting outsert

The heat treatment of Nb(3)Sn coil with the glass fabric insulation is one of the key and critical processes for the outsert solenoids of the 40 T hybrid magnet, which could be wound with cable-in-conduit conductors using the insulation-wind-and-react technique. The manufacturing of the large vertical type vacuum/Ar atmosphere-protection heat treatment system has been completed and recently installed in the High Magnetic Filed Laboratory, Chinese Academy of Sciences. The heat treatment system composed mainly the furnace, the purging gas supply system, the control system, the gas impurities monitoring system, and so on. At present, the regulation and testing of the heat treatment system has been successfully finished, and all of technical parameters meet or exceed specifications.     

Dynamic isotropic design of a class of Gough-Stewart parallel manipulators lying on a circular hyperboloid of one sheet

This paper proposes an optimal design method based on dynamic isotropy conditions of a generalized natural frequency matrix in task space for a standard Gough-Stewart parallel manipulator (GSPM). Firstly, the dynamic isotropy conditions are discussed and presented. Next, it is proved that standard GSPMs lie on a circular hyperboloid of one sheet. Further, we present a method to use a circular hyperboloid to construct 3-3-, 6-3- and 6-6-type standard GSPMs. Moreover, such novel definition is used to examine various dynamic isotropy conditions as functions of the coefficients of a hyperboloid. An optimal design method is also proposed accordingly. Finally, a numerical example is given to illustrate the design procedures. The results are very close to the complete dynamic isotropy.     

一种强制访问控制机制的审计方法

目前的安全操作系统模型有很多,以SELinux安全模型,AppArmor安全模型等为大家所熟知,基于这些强制访问控制模型的审计机制也更有不同。本文提供了一种基于轻量级DTE安全模型的审计机制,该机制中的审计信息采用固定大小格式,这样方便对其进行操作。该审计机制有效的监控了系统中主体对客体的所有访问,包括作法用户的操作和合法用户的误操作等。在系统自带的审计机制中,审计信息是系统中所有的审计记录的集合,数量相当庞大,不利于进行分析。本文提出审计开关,对审计记录中的数据进行分类处理,大大提高了检索和查找的速度。     

Adaptive detection of range-spread targets without secondary data in multichannel autoregressive process

Adaptive detection of range-spread targets without secondary data is addressed in a multichannel autoregressive Gaussian disturbance with unknown space–time covariance matrix, by utilizing the Rao test. The proposed Rao test without secondary data is theoretically proved to be asymptotically (large-sample in the number of temporal observations) constant false alarm rate with respect to unknown space–time covariance matrix, thanks to an asymptotic equivalence between the Rao test and the generalized likelihood ratio test. Moreover, the performance loss due to no secondary data can be remedied by appropriately increasing the temporal dimension. The performance assessment conducted by Monte Carlo simulation, also in comparison with the existing detector without secondary data, confirms the effectiveness of the proposed detectors.     

Sampling average approximation method for a class of stochastic Nash equilibrium problems

We consider a class of stochastic Nash equilibrium problems (SNEP). Under some mild conditions, we reformulate the SNEP as a stochastic mixed complementarity problem (SMCP). We apply the well-known sample average approximation (SAA) method to solve the SMCP. We further introduce a semismooth Newton method to solve the SAA problems. The comprehensive convergence analysis is given as well. In addition, we demonstrate the proposed approach on a stochastic Nash equilibrium model in the wholesale gas–oil markets.     

