Surface chemistry of tribochemical reactions explored in ultrahigh vacuum conditions

The thermal decomposition of model extreme-pressure lubricant additives on clean iron was studied in ultrahigh vacuum conditions using molecular beam strategies. Methylene chloride and chloroform react to deposit a solid film consisting of FeCl₂ and carbon, and evolve only hydrogen into the gas phase. No gas-phase products and less carbon on the surface are detected in the case of carbon tetrachloride. Dimethyl and diethyl disulfide react on clean iron to deposit a saturated sulfur plus carbon layer at low temperatures (∼600 K) and an iron sulfide film onto a Fe + C underlayer at higher temperatures (∼950 K). Methane is the only gas-phase product when dimethyl disulfide reacts with iron. Ethylene and hydrogen are detected when diethyl disulfide is used.     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

Multi-step transformation in numerical renormalization group

We compute the temperature dependent magnetic susceptibility of the single-impurity, two-channel Anderson model with an alternative multi-step numerical renormalization-group transformation, previously applied only to the two-impurity single-channel Kondo model. Compared with the traditional transformation, the new procedure requires substantially less memory and computational time, and opens therefore perspectives for the application of the numerical renormalization-group procedure to more complex Hamiltonians.     

Performance of a Yeast-mediated Biological Fuel Cell

Saccharomyces cerevisiae present in common Baker’s yeast was used in a microbial fuel cell in which glucose was the carbon source. Methylene blue was used as the electronophore in the anode compartment, while potassium ferricyanide and methylene blue were tested as electron acceptors in the cathode compartment. Microbes in a mediator-free environment were used as the control. The experiment was performed in both open and closed circuit configurations under different loads ranging from 100 kΩ to 400Ω. The eukaryotic S. cerevisiae-based fuel cell showed improved performance when methylene blue and ferricyanide were used as electron mediators, rendering a maximum power generation of 146.71±7.7 mW/m³. The fuel cell generated a maximum open circuit voltage of 383.6±1.5 mV and recorded a maximum efficiency of 28±1.8 % under 100 kΩ of external load.     

Use of the nuclear microprobe at the University of Arizona for the study of heavy metal deposition in rabbit renal tissue

Industrial wastes consigned to disposal sites frequently contain substantial amounts of heavy metals. We have successfully applied proton induced X-ray emission analysis (PIXE) in the conduct of heavy metal (Hg, Cd, Cr, As) toxicity studies using precision cut rabbit renal cortical slices. The large beam diameter (4000 μm) of the proton macroprobe at The University of Arizona Ion Beam Analysis facility allowed an overall concentration of the metal(s) of interest in the samples to be determined, but lacked the ability to resolve point concentrations in the tissue. The ability to locate these areas has now been made available to us with the addition of a rastering microprobe (μ-PIXE) to the facility. Studies now being conducted in our laboratory using this micro-technique include analysis of renal tissue taken from rabbits injected intraperitoneally with HgCl₂, K₂Cr₂O₇, and NaAsO₂. The small beam size (3 μm) and the ability to raster this beam over areas of up to 125 μm × 125 μm has allowed regional mapping of endogenous and non-endogenous metal concentrations and revealed trends in heavy metal deposition in in vivo treated renal tissue, significantly increasing the amount of information obtained from these animal studies using PIXE alone. The combination of small beam size, high resolution, and multi-element detection makes μ-PIXE a powerful tool for investigating the impact of non-endogenous metals on the kidney.     

Rheological behaviour of processed avocado pulp emulsions

Shear rate vs. shear stress data were obtained on avocado pulp in water emulsions using a concentric cylinder rheometer and fitted to a power law model. Dilution, as volume fraction of water, had a pronounced effect on the apparent viscosity of the pulp emulsions and the Richardson equation, (η_R= exp.( a φ) for the emulsion viscosity fitted the data well. A mean slope coefficient, a , of 4.57 can be used as a first approximation. Enzymatic treatment (40°C, 1 h), is slightly more effective than thermal treatment (65°C, 1 h), in reducing the initial apparent viscosity of the pulp-water emulsions     

Gas Permeability of Wetwood and Normal Wood of Subalpine Fir in Relation to Drying

Subalpine fir (Abies lasiocarpa Hook) lumber containing wetpockets (wetwood) was used for the measurements of gas permeability and the results were then compared to the gas permeability of normal wood, which was free of the wetpockets. The impacts of pretreatment methods were also investigated, including steaming at green condition, steaming at fiber saturation point (FSP), microwave treatment, and radio-frequency treatment. Results from this study demonstrated that both the transverse and the longitudinal gas permeability of subalpine fir wetwood are greater than that of normal wood. There is no significant change in the permeability after 4-h steaming pretreatment at green condition and at FSP. The impacts of microwave and radio-frequency pretreatments were not significant, but the findings cannot be generalized because they may depend on the power intensity applied.     

Nephrotic syndrome. What is new since the 1988 study?

Hormone-refractory prostate cancer (HRPC) patients often have nonmeasurable disease. In such patients, predictive biomarkers other than tumor response may be required to compare therapeutic effects. We examined the predictive value for survival of various clinical and laboratory parameters, including prostate-specific antigen (PSA), in HRPC patients treated with suramin. Data from 103 HRPC patients were analyzed using various survival analyses, the likelihood ratio approach, and logistic regression analyses. When pretreatment factors, percentage decrease in PSA at 4 weeks from start of treatment (deltaPSA), and updated survival data were fit by a multivariate Cox proportional hazards model, acid phosphatase, lactate dehydrogenase, and deltaPSA were significant, with risk ratios close to 1. There was a decrease in likelihood ratio with increasing APSA. A logistic regression model was developed to predict the probability of <1 year of survival from the start of treatment. Hemoglobin and deltaPSA were found to be significant variables. However, in view of the complexities involving the relationship between PSA expression and prostate cancer growth and possible selective effect of treatment on PSA, further prospective testing is necessary. Therefore, deltaPSA cannot necessarily be used as a biomarker for survival response in individual patients during the evaluation of the therapeutic response of HRPC to new antineoplastic drugs.