Ethylene-propylene copolymers by a supported Ziegler-Natta catalyst based on TiCl4/MgCl2

Ethylene-propylene copolymers have been prepared by using Ziegler-Natta catalysts based on TiCl₄, MgCl₂, PCl₃ and (n-Bu)₃PO₄. The catalysts TiCl₄/MgCl₂/PCl₃ and TiCl₄/MgCl₂/(n-Bu)₃PO₄ were prepared by reacting TiCl₄ with pretreated MgCl₂. The support was prepared by ball milling of MgCl₂ with varied amounts of PCl₃ or (n-Bu)₃PO₄. The addition of PCl₃ has remarkably increased the MgCl₂ surface area in comparison with (n-Bu)₃PO₄. The effects of PCl₃ and (n-Bu)₃PO₄ on ethylene homopolymerization, ethylene-propylene copolymerization and on copolymer properties were evaluated. The catalyst system containing PCl₃ permitted to synthesize propylene-ethylene copolymers with up to 75% (w/w) of propylene and provided control of copolymer crystallinity. The reduction of the copolymer molecular weight distribution suggested that PCl₃ acted as an internal donor, poisoning some active catalytic sites. Received: 2 April 1997/Revised: 6 June 1997/Accepted: 18 June 1997     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

Improving process models by mining mappings of low-level events to high-level activities

While it is possible to analyze the run-time behavior of a business process through process mining techniques, in practice there is often a gap between the low-level nature of the events recorded in an event log and the high-level of abstraction at which the process is modeled. This makes it difficult to understand the recorded behavior in terms of the high-level activities in the process model. Also, it makes it difficult to improve the model based on run-time data about the process. In this work we present an approach to mine mappings between the events in the log and the activities in the model. These mappings can be used to generate suggestions of how the process model can be extended in order to capture the behavior recorded in the event log. Using a real-world and publicly available event log, we show how the approach can improve the model in a stepwise manner, until it covers all the behavior recorded in the event log.     

Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

The toughness of copolymers of polypropylene

A series of fracture mechanics tests of a set of random and impact copolymers of polypropylene, in which the ethylene content was varied, is described. The plane strain toughness is found to change from the homopolymer value, but thereafter to be independent of ethylene content. The yield stress of the impact copolymers decreases markedly with ethylene content, while that for random copolymers increases only slightly. This is reflected in toughness values in tension. A comparison with the behavior of other rubber-modified materials is made and it is concluded that crazing is an important mechanism in polypropylene and is perhaps more rate and temperature sensitive than in acrylonitrile-butadiene-styrene (ABS).     

Design and development of low‐cost optical‐fiber sensors for temperature metrology: Process monitoring of an epoxy resin system

This article reports the design and deployment of two optical‐fiber temperature sensors based on the fiber Fabry–Perot etalon. The first involved the use of an extrinsic fiber Fabry–Perot sensor, but in this instance, the coefficient of thermal expansion of the reflector and/or capillary was chosen to offer a mismatch. Hence, the cavity length could increase or decrease according to the coefficient of thermal expansion of the fiber and/or capillary. For comparison, single‐mode and multimode optical‐fiber Bragg gratings were also used as temperature sensors. The Fabry–Perot sensors operated from ?50 to 410°C. The accuracy of the measurements was up to ±0.5°C with a low‐cost charged‐coupling‐device spectrometer. The sensors also worked effectively in a microwave oven and in a composite panel in an autoclave. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 83–95, 2004     

Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

The effect of H2 treatment on the activity of activated carbon for the oxidation of organic contaminants in water and the H2O2 decomposition

In this work, hydrogen peroxide reactions, i.e. H₂O₂ decomposition and oxidation of organics in aqueous medium, were studied in the presence of activated carbon. It was observed that the carbon pre-treatment with H₂ at 300, 500, 700 and 800 °C resulted in an increase in activity for both reactions. The carbons were characterized by BET nitrogen adsorption, thermogravimetric analyses (TG), temperature programmed reduction (TPR), electron paramagnetic resonance (EPR), iodometric titration and determination of the acid/basic sites. TPR experiments showed that activated carbon reacts with H₂ at temperatures higher than 400 °C. The treatment produces a slight increase in the surface area. EPR analyses indicate the absence of unpaired electrons in the carbon. Iodometric titrations and TG analyses suggested that the treatment with H₂ generates reduction sites in the carbon structure, with concentration of approximately 0.33, 0.53, 0.59, 0.65 and 0.60 mmol/g for carbons treated at 25, 300, 500, 700 and 800 °C, respectively. It was also observed the appearance of basic sites which might be related to the reduction sites. It is proposed that these reducing sites in the carbon can activate H₂O₂ to generate HO^* radicals which can lead to two competitive reactions, i.e. the hydrogen peroxide decomposition or the oxidation of organics in water.     

Catalytic combustion of trichloroethene over Ru/Al2O3: Reaction mechanism and kinetic study

The performance of 0.5% Ru/Al₂O₃ for the deep oxidation of trichloroethene (1000–2500 ppmV, WHSV = 55 h⁻¹) in air was studied in this work. Experiments were carried out both at dry and wet (20,000 ppmV of H₂O) conditions. Catalytic performance was studied in terms of activity and selectivity for the different reaction products (CO₂, HCl, Cl₂, C₂Cl₄, CCl₄ and CHCl₃). Both the activity and the selectivity for total combustion are higher than other catalysts suggested in the literature for this process (especially Pd and Pt).The main organic by-products are CCl₄ and CHCl₃, whereas in all the other catalysts tested in the literature, tetrachloroethene is the main organic by-product. This fact suggests that the mechanism of the combustion reaction, involving a double-bond scission, is essentially specific for this catalyst.Kinetic data was fit to a pseudo-first order kinetic expression, providing fairly good fit.     

Theory of asymmetric organocatalysis of Aldol and related reactions: rationalizations and predictions

Computational studies have led to models to understand some classic and contemporary asymmetric reactions involving organocatalysts. The Hajos-Parrish-Eder-Sauer-Wiechert reaction and intermolecular aldol reactions as well as Mannich reactions and oxyaminations catalyzed by proline and other amino acids, and Diels-Alder reactions catalyzed by MacMillan's chiral amine organocatalysts have been studied with density functional theory. Quantitative predictions for several new catalysts and reactions are provided.