Truncated Analogues of a G-Quadruplex-Forming Aptamer Targeting Mutant Huntingtin: Shorter Is Better!

Two analogues of the MS3 aptamer, which was previously shown to have an exquisite capability to selectively bind and modulate the activity of mutant huntingtin (mHTT), have been here designed and evaluated in their physicochemical and biological properties. Featured by a distinctive propensity to form complex G-quadruplex structures, including large multimeric aggregates, the original 36-mer MS3 has been truncated to give a 33-mer (here named MS3-33) and a 17-mer (here named MS3-17). A combined use of different techniques (UV, CD, DSC, gel electrophoresis) allowed a detailed physicochemical characterization of these novel G-quadruplex-forming aptamers, tested in vitro on SH-SY5Y cells and in vivo on a Drosophila Huntington’s disease model, in which these shorter MS3-derived oligonucleotides proved to have improved bioactivity in comparison with the parent aptamer.     

Preparation by flame spray pyrolysis of ABO3±δ catalysts for the flameless combustion of methane

Perovskitic mixed oxides prepared through flame-spray pyrolysis possess a good stability in high-temperature application, viz. the catalytic flameless combustion of methane. Some preparation operating parameters are here analysed, such as O₂ pressure drop along the spraying nozzle, O₂ discharge velocity and flow rate. These parameters have been correlated with specific surface area, activity and durability of the prepared samples, as well as with flame temperature, varied by using different fuel mixtures. It was found that specific surface area increases with increasing O₂ velocity and flow rate and with decreasing the combustion enthalpy of the solvent mixture. This reflects on both activity and durability of the catalyst.     

Study of the M23C6 precipitation at 550°C and 700°C in AISI 304 stainless steel by small angle neutron scattering

An investigation of the M₂₃C₆ carbide (M = metal atom) precipitation induced by ageing at 550°C and 700°C in AISI 304 stainless steel was performed using Small Angle Neutron Scattering (SANS) and Transmission Electron Microscopy (TEM). Coherent scattering cross section curves were obtained for the differently aged samples from which the total surface and total volumes of precipitates per unit volume of sample were determined. The size distribution function of M₂₃C₆ carbide was obtained for each ageing time. The SANS results are in satisfactory agreement with the localized TEM observations.     

Comparison of nine common coffee extraction methods: instrumental and sensory analysis

The preparation of a cup of coffee may vary between countries, cultures and individuals. Here, an analysis of nine different extraction methods is presented regarding analytical and sensory aspects for four espressi and five lunghi. This comprised espresso and lungo from a semi-automatic coffee machine, espresso and lungo from a fully automatic coffee machine, espresso from a single-serve capsule system, mocha made with a percolator, lungo prepared with French Press extraction, filter coffee and lungo extracted with a Bayreuth coffee machine. Analytical measurements included headspace analysis with HS SPME GC/MS, acidity (pH), titratable acidity, content of fatty acids, total solids, refractive indices (expressed in °Brix), caffeine and chlorogenic acids content with HPLC. Sensory analysis included visual, aroma, flavor and textural attributes as well as aftersensation. The technical differences in the extraction methods led to a higher concentration of the respective quantities in the espressi than in the lunghi. Regarding the contents per cup of coffee, the lunghi generally had a higher content than the espressi. The extraction efficiency of the respective compounds was mainly driven by their solubility in water. A higher amount of water, as in the extraction of a lungo, generally led to higher extraction efficiency. Comparing analytical data with sensory profiles, the following positive correlations were found total solids ? texture/body, headspace intensity ? aroma intensity, concentrations of caffeine/chlorogenic acids ? bitterness and astringency.     

Be radioactive beam production at CIRCE and its utilization in basic and applied physics

A pure ⁷Be beam with an energy E = 1-8 MeV is available for nuclear and applied physics at the 3 MV Pelletron tandem accelerator CIRCE in Caserta. The beam is produced using an offline technique. Typical analyzed beam intensities are about 2 ppA, using cathodes with an activity of the order of 200 MBq. The ⁷Be implantation has been used for both fundamental nuclear physics and applied physics. In particular, different metals have been implanted with ⁷Be in order to study the influence of the chemical composition and of the number of quasi-free electrons of the host material on the ⁷Be half-life. In the field of applied physics, the ⁷Be implantation turns out to be very interesting for wear measurement. In fact, in this case ⁷Be is used as a depth-sensitive tracer. The continuous detection of the sample activity during the wear allows a high sensitivity measurement of wearing speed. The ⁷Be beam production at CIRCE, the implantation procedure and the results obtained from the ⁷Be half-life measurements and the wear characterization of implanted steel samples are described.     

Computer aided design algorithm for singly fed circularly polarized rectangular microstrip patch antennas

Based on a resonant cavity model, this work presents an effective computer aided design (CAD) algorithm to design singly fed circularly polarized (CP) rectangular microstrip patch antennas. The CAD algorithm allows precise prediction of the antenna performance. The analysis of radiation pattern, input impedance, and axial ratio parameters confirm the success of the design. The experimental results from a manufactured prototype operating at 2.25 GHz are in good agreement with the CAD predictions. ©1999 John Wiley & Sons, Inc. Int J RF and Microwave CAE 9: 32–41, 1999.     

