Chemistry and Physics of Alkali Metals on MoS2 Surfaces

The interaction of alkali metal with surfaces has been of great interest to the community of catalysis since alkali metal can play an important role as a promoter. On alkali-doped MoS₂, such a promotion effect of alkali metal has been exemplified in the direct synthesis of linear alcohols from CO and H₂, where the alkali-doping switches the catalyst selectivity from methanation to alcohol synthesis. This paper reviews recent high-resolution X-ray photoelectron spectroscopy experiments that have provided direct observation of electron transfer from alkali metals to a model single crystal MoS₂ and the capture of the supra-valence electrons in the subsequent oxidation reactions.     

Microwave techniques for diagnostic laboratories

Microwaves (MWs) were first introduced as a method of fixation just over 20 years ago. In recent years their use has extended far beyond that of a safe, clean and rapid method of fixation of tissue blocks and large specimens, including brains. MWs accelerate the action of cross-linking fixatives and can greatly accelerate the various stages of tissue processing to produce a paraffin block in 30 min. An extensive range of ultrafast MW-stimulated special stains has been developed, and immunohistochemical procedures can be completed in 20 min by employing MWs. Cellular antigens are distinctly better preserved in tissues fixed by MWs than by conventional cross-linking fixatives. Also, the cytomorphology of cryostat sections irradiated in Wolman's solution is clearly improved. MWs can similarly be applied for fixation and staining of preparations for transmission and scanning electron microscopy, and they also greatly accelerate polymerisation of resins. In the current climate of cost containment, this wide range of applications makes the MW oven an invaluable addition to the diagnostic laboratory.     

Comment on raindrop size distribution model

The parameter set for the exponential raindrop size distribution model presented by Yeo, Kooi and Leong (see ibid. vol.41, P.709, 1993) was derived using a data set measured in Singapore. A limitation to the model is that it is accurate only for small rain rate or when the rain medium consists predominantly of small droplets with diameter D is < λ/π . A new parameter set that enables accurate computation of rain attenuation for droplets with diameter D = λ/π has since been derived using the same data set. This new parameter set has been proven to be more accurate in the computation of rain attenuation     

在线近红外光谱分析仪在汽油自动调合系统中的应用

在线近红外光谱分析仪可以实时测定汽油调合组分及成品油的多种物化性质指标如烯烃、芳烃、苯及氧化物含量、辛烷值（RON、MON）、馏程、蒸气压等。文章介绍了用于汽油自动调舍工艺中的在线近红外光谱分析仪的原理、系统组成和特点，以及在国内外的汽油调合优化控制中的实际应用情况。典型的应用实例表明，将该分析仪用于汽油自动调合工艺中，可为炼油厂带来可观的经济效益和社会效益。     

Real-time palmprint acquisition system design

Capturing high quality palmprint images in a very short time period is a fundamental step in palmprint research. While a palmprint scanner capable of this function is especially important for developing a real-time online palmprint identification system, limited research effort has been put into designing and implementing palmprint acquisition systems. A novel palmprint acquisition system is presented, which is designed for various civilian applications such as access control, ATM, etc. The novel contactless design on the user interface prevents the distortion of the palm skin introduced by the traditional glass plate of a palm scanner. The system is designed to have the best performance at reasonable price. It has a resolution of 150 dpi that is able to obtain palmprint features, including the principal lines, wrinkles and ridge texture. The proposed system provides an important step for implementing a personal identification system using palmprint. Over 9,400 palmprint images were collected by the proposed system. An online palmprint identification system was then developed based on the proposed acquisition system.     

氨合成塔出口氨含量偏低原因分析及对策

阐述UHDE合成塔运行现状 ,分析氨净值达不到设计值的原因 ,提出相应的解决措施     

Speed–accuracy tradeoff in Fitts’ law tasks—on the equivalency of actual and nominal pointing precision

Pointing tasks in human–computer interaction obey certain speed–accuracy tradeoff rules. In general, the more accurate the task to be accomplished, the longer it takes and vice versa. Fitts’ law models the speed–accuracy tradeoff effect in pointing as imposed by the task parameters, through Fitts’ index of difficulty (I_d) based on the ratio of the nominal movement distance and the size of the target. Operating with different speed or accuracy biases, performers may utilize more or less area than the target specifies, introducing another subjective layer of speed–accuracy tradeoff relative to the task specification. A conventional approach to overcome the impact of the subjective layer of speed–accuracy tradeoff is to use the a posteriori “effective” pointing precision W_e in lieu of the nominal target width W. Such an approach has lacked a theoretical or empirical foundation. This study investigates the nature and the relationship of the two layers of speed–accuracy tradeoff by systematically controlling both I_d and the index of target utilization I_u in a set of four experiments. Their results show that the impacts of the two layers of speed–accuracy tradeoff are not fundamentally equivalent. The use of W_e could indeed compensate for the difference in target utilization, but not completely. More logical Fitts’ law parameter estimates can be obtained by the W_e adjustment, although its use also lowers the correlation between pointing time and the index of difficulty. The study also shows the complex interaction effect between I_d and I_u, suggesting that a simple and complete model accommodating both layers of speed–accuracy tradeoff may not exist.     

Flame retardant and the degradation mechanism of high impact polystyrene/Fe-montmorillonite nanocomposites

High impact polystyrene/Fe-montmorillonite (HIPS/Fe-MMT) nanocomposites were successfully prepared by melting intercalation. The nanostructures of HIPS/Fe-MMT were testified by X-ray diffraction (XRD) and transmission electron microscope (TEM). Corresponding to pure HIPS, the thermal stability of HIPS/Fe-MMT nanocomposites was notably improved. The peaks of heat release rate (PHRR) and the mass loss rate (MLR) were significantly reduced after the formation of the HIPS/Fe-MMT nanocomposites from cone calorimetry. And nanocomposites PHRR was further lower with the increase of Fe-MMT content in the range of 1 to 5 wt%. The degradation mechanism of HIPS and HIPS/Fe-MMT nanocomposites was conducted by pyrolysis gas chromatography mass spectrometry (Py-GC-MS). And the reason of the enhancement of thermal stability maybe is that structural iron is the operative site for radical trapping in the Fe-MMT and the nanostructure enhances the interaction of the chains of the HIPS.     

超低碳奥氏体不锈钢00Cr18Ni10还原脱磷研究

在 2 5kg真空感应炉上用镁钙合金对超低碳奥氏体不锈钢 0 0Cr18Ni10进行了还原脱磷试验。通过充入工业纯氩使炉内压力为 6 6 .6 6kPa和精炼时的反应温度 14 5 0～ 15 0 0℃ ,加入镁钙合金 5 0kg t和助熔剂CaF2 11kg t,可使精炼后 0 0Cr18Ni10的磷含量进一步降低到 (5 0～ 6 0 )× 10 - 6 ,钢中氧、硫含量分别稳定降到(4～ 6 )× 10 - 6 和 15× 10 - 6 。     

西气东输工程用X70热轧板卷屈服强度检测值波动大的探讨

对西气东输工程用X70热轧板卷检验过程中出的屈服强度σ0.5波动大的情况进行了分析，认为拉伸试样弯曲是主要原因。这一问题可通过反复压平试样，确保试样的平直度以及适当提高钢的强度的方法加以解决。