Closed-loop optimal control-enabled piezoelectric microforce sensors

This paper presents a closed-loop optimally controlled force-sensing technology with applications in both micromanipulation and microassembly. The microforce-sensing technology in this paper is based on a cantilevered composite beam structure with embedded piezoelectric polyvinylidene fluoride (PVDF) actuating and sensing layers. In this type of sensor, the application of an external load causes deformation within the PVDF sensing layer. This generates a signal that is fed through a linear quadratic regulator (LQR) optimal servoed controller to the PVDF actuating layer. This in turn generates a balancing force to counteract the externally applied load. As a result, a closed feedback loop is formed, which causes the tip of this highly sensitive sensor to remain in its equilibrium position, even in the presence of dynamically applied external loads. The sensor's stiffness is virtually improved as a result of the equilibrium position whenever the control loop is active, thereby enabling accurate motion control of the sensor tip for fine micromanipulation and microassembly. Furthermore, the applied force can be determined in real time through measurement of the balance force.     

棒状液晶分子相变问题的机械旋转模型研究

综述一种关于棒状液晶材料的分子结构与液晶相的相关关系的研究成果。介绍了有关液晶分子的机械旋转模型。该模型将液晶分子视作一种高速旋转的转子,通过分子参数计算,对液晶材料的相变温度和分子结构之间的关系给出了一种全新的解释。最新研究表明,含氟三苯液晶材料的分子结构中存在slim和fat现象,能够对液晶材料的相变进行合理解释。该模型能够通过简单的模型方法对新型液晶材料的分子设计与合成提供有用的信息。     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。     

基于LabWindows/CVI的某型飞机FBW飞行试验台设计与实现

主要阐述了某型飞机EBW飞行试验台的LabWindows／CVI实现。在分析EBW组成及信号交联关系的基础上，设计了PCI总线结构的系统硬件；提出了测试库与测试引擎相结合的编程方法，并着重阐述了测试引擎的实现方法。     

基于闭路电视网络的计算机远程控制

介绍了一种在闭路电视网络上利用DTMF变换技术和调频技术相结合来传输计算机串行控制编码信号的方法，并且将这种控制方法应用到计算机远程广播控制系统中。     

双层堤基的井涌破坏与无害管涌

双层堤基水文地质结构特殊，堤基承压水常具独特的“渗而不流”特征。在“不流”条件下，堤后盖层薄弱处受超高承压水头顶裂破坏，产生的局部冒水孔实属承压自流井，由此形成的管涌实质为井涌。底部进水的承压井流影响范围不大，井涌的破坏范围更小，据此可区分出有害管涌与无害管涌。前者局限于堤脚附近，小范围压渗为首选方案；对后者，既无需专门防治，更不必追求根治。     

EFFECT OF CHLORINATED WASH WATER ON QUALITY OF HEAT SHOCKED MUSSEL MEAT

Chlorine-assisted chilled tumble washing of green mussel meats was done using 5 and 10ppm chlorine solutions maintained at 5 and 10C for 3 min. No significant difference (P < 0.05) was established in terms of meat yield, pH, Aw or sensory qualities for tumble washed samples. The mussel meats were given sensory acceptance ratings of up to "like slightly". A 2% weight gain of mussel meats was established after washing. Heat shocking in tandem with tumble washing affected 1–3 unit log reduction in TPC and coliform counts and about a 4 log reduction in Vibrio spp. counts of mussel meats. The 2 protocols were presented as value-adding steps to improve mussel meat quality. Philippine micro- and small-scale shellfish processors and vendors were identified as potential users of the technology presented in the study.     

信息融合的飞机识别方法

以信息融合的理论为基础，利用从可见光图像序列和8-12μm长波红外图像序列中提取的信息对不同种类飞机进行识别。采用矩特征并结合BP神经网络的方法，分别在特征级和决策级两个不同层次上实现了信息融合。实验结果表明，通过信息融合进行飞机识别的准确率可达到90％以上。