On the Accuracy of Packet Delay Estimation in Distributed Service Networks

Packet delay (either one-way time or round-trip time) is a very important metric for measuring the performance of networks in a highly dynamic environment such as the Internet. Many network applications are also sensitive to packet delay or delay variation for ensuring an acceptable level of quality in providing network-based services such as VoIP, multimedia streaming, etc. A very important property of packet delay is that it is very dynamic and therefore should be measured frequently with measurement results being updated on a timely basis. Measurement of packet delay has thus generated a great deal of interest in the past years and a lot of research has been performed in the development of measurement architecture as well as specific measurement techniques. However, how to reduce network overhead resulting from measurement while achieving a reasonable level of accuracy still remains a challenge. In this paper, we propose to use delay estimation as an alternative to delay measurement for reducing measurement overhead and, in particular, examine the level of accuracy that delay estimation can achieve. With delay estimation, measurement nodes can be dynamically selected and activated and other nodes can share measurement results by performing delay estimation, thus reducing measurement overhead while supporting the dynamic requirement for delay measurement. Consequently, while measurement overhead can be reduced by activating only a subset of network nodes to perform actual measurement, desired accuracy can be achieved by exploring the correlation between delays as well as by sharing measurement results to do delay estimation based on such a correlation. We illustrate how packet delays of network nodes can correlate to each other based on topological properties and show how delays can be estimated based on such a correlation to meet accuracy requirements, which would make delay measurement in the Internet highly dynamic and adaptable to the accuracy requirements and measurement results highly reliable. We also show how delay estimation can be applied by presenting three application scenarios as well as an example to demonstrate the usefulness and effectiveness of delay estimation in the measurement of packet delays.     

An efficient joint channel assignment and QoS routing protocol for IEEE 802.11 multi-radio multi-channel wireless mesh networks

With the emerging of video, voice over IP (VoIP) and other real-time multimedia services, more and more people pay attention to quality of service (QoS) issues in terms of the bandwidth, delay and jitter, etc. As one effective way of broadband wireless access, it has become imperative for wireless mesh networks (WMNs) to provide QoS guarantee. Existing works mostly modify QoS architecture dedicated for ad hoc or sensor networks, and focus on single radio and single channel case. Meanwhile, they study the QoS routing or MAC protocol from view of isolated layer. In this paper, we propose a novel cross-layer QoS-aware routing protocol on OLSR (CLQ-OLSR) to support real-time multimedia communication by efficiently exploiting multi-radio and multi-channel method. By constructing multi-layer virtual logical mapping over physical topology, we implement two sets of routing mechanisms, physical modified OLSR protocol (M-OLSR) and logical routing, to accommodate network traffic. The proposed CLQ-OLSR is based on a distributed bandwidth estimation scheme, implemented at each node for estimating the available bandwidth on each associated channel. By piggybacking the bandwidth information in HELLO and topology control (TC) messages, each node disseminates information of topology and available bandwidth to other nodes in the whole network in an efficient way. From topology and bandwidth information, the optimized path can be identified. Finally, we conduct extensive simulation to verify the performance of CLQ-OLSR in different scenarios on QualNet platform. The results demonstrate that our proposed CLQ-OLSR outperforms single radio OLSR, multi-radio OLSR and OLSR with differentiated services (DiffServ) in terms of network aggregate throughput, end-to-end packet delivery ratio, delay and delay jitter with reasonable message overheads and hardware costs. In particular, the network aggregate throughput for CLQ-OLSR can almost be improved by 300% compared with the single radio case.     

Enhancing social media competitiveness of small businesses: insights from small pizzerias

Social media provide an online platform for enterprises to engage existing customers and attract new customers. Although social media can be easily set up at no cost, however, due to limited human and financial resources, many small businesses find it challenging to compete against large enterprises in social media use. While more and more small businesses have jumped on the bandwagon of social media in recent years, few studies investigated the social media strategies that can help small businesses to survive and even thrive against large competitors in the social media arena. Therefore, we studied 32 small pizzerias in a mid-size U.S. city in terms of their social media use for business. Our study found that small pizzerias emphasizing social media use on community relations and social responsibility tend to be more successful in attracting and engaging local customers. This study also sheds light on both effective strategies and successful practices of social media use by small pizzerias. The insights and recommendations identified from this study can help small businesses to enhance their social media competitiveness against large enterprises.