Ultrastructural Study of Platelet Behavior and Interrelationship in Sprouting and Intussusceptive Angiogenesis during Arterial Intimal Thickening Formation

Platelets in atherosclerosis, bypass stenosis, and restenosis have been extensively assessed. However, a sequential ultrastructural study of platelets in angiogenesis during the early phases of these lesions has received less attention. Our objective was the study of platelets in angiogenesis and vessel regression during intimal thickening (IT) formation, a precursor process of these occlusive vascular diseases. For this purpose, we used an experimental model of rat occluded arteries and procedures for ultrastructural observation. The results show (a) the absence of platelet adhesion in the de-endothelialized occluded arterial segment isolated from the circulation, (b) that intraarterial myriad platelets contributed from neovessels originated by sprouting angiogenesis from the periarterial microvasculature, (c) the association of platelets with blood components (fibrin, neutrophils, macrophages, and eosinophils) and non-polarized endothelial cells (ECs) forming aggregates (spheroids) in the arterial lumen, (d) the establishment of peg-and-socket junctions between platelets and polarized Ecs during intussusceptive angiogenesis originated from the EC aggregates, with the initial formation of IT, and (e) the aggregation of platelets in regressing neovessels (‘transitory paracrine organoid’) and IT increases. In conclusion, in sprouting and intussusceptive angiogenesis and vessel regression during IT formation, we contribute sequential ultrastructural findings on platelet behavior and relationships, which can be the basis for further studies using other procedures.     

Flame-synthesized LaCoO3-supported Pd: 2. Catalytic behavior in the reduction of NO by H2 under lean conditions

A 0.5 wt% Pd/LaCoO₃, prepared by flame-spray pyrolysis (FP), was tested as catalyst for the low-temperature selective reduction of NO by H₂ in the presence of excess O₂. In particular, the effect of the precalcination and prereduction temperature on catalytic activity was compared with that of a similar Pd/LaCoO₃ sample prepared by impregnation with a Pd solution of FP-prepared LaCoO₃. The FP-made catalyst allowed full NO conversion at 150 °C, with 78% selectivity to N₂, thus outperforming the catalytic behavior of the corresponding sample prepared by impregnation. The higher activity of the FP-made catalyst has been attributed to the formation of segregated Co metal particles, not present in the impregnated sample, formed during the precalcination at 800 °C, followed by reduction at 300 °C. Two reaction mechanisms can be deduced from the temperature-programmed experiments. The first of these, occurring at lower temperatures, indicates cooperation between the Pd and Co metal particles, with formation of active nitrates on cobalt, successively reduced by hydrogen spillover from Pd. The second, occurring at higher temperature, allows 50% conversion of NO, with >90% selectivity to N₂, and involves N adatoms formed by dissociative NO adsorption over Pd. Prereduction at 600 °C led to a slight increase in catalytic activity, due to the formation of a PdCo alloy, which is more stable on reoxidization compared with Pd alone. Moreover, the cooperative reaction mechanism seems to be favored by the proximity of Co and Pd in metal particles.     

Automatic on-line monitoring of atmospheric volatile organic compounds: gas chromatography-mass spectrometry and gas chromatography-flame ionization detection as complementary systems

Traditionally air quality networks have been carrying out the continuous, on-line measurement of volatile organic compounds (VOC) in ambient air with GC-FID. In this paper some identification and coelution problems observed while using this technique in long-term measurement campaigns are described. In order to solve these problems a GC-MS was set up and operated simultaneously with a GC-FID for C₂-C₁₁ VOCs measurement.There are few on-line, unattended, long term measurements of atmospheric VOCs performed with GC-MS. In this work such a system has been optimized for that purpose, achieving good repeatability, linearity, and detection limits of the order of the GC-FID ones, even smaller in some cases. VOC quantification has been made by using response factors, which is not frequent in on-line GC-MS. That way, the identification and coelution problems detected in the GC-FID, which may led to reporting erroneous data, could be corrected.The combination of GC-FID and GC-MS as complementary techniques for the measurement of speciated VOCs in ambient air at sub-ppbv levels is proposed. Some results of the measurements are presented, including concentration values for some compounds not found until now on public ambient air VOC databases, which were identified and quantified combining both techniques. Results may also help to correct previously published VOC data with wrongly identified compounds by reprocessing raw chromatographic data.     

Sound influence on landscape values

In order to study the influence of the interaction between visual and acoustic stimuli on perception of the environment, 36 sound and image combinations were presented to 75 subjects. The sounds and images used were of natural and semi-natural settings and urban green space. Affective response was measured in terms of pleasure. The results show a rank of preferences running from natural to man-made sounds, with the nuance of a potential alert or alarm-raising component of the sound. The potential for alert or alarm-raising may be related, over and above the information content or meaning, to the characteristics of the sound frequency spectrum, specifically to the existence of frequency bands whose sound levels impose themselves on the acoustic background. The congruence or coherence between sound and image influences preferences. Coherent combinations are rated higher than the mean of the component stimuli. Results suggest that there is a need to identify places or settings where the conservation of the sound environment is essential, because of its salient informational content or due to the drastic impact of the loss of sound quality on observer appreciation, for example, in urban green spaces, natural spaces and cultural landscapes.