Two-stage quasi-class-E power amplifier in GaN HEMT technology

This letter presents a two-stage quasi-class-E monolithic microwave integrated circuit power amplifier at 2.0GHz, which is based on field-plated GaN high electron mobility transistor technology. It consists of a driver stage and a power stage. The circuit schematic is described. The amplifier achieves an output power of 37.5dBm into a 50-/spl Omega/ load, a power added efficiency (PAE) of 50%, and a gain of 18.2dB. A power density of 5.6W/mm is achieved.     

Countermeasures for Primary User Emulation Attack: A Comprehensive Review

Wireless Personal Communications - Cognitive radio (CR) is a flexible wireless network that can solve the scarcity and underutilization problem of the spectrum by permitting unlicensed users to...     

Targeting Efficiency and Biodistribution of Zoledronate Conjugated Docetaxel Loaded Pegylated PBCA Nanoparticles for Bone Metastasis

In an attempt to improve tumor localization of docetaxel (DTX)‐loaded nanoparticles (NPs), zoledronic acid (ZOL) is used as a ligand to target bone metastasis. DTX‐loaded ZOL‐conjugated polyethylene glycol (PEG)ylated polybutyl cyanoacrylate (PBCA) NPs are prepared using an anionic polymerization technique. PBCA‐PEG‐ZOL NPs are subjected to cytotoxic assay in both BO2 and MCF‐7 cell lines. Cell cycle arrest and apoptosis induced by the PBCA‐PEG‐ZOL NPs are studied. Quantitative cellular uptake, NP uptake route characterization, confocal microscopy and IPP/ApppI levels are performed. PBCA‐PEG‐ZOL NPs show an enhanced cytotoxic effect in both BO2 as well as MCF‐7 cell lines due to higher uptake following ZOL‐mediated endocytosis. The molecular basis of apoptosis reveals the involvement of a cytoplasmic protein in activating the programmed cell death pathway. Route characterization studies reveal that PBCA‐PEG‐ZOL NPs uptake is not completely blocked even by using both inhibitors (genistein and phenyl arsinoxide) simultaneously, conferring that uptake is not entirely based upon clathrin or caveolae. PBCA‐PEG‐ZOL NPs showed 7 and 5.3 times increase in IPP and ApppI production, in comparison to ZOL treatment, and 138 times higher than the control group in MCF‐7 cell line. In BO2 cell line, after treatment with NPs, IPP was 5.35 times higher than ZOL solution. No ApppI in BO2 cell line after treatment with NPs and ZOL solution was found. NP distribution in tumor infected bone is also significantly high in comparison to the normal bone at any time point. It is concluded that ZOL‐conjugated NPs provide an efficient and targeted delivery of DTX, with synergistic effects. Thus, these NPs present a promising treatment in the near future, by actively targeting metastatic tumor.     

Energy balanced data gathering approaches,issues and research directions

Telecommunication Systems - Wireless sensor networks (WSNs) and Internet of Things domain comprise of numerous small sized battery powered sensor nodes. Energy efficiency and energy balancing are...     

Detect and avoid: an ultra-wideband/WiMAX coexistence mechanism [Topics in Radio Communications]

Cognitive radios have been advanced as a technology for the opportunistic use of underutilized spectrum wherein secondary devices sense the presence of the primary user and use the spectrum only if it is deemed empty. Spectral cognition of this form can also be used by regulators to facilitate the dynamic coexistence of different service types. An example of this is the operation of ultra-wideband devices in WiMAX bands: UWB devices must detect and avoid WiMAX devices in certain regulatory domains. In this article we start by discussing various options for detection and avoidance. We then describe the obstacles faced in achieving robust detection and avoidance with an on-chip implementation of basic DAA functionality. Finally, we present measurement results for operation of a single UWB device with a WiMAX system. This interaction also highlights the problem of dealing with listen before speak primaries where secondary transmission could interfere by blocking the primary's access to the medium.     

Tailoring of Electromagnetic Absorption in Substituted Hexaferrites from 8.2 GHz to 12.4 GHz

Journal of Electronic Materials - Microwave absorbers are an important topic of interest to mitigate electromagnetic interference. Here, we have investigated electromagnetic absorption properties...     

AlGaN/GaN heterojunction bipolar transistor

We demonstrate the first GaN bipolar transistor. An AlGaN/GaN HBT structure was grown by MOCVD on c-plane sapphire substrate. The emitter was grown with an Al_0.1Ga_0.9N barrier to increase the emitter injection efficiency. Cl₂ RIE was used to pattern the emitter mesa, and selectively regrown base contact pads were implemented to reduce a contact barrier associated with RIE etch damage to the base surface. The current gain of the devices was measured to be as high as three with a base width of 200 nm. DC transistor characteristics were measured to 30 V V_CE in the common emitter configuration, with an offset voltage of 5 V. A gummel plot and base contact characteristics are also presented     

Analysis of L-Shaped Slot Loaded Circular Disk Patch Antenna for Satellite and Radio Telecommunication

In the present paper a dual frequency resonance antenna is achieved by introducing L- shaped slot in circular disk patch. It is analysed by using circuit theory concept. The resonance frequency is found to be 5.087 and 8.455 GHz and the 10 dB bandwidth of the proposed antenna for lower and upper resonance frequency is found to be 4.39 and 4.66 % respectively. It is easy to adjust the higher and lower band by changing the dimensions of notch and slot introduced in the antenna. The frequency ratio is found to be 1.6621. The gain and efficiency of the proposed antenna is found to be 9.50 dB at lower resonance however it is 7.0 dB at upper resonance frequency whereas the efficiency at lower and upper resonance is found to be 94.6 and 88.2 %.The theoretical results are compared with IE3D simulation results which are in good agreement.     

Pure Blue Electroluminescence by Differentiated Ion Motion in a Single Layer Perovskite Device

Blue electroluminescence is highly desired for emerging light-emitting devices for display applications and optoelectronics in general. However, saturated, efficient, and stable blue emission has been challenging to achieve, particularly in mixed-halide perovskites, where intrinsic ion motion and halide segregation compromises spectral purity. Here, CsPbBr_3−xCl_x perovskites, polyelectrolytes, and a salt additive are leveraged to demonstrate pure blue emission from single-layer light-emitting electrochemical cells (LECs). The electrolytes transport the ions from salt additives, enhancing charge injection and stabilizing the inherent perovskite emissive lattice for highly pure and sustained blue emission. Substituting Cl into CsPbBr₃ tunes the perovskite luminescence from green through blue. Sky blue and saturated blue devices produce International Commission on Illumination coordinates of (0.105, 0.129) and (0.136, 0.068), respectively, with the latter meeting the US National Television Committee standard for the blue primary. Likewise, maximum luminances of 2900 and 1000 cd m⁻², external quantum efficiencies (EQEs) of 4.3% and 3.9%, and luminance half-lives of 5.7 and 4.9 h are obtained for sky blue and saturated blue devices, respectively. Polymer and LiPF₆ inclusion increases photoluminescence efficiency, suppresses halide segregation, induces thin-film smoothness and uniformity, and reduces crystallite size. Overall, these devices show superior performance among blue perovskite light-emitting diodes (PeLEDs) and general LECs.