Preparation of Poly(D,L-Lactide/Glycolide) Nanoparticles of Controlled Particle Size Distribution: Application of Experimental Designs

This study investigates the use of the solvent evaporation method for preparing acid and glycolic acid-based copolymer nanoparticles. Initially, appropriate technological and formulation factors for elaboration of polymeric particles were selected by screening. Most favourable results were obtained using polyvinyl alcohol as a dispersing agent and a high pressure homogenizer to reduce the droplet size of the emulsion initially formed. On the basis of the conclusion thus drawn, a composite rotational experimental design was employed to evaluate the joint influence of three formulation variables (phase volume ratio of the emulsion formed, polymer concentration and homogenization pressure) on the micromeritic properties of the suspension finally obtained (mean particle size, coefficient of variation and polydispersity of the particle size distribution). Analysis of variance corresponding to the experimental design, showed a significant influence of the volume phase ratio and the polymer concentration on the mean particle size and the coefficient of variation, whereas the polydispersity is also affected by the homogenization pressure. Considering this information, a 3² experimental factorial design was then selected to investigate the possible interaction between the phase volume ratio and the concentration of polyvinyl alcohol in the aqueous phase. Analysis of variance and subsequent sequencial regression analysis evidenced last hypothesis providing the way to determine the experimental conditions required to achieve a specific particle size distribution.     

A mathematical model for the prediction of temperature in a dry snow layer

A mathematical model for predicting the temperature in a homogeneous layer of dry snow is presented. The model, which is physically based, is capable of predicting diurnal temperature behaviour at the snow surface and at any depth within a snow layer given the variation in a limited set of meteorological parameters over that period. A sensitivity analysis is performed to determine the important parameters in the prediction of snow surface temperatures. These are found to be consistent with simple physical reasoning.     

Mikrobielle Werkstoffzerstörung – Schadensfälle und Gegenmaßnahmen für Kunst- und Naturstoffe: Mikrobielle Zerstörung von Kunststoffen

Microbial deterioration of materials – case histories and countermeasures for plastics and organic and natural materials: Microbial deterioration of plastics Large-scale production of synthetic plastics began in the thirties. The versatility of the new materials was enhanced by new processing technologies and above all by designing special formulations tailored to the different fields of applications. Their increasing universal application was, however, also accompanied by growing records of documented microbial attack. The mechanisms of attack have largely been identified. Damage is commonly caused by surface growth, discolourations and changes of mechanical and electrical properties. National and international test standards have been developed to predict the service life of certain plastics or to evaluate the protection afforded by certain biocides. Several standard methods of test are presented and the criteria for evaluation are critically examined. Finally, the activities of the Plastics Project Group are represented, wich has carried out several international co-operative tests to evaluate the reproducibility of the results of different test methods and has worked out recommendations and improvements.     

Synthesis of fine composite particles for hydrogen storage, starting from Mg-YNi2 mixture

We synthesized new composite particles for hydrogen storage on the basis of an idea of “particle designing”. As starting materials, powders of Mg and YNi₂ were selected. Fine composite particles containing mainly Mg₂Ni could be designed by repetitive hydriding and dehydriding cycles at 673 K. In the synthesis process of the composite particles, the following two points were found to be essential for this technique. The first point is that, after being activated by the sequential processes of hydrogenation, amorphization and disproportionation, YNi₂ reacts effectively with Mg. The second point is that evaporated Mg, which occurs during dehydriding, adheres to the surface of the activated YNi₂ and accelerates a diffusion reaction to form Mg₂Ni at the interface. In these composite particles, Mg₂NiH₄ is formed, even at 373 K, under a hydrogen pressure of 5 MPa.     

Evolution of BET internal surface area in glassy carbon powder during thermal oxidation

It is demonstrated that glassy carbon powder can be thermochemically activated. During activation, a film with open pores is created on the glassy carbon particles. This film has a large internal surface area, which is accessible to liquids and gases. A simple model for the evolution of the internal surface area in glassy carbon powder during thermochemical gas-phase oxidation is also presented and compared with experimental data. Experimental results are in qualitative agreement with the model. We found that a sharp particle size distribution is desirable with regard to potential technical applications.     

A problem of pursuit and evasion

A trajectory problem of pursuit and evasion on a plane is considered for the case of equal absolute velocities of the players. Exact solutions are obtained for fixed initial conditions.Translated from Kibernetika i Sistemnyi Analiz, No. 3, pp. 138–143, May–June, 1992.     

Bisensors for amino acids

Two kinds of biosensors for amino acids (one with nonspecific enzyme as bioelement, the other with specific enzyme(s) as bioelement), including their principles, applications, recent researches and future trends were discussed in detail. 61 references were given. A part of work for gaining Ph. D in chemical and biochemical application at FPMs (Mons, Belgique) Synopsis of the first author Xia Jinlan, Male, born in 1963, now at Facult’e Polytechnique de Mons, Belgique     

p53 in polyoma virus transformed REF52 cells

While cellular transformation by small DNA tumour viruses usually involves targeting the product of the p53 tumour suppressor gene by a virally encoded protein, none of the three polyoma virus (Py) specified T antigens have been observed to interact with p53. We show that primary mouse embryo fibroblasts and REF52 cells, which resemble primary cells in requiring co-operating oncogenes for transformation, cannot be transformed by the Py oncogene, middle T-antigen (PyMT), alone. These cells can be transformed by the complete Py early region, which encodes the Py large, middle and small T-antigens. We find that PyMT can transform rodent cells lacking a functional p53 protein (p53 null mouse embryo fibroblasts and DN-REF52 cells which contain a dominant negative p53). In Py transformed REF52 cells (Py-REF52) there is no significant accumulation of p53 protein, as opposed to SV40 transformed REF52 cells (SV-REF52) in which the amount of steady state p53 protein is elevated. However accumulation of p53 is observed following exposure of Py-REF52 cells to u.v. Treatment of Py-REF52 cells with X-rays results in a rapid increase in the levels of the p53-induced proteins p21/WAF1 and MDM2. In untransformed REF52 cells, X-irradiation causes p53 activation, which results in induction of both G1/S and G2/M blocks. In SV-REF52 and DN-REF52 cells, p53 abrogation results in the absence of both the G1/S and G2/M blocks. Only the absence of a G1/S block is observed in Py-REF52 cells exposed to X-irradiation. Together these results indicate that in contrast to most other DNA tumour viruses, Py does not appear to interfere with the DNA damage induced transactivation activities of the p53 protein but absence of a functional p53 protein can mediate transformation by the PyMT oncogene in the absence of other co-operating oncogenes. Possible modes of transformation by Py are discussed.