Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

Correlation between synthesis conditions, coherently diffracting domain size and cubic phase stabilization in barium titanate

The Constant Rate Thermal Analysis method has been used under different experimental conditions to obtain barium titanate powder of very small grain size. Both a crystallographic and a dielectric study ham been carried out on samples sintered at different temperatures. It is deduced that the formation of small coherently diffracting domains is improved by the generation of oxygen vacancies and the cubic phase stabilization depends on the coherently diffracting domain size rather than on the particle size.     

Some further observations on the differentiation method of modalreduction

The differentiation method of model reduction is shown to be equivalent to forming successive ratios of multipoint Taylor polynomial approximation of the numerator and denominator of the transfer function, respectively. This reformulation allows the method to be applied entirely through a Routh-type array structure. Strong links are seen to exist between the method and other stability preserving methods via this Routh-type structure     

Two distinct DNA ligase activities in mitotic extracts of the yeast Saccharomyces cerevisiae

Four biochemically distinct DNA ligases have been identified in mammalian cells. One of these enzymes, DNA ligase I, is functionally homologous to the DNA ligase encoded by the Saccharomyces cerevisiae CDC9 gene. Cdc9 DNA ligase has been assumed to be the only species of DNA ligase in this organism. In the present study we have identified a second DNA ligase activity in mitotic extracts of S. cerevisiae with chromatographic properties different from Cdc9 DNA ligase, which is the major DNA joining activity. This minor DNA joining activity, which contributes 5-10% of the total cellular DNA joining activity, forms a 90 kDa enzyme-adenylate intermediate which, unlike the Cdc9 enzyme-adenylate intermediate, reacts with an oligo (pdT)/poly (rA) substrate. The levels of the minor DNA joining activity are not altered by mutation or by overexpression of the CDC9 gene. Furthermore, the 90 kDa polypeptide is not recognized by a Cdc9 antiserum. Since this minor species does not appear to be a modified form of Cdc9 DNA ligase, it has been designated as S. cerevisiae DNA ligase II. Based on the similarities in polynucleotide substrate specificity, this enzyme may be the functional homolog of mammalian DNA ligase III or IV.     

Augmented rectangular load flow model

This paper presents some improvements to the load flow solution in rectangular coordinates. First, in an attempt to use as linear a model as possible, both the nodal equations and the bus constraints are retained. The Newton-Raphson (NR) method is then applied to the enlarged set of equations, and written in terms of bus voltages and currents. This scheme, combined with a simple procedure to handle PV buses, leads to a computationally efficient algorithm, particularly advantageous in the presence of zero-injection buses. Experimental results are provided comparing the performance of the proposed approach with that of the conventional formulation     

Peripheral noxious stimulation induces CREM expression in dorsal horn: involvement of glutamate

Thermal washout curves have been proposed as noninvasive tools for analysing lower airway dimensions and pulmonary blood flow, but how upper airway heat transfer affects these washout curves is unclear. The present study was designed to compare extrathoracic and tracheobronchial contributions to thermal washout curves. Respiratory frequency, air ambient temperature, and body core temperature (tc) were varied in six male subjects before and after immersion in cold (1.1 degrees C) water for up to 2 h under three conditions: 1) control: ambient temperature (tamb) = 25 degrees C, rectal temperature change (delta tre) = 0 degrees C; 2) pre-immersion: tamb = 4 degrees C, delta tre = 0 degrees C; and 3) post-immersion: tamb = 25 degrees C, delta tre = -0.7 degrees C. Both peak expiratory nasal (tpn) and oral (tpo) airstream temperatures were measured. Each subject was tested twice. Expiratory tpo was generally higher than tpn in all conditions. Increasing breathing rates lowered tpn and tpo in the control and cold air environments. Orifice temperatures, which are presumed to reflect upper airway blood temperatures, correlated with both tpn and tpo. Lowering tc had no effect on washout curves during quiet breathing and affected only tpn during rapid breathing. The results suggest that while tracheobronchial conditions may contribute to thermal washout curves, extrathoracic conditions predominate. Strong correlations between orifice temperatures, peak expiratory nasal temperatures and peak expiratory oral temperature demonstrate the dominant role of upper airway heat exchange in determining thermal washout curves.     

A new low-energy ion implanter for bombardment of cylindrical surfaces

An ion implanter of cylindrical geometry is described suitable for uniform implantation at a few keV of inert gas ions of narrow energy distribution into conducting targets of axial symmetry. For helium implantation the ion current in the present device can easily be maintained at over 1 mA, allowing high dose implantation of large areas (several tens of cm²) in minutes. For temperature control of the target, a thermal shunt is incorporated. The sizes and the implantation energy of the device are scalable. Reactive gases can also be implanted with the device when operated at lower pressures and ion currents.     

Nonlinear distortion generated by DSF-based optical-phase conjugators in analog optical systems

In this paper, the nonlinear distortion induced by dispersion-shifted-fiber-based optical-phase conjugators (OPCs) in intensity-modulated subcarrier multiplexing optical systems is evaluated. In this study, it is shown that the nonlinear distortion mainly arises from the four-wave mixing (FWM) process during the phase conjugation, although there also exists influences from other nonlinear effects. Closed expressions for calculating the second- and third-order harmonic distortions due to FWM, self-phase modulation, cross-phase modulation and group-velocity dispersion effects in the dispersion-shifted-fiber-based OPC are also reported for the first time. The influence of several system design parameters, such as the optical modulation index, the number of channels, the input optical powers, and the effective area of the dispersion-shifted fiber on the compensation of fiber-induced nonlinear distortions employing the optical-phase conjugation technique, is considered.     

Invasive angiology in acute arterial pathology in a critically ill newborn infant

Four patients who complained of symptoms and signs compatible with biliary tract disease and in whom the diagnosis of gallbladder (three cases) and common bile duct ascariasis (one case) was made sonographically are reported. In two patients with gallbladder ascariasis, cholecystectomy corroborated the presence of the round-worms, and was curative. The third patient was a pregnant woman (32nd gestational week) who took piperazine citrate, and a second sonogram performed 29 days later was completely normal. The fourth patient with common bile duct ascariasis underwent choledochotomy with extraction of one ascaris lumbricoides from the common duct, and a T tube was left in place for 15 days. All patients received antiparasitics and had a favorable outcome. Ultrasonography is an important noninvasive diagnostic procedure in the work-up of these patients, who usually describe a clinical picture suggesting gallstone disease: this is especially true in the presence of pregnancy.