Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.     

Control of calcium hexaluminate grain morphology in in-situ toughened ceramic composites

The influence of processing conditions on the morphology of calcium hexaluminate (CA₆) grains in Al₂O₃: 30 vol% CaO·6Al₂O₃ (CA₆) ceramic composites was investigated. Specimens were prepared by in-situ reaction sintering using precursor powders of alumina, and either calcium carbonate or calcium oxide. In some samples, 1 vol% anorthite glass was added as a sintering aid. X-ray diffraction was used to study the phase development in the as-calcined and sintered states. The resultant microstructures were characterized using both scanning electron microscopy (SEM), and imaging secondary ion mass spectrometry (SIMS). It was found that the CA₆ grains developed a platelike morphology when CaCO₃ was used as the starting calcium-rich powder. In contrast, samples prepared using CaO resulted in equiaxed CA₆ grains. This result was observed to be independent of the anorthite glass addition. The findings are rationalized in terms of distinct CA₆ reaction mechanisms, resulting from differences in the reactivity of the powders during the early stages of calcining.Cement Nomenclature C CaO - A Al₂O₃     

Multiple negative-differential-resistance (MNDR) phenomena of ametal-insulator-semiconductor-insulator-metal (MISIM)-like structurewith step-compositioned InxGa1-xAs quantum wells

In this paper, a new multiple negative-differential-resistance (MNDR) device based on a metal-insulator-semiconductor-insulator-metal (MISIM)-like structure with step-compositional In_xGa_1-x As quantum wells has been fabricated and demonstrated. The interesting MNDR phenomena are found in the current-voltage (I-V) characteristics of this device. At room temperature, the triple switching behaviours and quadruple stable operation states are obtained. In addition, the sixfold switching behaviors and a staircase-shaped I-V characteristic are observed at -105°C. A sequential carrier accumulation at InGaAs subwells and the potential lowering process are used to qualitatively explain the interesting MNDR phenomena. From the experimental results, it is shown that the studied device has good potential in multiple-valued logic applications     

Ethnic differences in the length of the menstrual cycle during the postmenarcheal period

In 1989, 125 African-American and 123 European-American girls aged 12-14 years were enrolled in a 2-year study in which they maintained a menstrual calendar, recording the date and amount of menstrual bleeding. Weight, exercise, and stress during the previous week were recorded at the start of each menstrual cycle. Although only minor ethnic differences were observed in expected cycle length (29.3 vs. 28.8 days for European-American and African-American girls, respectively), more prominent differences were observed in the between-subjects standard deviation of cycle length (2.9 vs. 2.2 days, respectively) and in the odds of having a cycle longer than 45 days (odds ratio=1.86, 95% confidence interval 1.17-2.97) for European-American compared with African-American girls. Low weight for height and high levels of exercise increased the probability of having a cycle longer than 45 days and decreased expected cycle length of 13- to 45-day cycles. Additional investigation of potential ethnic differences in menstrual cycle characteristics is warranted.     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

Peripheral nerve stimulation in a whole-body echo-planar imaging system

Echo-planar techniques in MRI use a rapidly oscillating frequency-encoding gradient with the potential to produce peripheral nerve stimulation. To evaluate the incidence, type, and location of stimulation in a commercial whole-body scanner, we studied two groups: (a) 173 consecutive individuals scanned by echo-planar imaging for other purposes and (b) seven subjects who were scanned with an extensive set of 36 echo-planar sequences (with prompting after each scan to report any peripheral nerve stimulation) to test the effects of various parameters. Although only 5% of group A reported symptoms of peripheral nerve stimulation, all in group B experienced some type of stimulation, dependent primarily on direction of the oscillating gradient and location of the body within the gradient coil. Maximum stimulation typically occurred 30 to 40 cm from isocenter in the region of maximum dB/dt. Generally, y gradients produced truncal stimulation, and x gradients produced stimulation in the head. When hands were clasped over the abdomen, a tingling in the hands occasionally was felt. Patients should be instructed to keep their hands apart.     

氧化铝/锌合金复合材料界面的SEM观察

利用挤压铸造制备氧化铝／锌合金复合材料，在扫描电镜（ＳＥＭ）上观察复合材料的界面。结果表明，在复合材料中纤维与基体间存在致密界面层，合金元素通过适当的化学反应可改善纤维与基体间的结合；在凝固过程中，纤维／基体界面上的硅在共晶体的共生生长过程中起了领先相作用，导致复合材料的共晶转变是由铝硅共晶转变和锌铝共晶转变两者组成。     

ATM网络的可用比特率业务

本文介绍了可用比特率业务的业务特点，速率控制机制以及该业务存在的问题。     

电离层时域探测方法

给出了各向同性分层半空间等离子体对时域电磁脉冲后向散射的有关公式，得出了反抛物层时域响应的解析表达式，并利用时频分析方法演出了电子密度分布。     

Lamp configuration design for rapid thermal processing systems

We have studied lamp configuration design for rapid thermal processing (RTP) systems. We considered a configuration consisting of four concentric circular lamp zones, three of them above the wafer and one circumventing the wafer. We propose a method to determine the geometric parameters, the width, height and radius, of the lamp zones so that the configuration designed has the capacity to achieve a uniform temperature on the wafer. The method is based on a necessary and sufficient condition for uniform temperature tracking and analytic expressions of the view factors. A design example is given in which a least square open-loop control law yields good temperature uniformity